Counting matching models…
3D scan of the Venus of Willendorf optimized for 3D printing. Found in 1908 at the site Willendorf II, the object appeared in an archaeological layer datable to 29,500 BP. Measuring 11 cm, the figurine – made of oolithic limestone –…
I had an old, slow laptop that had not been used for years. I repurposed the screen, using an external controller board, designed and printed a case for the controller board and ‘feet’ for the monitor brackets. The controller board is…
I found a nice design by Billd to protect a LCD controller of the type M.NT68676.2A. Unfortunately they are shipping a newer version now (M.NT68676.3) and the menu buttons don't fit anymore. The new model also has a smaller main board,…
I print this gun for my son (Red Dead Redemption lover). This weapon is a functional replica for kid fun. I use my Prusa MK3s+ with 0.4mm nozzle. Print with silver and white PETG, but in my opinium PLA is better. Only at parts :…
Stand for a S&W 686-6. Source: https://a360.co/3io6zte
Texturized 3D model: https://skfb.ly/otOJV 3D scan of the original Venus of Willendorf optimized for 3D printing. Found in 1908 at the site Willendorf II, the object appeared in an archaeological layer datable to 29,500 BP. Measuring 11…
I had one coupler, needed another. None available local to me, so I drew one up and printed it out of PETG. I designed it a little longer so it would have the same angle, but be slightly larger at the openings, and slightly smaller…
This model is compatible with the lego system.
Modelled for: SPEED BEEZ® Speed-loader for Smith & Wesson® L Frame 38/357 Six (6) Shot (Models 586, 686) the Original “Ejector” SPEED BEEZ® Smith & Wesson 686P Plus Speed Loader 38/357 Seven-Shot the Original “Ejector”
Revolver chamber flag for Smith and Wesson 586/686 revolvers in .38 and .357. Insert into the cylinder to signal that the revolver is empty and safe. Should be able to close the cylinder given enough space. Should probably print this with…
This is a significant remix of another enclosure. I reduced the size quite a bit, moved the buttons, and did not include a mount point for the inverter as my monitor didn't need an inverter board. Category: Computer
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
I have created a remix of the previous stand for the Tugboat 686. The print alignment and the file names have been corrected. Now all files are available in the ZIP and easier to print due to the corrected alignment. You will need: 4 x M2…
Remix for Bondhus 6 piece balldriver set Category: Tool Holders & Boxes
A couple years ago I took apart an old laptop and bought the M.NT68676.2 driver board online. I made a terrible monitor case out of the laptop, some parts from a stereo receiver, and tape and glue. I recently had a reason to use it and…
I create my own model to store my ESP-2686 McUs, specifically the NodeMcu V3 variant.
I recommend to print on one side, try without and supports.
I've been printing for years but recently started to look into doing my own CAD work. Thanks to Michael Laws' Teaching Tech tutorial with OnShape (see video below). I did “my own thing” because I wanted a wall-mount, not a shelf-mount,…
This is a 2x4-grid holder for Bondhus 74686 metric hex ball driver set . This holder is compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and…
Mini S686 Shell Throwing / NERF ENG: Hello everyone 😊 I’d like to start by saying that this is only my second project – I’m still learning, so I hope everything is okay. I bought this toy gun for my son from AliExpress and decided to…
Pour raccorder un embout d'aspiration Festool au gabarit de perçage Wolfcraft 4686 https://www.wolfcraft.com/products/wolfcraft/fr/EUR/Bestellvarianten/Bestellvariante-extern/Guide-de-perçage-mobile/p/P_4686 Inclut les ergots de blocage…
Countersunk the top and bottom for socket head bolts and nuts respectively. An M3x20mm bolt should just about catch the nut and screw in enough to hold it tight. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports:…
This is a remix with a smaller bearing that I had available
Object: Quite expensive car broom scraper bought on CircleK. Model: Schou 6866RS - telescopic scraper with rotating broom. Part: Lever for telescope. Description: The most expensive carscrapper from Circle K, looks great, works nice - to…
Lithophane Revolver Prusa MK3 Print: 0,10 Detail / upright / PLA white / do not change the size
Umarex Smith & Wesson CO2 586 / 686 drum magazine 4,5mm Diabolo Metal bushings/spacers are required for proper function and reduced wear. Please use the specified dimensions listed below. The Amazon link is only an example source;…
Sizes 5mm, 4mm, 3mm, 2.5mm, 2mm, and 1.5mm are included. Holes are included for screws or there should be sufficient size on the top to use command strips to lock it in place. Not a lot more to say about a tool holder. If you have these…
Simple box for ICM-45686 sensor with holes for sewing elastic band(30mm) Made for custom pcb https://www.pcbway.com/project/shareproject/ICM_45686_board_11fee337.html
Gridfinity organizer for WIHA Go Box #76868. Version without lettering available in the files tab.
Bondhus Balldriver 6 Piece Set drawer storage organizer.
Spare part for Beninca motorized gate system replacement for plastic nut Beninca 9686873.
Připojení přes střední vložku. Není třeba vrtat. Krytí mikrotrubičky. Tisk s límcem a podpěrami. PETg/PCTG 15% infill
Rotary switch replacement for the Miele M686 microwave
Overview This model is a replacement body for the original Bakelite fuse holder/carrier (Part No. RD3686AU , stamped with 2703 ) used in classic British luxury cars from 1946 to 1955 . The original Bakelite parts often become brittle over…
This model is compatible with the lego system.
Its an enclosure for a TEF8868 Radio. I bought the TEF8868 radio from aliexpress (see link below). The enclosure has now: front speaker 18650 rechargeable lithiumbattery inside stable stand slightly angled backwards…
Rotary switch replacement for the Miele M686 microwave
This is a 2x4-grid holder for Bondhus 74686 metric hex ball driver set . This holder is compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and…
Updated piece 1 : modification to better fit the connectors and ease integration of the card This is box for enclosing an electronic card for a laptop screen. I wanted to reuse the screen from an old laptop, so made an enclosure to put…
Wallmount desigend for FRITZ!Box 6860 5G. The original mount is for window mounting, so i don't see the lights when its mounted on a wall. I made a 20° version to align it directly to the transmitter. Print it with UV-resistant filament -…
A simple STEP model of Waveshare USB-HUB-4U WAV-21686 since I couldn't find one.
Its an enclosure for a TEF8868 Radio. I bought the TEF8868 radio from aliexpress (see link below). The enclosure has now: front speaker 18650 rechargeable lithiumbattery inside stable stand slightly angled backwards…
Umarex Smith & Wesson CO2 586 / 686 drum magazine 4,5mm Diabolo Metal bushings/spacers are required for proper function and reduced wear. Please use the specified dimensions listed below. The Amazon link is only an example source;…
Print time: <24min !! Print Settings Supports: No Resolution: 0.28 Infill: 40% Notes: 220C Temperature and Infill Overlap Percentage 50%, this usually results in extra strong prints with PLA. I use Klipper with resonance compensation,…
![[ALCH] storage tray for Bondhus 74686 metric hex ball driver set (Modubox)](https://media.printables.com/media/prints/481552/images/3935827_11b0dcb4-8fa1-45fe-8bc4-fc1ada852903/bondhus.jpeg)
