Counting matching models…
The FAN RETURN can be used with or without the following HEPA filter cartridge. https://a.co/d/hSXwPuz The HEPA filters main purpose is for noise attenuation. Use the “FILTER_BLANK” if not using the filter or use…
This is the King's Castle set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but…
Off-lease business computers are one of the best ways to get decent (if slightly older) hardware for cheap. I grabbed a optiplex 7040 with a i5 6500, 16gb RAM and a 512GB SSD for less than $150. The down side is that the OEM PSU isn't…
This is a mount for the WS7040 fan and its driver PCB. It is meant to fit on an aluminum extrusion. Tested to fit a Voron 2.4 but could probably fit several other printers as well. I've tested it to fit at the back of a Voron 2.4's gantry…
The cap can be printed in any material and without any supports, if it is flipped upside down. For the adapter use TPU. I used SainSmart TPU with 95A shore. I added a cable tie for extra security, but the friction should be strong enough…
Nice fitting enclosure for CPAP cooling fan driver with din rail mount. Mount taken from Voron Design. Designed for self tappered m2x10 SHCS (4 pieces), but you can edit STEP file for your need.
The ws7040 fan has not found a better way, so I designed this simple version of the fan mounting base, the driver board is installed behind, if you have a better idea, please let me know. Installation requirements: If the fan is installed…
Easy way to attach WS7040 to wall using two side tape or bolts. First attach fan to mount using 3 screws then attach mount to one of panels using 2 side tape or bolts. In my case tape works without any issues for 2 months.
I wanted to incorporate remote part-cooling, while also retaining the slight negative chamber pressure that was generated by the exhaust fan.
With these caddies, 3x 2.5in SSDs can be installed in place of the single 3.5in HDD and low profile optical drive of a Dell Optiplex 7040 SFF. This will max out the available SATA slots on the motherboard, allowing for maximum storage…
UPDATE V1.1: I noticed some things weren't reflected in the model. FIxed and reuploaded. Reference model of CPAP blower fan model 10ws7040 often sold by Mellow as a part cooling solution. You can get this fan here:…
Changelog (day/month/year): 15.02.2026 - I’ve made the design free (open price) and changed license to Public Domain. You can support my work on Cults3D by donating any amount, or by paying any of my models on Printables Store on Cults3D…
A simple solution to mount a WS7040 fan to an aluminium extrusion. Includes a housing for the PCB, too. This is designed with a BLV mgn cube in mind, but can be used on others, too. Needed screws: PCB: 4x M2x6mm self tapping screws and 2x…
Hardware: 12x M3 8mm Screw (for BOX and Board Cover) 12x M3 4mm Voron Heat Insert (for BOX and Board Cover) 3x M3 8mm Self Tapping Screw (for CPAP Mount) The printer in action --- Commercial Use --- By purchasing this design on Cults ,…
Changelog (day/month/year): 15.02.2026 - I’ve made the design free (open price) and changed license to Public Domain. You can support my work on Cults3D by donating any amount, or by paying any of my models on Printables Store on Cults3D…
An air-inlet spacer for the Framework Laptop 13 (AMD Ryzen 7040) which fits on Prusa i3 mk3 print-beds. Based on Choumarin's bottom spacer for framework laptops . For a quick summary, see Differences of the remix compared to the original…
Hardware: x8 M3 8mm x8 M3 Voron Heatinsert x4 M2 Selftapping (for board) x3 M2.5 Selftapping (for cpap) Hello, I designed the Jaw Mount. That mount and cpap duct was designed for my friendo and it worked for him. The design needs very…
This is a mounting enclosure for the WS7040 blower fan that mounts to the 2020 or 3030 extruded frame. The lid is designed for the M3 heat inserts. It has a adapter for the standard sized CPAP hose about 18mm internal diameter. Fasteners:…
This is a remix of a thingiverse file to fit 3 hard drives. I made an optional 80mm fan bracket too. https://www.thingiverse.com/thing:5894917 Go rate the original if you like it. They did a great job.
I use my k1 with chc pro (so for unicorn you need to make it longer for 2mm) And also i don't use mcu on a head, so i am not sure that it will fit to the stock k1. prints without supports
This is a model I made for a friend, of the little glide piece for the curtains of the VolkswagenTransporter T4. Best to be printed without brim, and with very delicate tree supports. Use a 0,10mm height for the layers.
Remix of the “Fan Return” air part section for deal with panel screws & some tweaks.
Here's a flap valve-gated, WS7040-powered CPAP blower for precise and powerful parts cooling! The WS7040 electronics are integrated right in the model, and the flap valve uses a Creality Ender 3 stepper motor that you might already have…
Da ich überraschend wenig Wandhalterungen für mein OptiPlex Modell gefunden habe, habe ich mir ein eigenes unauffälliges entworfen und in onshape konstruiert. Wird mit 4 kleinen Senkkopfschrauben festmontiert und sitzt recht straff drin…
Want to make your Club V series speakers look decent again, but found out a replacement badge isn't sold anywhere? Print your own faithful reproduction! Category: Electronics
This a remix for WS7040 Driver PCB. Mounts via M2 Scres to M2 brass inserts.
