32 models
I needed a guide bushing for the smaller holder for the makita router. One I intend to use to make finger joints. The annoying part is that the holes for the screws are not in a nice concentric circle around the axle of the router. So it…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Spacers to determine the distance when milling plasterboard. The first positions the milling machine 20 mm from the rail, the second one another 26 mm for the next milling. Two-color version
Print approx. €2.77–€3.39 excl. taxPreliminary estimate for PETGSource material: PET
This is a handy little box to store spare collets in. 2 compartments, one for 1/4" collets, and one for 3/8" collets. I designed this as I recently lost 4 spare collets. Given how small they are, they're easily lost, but with this box I'm…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for PETGSource material: PET
24cm radius jig for the Makita Router Circle Jig (RT0700CX4). Uses M6 Hex hardware
Die Vorrichtung zum Planfräsen wurde während einigen Twitch Streams entworfen, modelliert und zusammengebaut. Sie wird mit einer Kantenfräse Makita RT0700C oder Makita DRT50Z verwendet. Das Planfräsen von Weichen Werkstoffen wie Holz,…
ReadMe.txt Fraesplatte für Makita RT0700CX2J Oberfräse Anwendung: Die Fraesplatte dient der grösseren auflage auf dem Werkstück beim Arbeiten mit der Makita Oberfraese. Dies ist ein Remake vdes Projektes "Baseplate for Makita RT0700…
A simple replacement plate for the router Print instructions nothing special
Holder designed for fr150 CeNeCe (Alarsys) machine.
For more stability I have merged the MPCNC Tool Mount with a Makita Tool Holder. It fits with the 25mm version (metric). This Tool Mount can be used for MPCNC Burly and also for MPCNC PRIMO. Using 2 parts connected via screws resulted in…
ReadMe.txt Fraesplatte für Makita RT0700CX2J Oberfräse Anwendung: Die Fraesplatte dient der der Arbeit mit einer Frässchablone beim Arbeiten mit der Makita Oberfraese. Material: PLA Schichtdicke: 0,2mm Füllung: 75% Farbe: nach Belieben…
A pen holder for my MPCNC Primo build. It fits a 65 mm tool mount like Makita RT0700C. I have printed this solid bat i think you can do it a little infill... The basic idea was to quickly swap pen and spindle without having to remove the…
Here you can find holders for all devices and accessories of the Makita Router RT0700 (RT0700CX2J). Most of the time i'm using the router at my workshop, so i wanted have quick access to devices and accessories. I designed holders with…
I designed these insert plates for the makita RT700C Router. They help to minimze the gap between the milling tool and the support surface when the router is used upside down with the 195563-0 plunge base. This way, the tilting of the…
Designed for better handling during the milling process. the bigger one is designed to stabilized with an aluminium U-profile 11.5x12x1.5 (glued in) to get more stability. Printer: CR-10s pro Material: PETG Resolution: 0.2 wall: 4 infill:…
Router baseplate to quickly make beadboards. Designed to be used with a Makita RT0700C and this router bit: Freud 20-301: 1/8" Radius Beadboard Bit System with 1/4" Shank To use the baseplate, notice that there is one edge with a square…
‿︵‿︵ʚɞ『 Français 』ʚɞ‿︵‿︵ The description in English is below Attention Cet objet est un accessoire qui se monte sur un outil qui peut s'avérer dangereux et provoquer de graves blessures s'il venait à casser ou mal utilisé. Si vous…
ReadMe.txt Fraesplatte für Makita RT0700CX2J Oberfräse Anwendung: Die Fraesplatte dient der der Arbeit mit einer Frässchablone beim Arbeiten mit der Makita Oberfraese. Material: PLA Schichtdicke: 0,2mm Füllung: 75% Farbe: nach Belieben…
Erst einmal vielen Dank an den Ersteller der Vorrichtung. Für meine bestehende Planfräseinheit (Lienearführung SBR16 1500mm x 1000) habe ich den "Fräskorb" und die "Läufer Quer" so angepasst dass diese mit den Linearführungsschienen SBR16…
Box to protect the new inner-tube for your 28"/700c bicycle. I use it for the Schwalbe SV17 on my trekking-bike. inspired by cbikers box: https://www.thingiverse.com/thing:803397 Category: Sport & Outdoors
Bohrlehre fuer Makita RT0700CX2J Kantenfraese. Die Bohrlehre dient der Übertragung der Maße auf ein Werkstück. Sie ist gedacht, um Vorrichtungen, wie z.B. Fräszirkel, anzufertigen. Die Vorrichtung beinhaltet drei rechtwinklige…
This base is used to adapt Metabo Rail with Makita router RT700C
RF-RT0700C (~Makita RT0700) trim base plate router
Whether you're contemplating a change of wheel size, or just want to know the maximum tire size that will fit in your frame or fork with your current wheelset, this tool will remove the guess work.* Based on the idea of the checker…
A rough copy of the mudguard bracket for the 700C x 44mm wide, Flinger branded, mudguards. This bracket is on the rear mudguard, but can be used on the front as well. I have made the mounting tab thicker (3mm) and added some larger…
to attach the Makita Router to lineair rails with 4 MGN12C carriages to cut aluminum extrusions at a straight angle like shown here: https://hackaday.com/2022/05/20/square-cuts-on-aluminum-extrusion-no-mill-required/ Printing at 0.2…
Adapter for Makita RT0700C milling machine. With extraction for vacuum cleaners with esystem 35mm You need use 5mm screwe and nuts + 8mm rod (could be with thread.
Made this after seeing a few people cut the funnel part of the stock stay bracket, made this in case anyone wants to print or CNC one out. I suggest printing out of ABS however mine is PETG and seems fine on my short test ride
My new bar end mirrors were missing a piece so I made this to use the OEM Bar end tensioners. simple but works
1st prong is for 26inch (559 ETRTO) 2nd prong is for 700c/27.5inch (584 ETRTO) Connect the two parts using an M5x20mm screw. Do not press the gauge on too hard. It is intended to fit loosely for easy swapping between sizes. tire sizes…
Made this after seeing a few people cut the funnel part of the stock stay bracket, made this in case anyone wants to print or CNC one out. I suggest printing out of ABS however mine is PETG and seems fine on my short test ride
RF-RT0700C (~Makita RT0700) trim base plate router
🛠 Rail Guide for Makita RT0700C Router on Festool FS Rail This guide, designed for the Makita RT070X (tested with RT0700C ) and Festool FS rail , provides a robust solution. The system efficiently utilizes Makita's existing mounting…