A simple mount for the Husky brand air compressor filter HDA70403AV. Attach to the filter with an M4x8 bolt and then to your surface with whatever length M4 hardware you need. I printed mine with 4 perimeters, 50% infill, 0.25 structural…
Very simple LC connector cable protector for Optiplex / Wyse 7040. This is NOT a cover, instead it covers up the metal parts that allows cables to run through safely. Currently, I have low profile SATA cables running through that gets…
This is a case for a Browne & Sharpe 7040 Gauge. No supports needed, although if your filament isn't super dialed in you might want to add supports for the t slot that the lid slides into.
Fits 2 slim 3.5inch drive without any bulging from the side panel. You might be able to fit full thickness 3.5inch drives but with a lot of bulging since the slim drives just perfectly fit. The bottom screw where the hdd lock would…
An air-inlet spacer for the Framework Laptop 13 (AMD Ryzen 7040) which fits on Prusa i3 mk3 print-beds. Based on Choumarin's bottom spacer for framework laptops . For a quick summary, see Differences of the remix compared to the original…
Da ich überraschend wenig Wandhalterungen für mein OptiPlex Modell gefunden habe, habe ich mir ein eigenes unauffälliges entworfen und in onshape konstruiert. Wird mit 4 kleinen Senkkopfschrauben festmontiert und sitzt recht straff drin…
This is a remix of a thingiverse file to fit 3 hard drives. I made an optional 80mm fan bracket too. https://www.thingiverse.com/thing:5894917 Go rate the original if you like it. They did a great job.
Here's a flap valve-gated, WS7040-powered CPAP blower for precise and powerful parts cooling! The WS7040 electronics are integrated right in the model, and the flap valve uses a Creality Ender 3 stepper motor that you might already have…
Changelog (day/month/year): 15.02.2026 - I’ve made the design free (open price) and changed license to Public Domain. You can support my work on Cults3D by donating any amount, or by paying any of my models on Printables Store on Cults3D…
Changelog (day/month/year): 15.02.2026 - I’ve made the design free (open price) and changed license to Public Domain. You can support my work on Cults3D by donating any amount, or by paying any of my models on Printables Store on Cults3D…
Changelog (day/month/year): 15.02.2026 - I’ve made the design free (open price) and changed license to Public Domain. You can support my work on Cults3D by donating any amount, or by paying any of my models on Printables Store on Cults3D…
Nice fitting enclosure for CPAP fan driver.
I printed this model for collecting debris from Bosch 1617, but it looks like my vaccum hose is not a standard 1.25inch – https://www.printables.com/model/548380-bosch-1617-fixed-base-dust-collection-adapter-125- I created this adapter.…
This adapts the 7040 fan output to a 15mm tube commonly used in CPAP tubing (no rubber grommet)
This model is compatible with the lego system.
Wall mount for securing an Optiplex 7040 SFF-Mini to a wall. My intended purpose for this was as a secure mount for a 7040 being used as a BlueIris DVR. The 4 core i7 Variant has enough CPU/GPU onboard for 6 IP Cameras. Good for smaller…
Added ability to use included inlet filter and cutout so that risers are not required to mount board.
Lots of time spent to get fitment right and some sanding will be needed… The whole idea is to densify hard drive storage space in a small form factor machine that can be used as a NAS or network area storage server on the cheap. There is…
A small board to mount the driver for a WS7040 blower fan often used for CPAP cooling.
A strap mount i made to mount the 7040 Micro PC to your wall. It is able to print in place without supports quickly.
Made to mount the power brick for the Dell 7040 Micro. This specifically is modeled after a generic amazon one i got. I am unsure how it fits with the name brand mode. Printable without supports.
Cpap muffler i made to fit my own custom build. Maybe some of you can use it for your own build. Has not been tested on a printer yet but i dont see why it shouldn't work. Here are some of the thing you need to order for it to be built.…
WIP: It sort of fits the trimmer but is untested as to how long the beard is after trimming! Trimmer adapter (5 cm) for Braun BT7040 Print instructions Category: Bathroom Summary WIP: It sort of fits the trimmer but is untested as to how…
Mellow's WS7040 follows this drawing: https://ae01.alicdn.com/kf/S4f4b703484754fffb45822f4229b5e24i.jpg The WS7040 that the original Dan Cernogorsky has a slightly different position for the 3 mounting points.
CPAP WS7040 remote cooling fan mount box for Creality Ender-7
This is a remix of Dan Cernogorsky's WS7040 CPAP fan mount to fit 2020 extrusions, rather than the 3030 extrusions used on the Rat Rig V-Core series. It also integrates the included cable and hose guide for compactness. The width of the…
Created this adapter for the VzBot CPAP muffler as I was experimenting with controlling the noise from my printer. I had already remixed and installed a modified mount for Dan Cernogorsky's CPAP box but wanted to try the CPAP muffler, so…
Print on the side, no supports are needed. Works with: - SPN7040WA - SPN7040BA
A simple 90 degree cpap hose adapter specifically designed to work with https://www.printables.com/model/537863-ws7040-cpap-fan-mount-voron . Install: The blower side is purposely tight to be heat formed for a tight fit. Slowly and evenly…
I had issues with the heat insert holes being too small causing pushed out plastic, and wanted to use it with a 20mm hose. I also fixed an issue where the corner holes in the fan cage had walls too thin to print. Designed to be used with…
Changelog (day/month/year): 15.02.2026 - I’ve made the design free (open price) and changed license to Public Domain. You can support my work on Cults3D by donating any amount, or by paying any of my models on Printables Store on Cults3D…
