Counting matching models…
Obviously using different brand batteries will supply you with different values. Do NOT mix different batteries, or use damaged batteries. In this specific build, I used EVE 2,000mAh 18650 cells, the specs are listed below. The entire…
I needed to transport 16 pcs and 15 pcs was not enough, therefore I made 16 + 1 back up, total 17. Also middle row is shifted so its between two side rows. I like it more.
This holds the Wiha 26197 screwdriver set in a 2x5 grid. The models are parametric, so you can easily adjust sizes to fit your needs. I used my remix of PDXCNC's bins, and made a significant rework to the Wiha Screwdriver tray by Physics…
Heavily inspired by this design, though it is modeled from scratch: https://www.printables.com/model/494301-gridfinity-wiha-7pc-precision-screwdriver-tray-for I did this so that the sets would match nicely in my drawer :) This design…
🎒 DJI Osmo Mobile 7P Rugged Case – Ultimate Travel Protection 💪🎥 This rugged case is designed to safely carry your DJI Osmo Mobile 7P and turns it into a complete vlogging kit on the go! The model only contains the case. As I don't have…
Tool Holder created for the Harbor Freight Pittsburg 7pc Nut Driver Set. Found Here: https://www.harborfreight.com/sae-nut-driver-set-7-pc-69109.html Generated base 5x4x4hi base using jdegs' Filled-in Gridfinity Boxes CadQuery script…
Holders for Harbor Freight's Pittsburgh Metric and SAE (Imperial) Metric Long Ball Hex Socket Sets. These are based on @ICEngineering's model for the Husky 7-pc Metric Long Ball Hex Socket Set . I rebuilt the basic design in OpenSCAD and…
Safety ball that can be used as a 7pin connector holder. There are no joints on the 7pin connector, it stays in place thanks to the tapered design Two version available: with hook for rope and without. Ball size: 49,5 mm (fits EU standard…
This is a case that will fit the case designed by YoDesigNerd DJI Rugged Case for Osmo Mobile 7P Printed on MK3.9 with 0.4 nozzle and 0.2mm layer heights.
Remixed from willindiana's similar set for Harbor Freight Pittsburgh nut drivers. That one ended up being too short for my Craftsman ones, so I decided it was time to start figuring out CAD, and this was a great place to start. TinkerCAD…
Tool holder for Socket Wrench Screwdriver Set 7pcs. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 180mm W - 76,97mm H -…
This model is compatible with the lego system.
This model is compatible with the lego system.
Zapraszam do filmu z budowy akumulatora Li-ion z ogniw 18650 do autka kolegi :), wykorzystane ogniwa 18650 oraz BMS 3s 60A… - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam:…
This is my own, simple creation of heat sink Fan Duct. It's an upgrade from the stock 4010 blower to a 5015 blower, to prevent heat creep on Sovol SV07/SV07Plus and maybe SV06/SV06Plus. I printed the duct in ABS, but PETG or maybe PLA…
Thumb wheel for flysky fs-g7p, replaces the whole wheel. Supports are needed.
Case criada para uso com a tela Nextion 4.3. This Case has build to use with Nextion 4.3 Display.
This is a 3D model of the comet 67P (67P/Churyumov-Gerasimenko) based on the data captured by the Rosetta space craft and published here by the European Space Agency: https://imagearchives.esac.esa.int/index.php?/page/navcam_3d_models…
Has a thick bottom to fully protect camera lenses. Prints with or with out supports depending on printer settings and fan capabilities.
Use these files for the carbon fiber beam by Mellow / 247printing: https://s.click.aliexpress.com/e/_DEsgqyl (Affiliate link) Print according to Voron specified print settings. ZIP contains STEP and STL files oriented for printing.…
I had to change the design a little while swapping the rims around some of them had different offset so i added some different heights
Originally published here: 67P/Churyumov-Gerasimenko scaled one in eighty thousand by tato_713 - Thingiverse These models were rendered using MATLAB R2016a the model of the Rosetta spacecraft from the PDS site. This comet is too complex…
I bought the Kenwood and I needed a vertical disc holder. I designed this support that has the disks staggered to optimize space. The strange shape is to save time and material during printing, but in the end it also gives character to…
This Tray is for the Husky 3/8 in. Drive Master Bit Socket Set (37-Piece) Model # H3DBS37PC this also holds the short and long husky bit adapters. The two rows that are raised are to lift the bits into the pockets of the lid to help hold…
Sturdy and nice looking screw driver wall mount for 7 screwdrivers. The inspiration came from a design I have seen somewhere, but I could not find any STL of it on any 3D model site and hence I modeled this from scratch. Credits to the…
Slice at 0.20mm layer height in your favorite slicer with your settings. Feel free to try and tweak your settings for best performance!
RADTEL RT-950 ,HIROYASU HI UV-850pro, BAJETON BJ-9000 bicycle holder for handlebars from HF7POL
Tool holder for 7pcd VDE Screwdrivers set. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 108,58mm W - 75,73mm H - 69,75mm…
Socket holder for the 17pc Olsa Tools Stubby Impact 8-24mm 3/8dr set. Should also fit the Astro and Husky rebrands.
Replacement of boot curtain clip for Touareg 7P OE No 7P689877345
GT2 Pulley 20teeth for Minebea 17PM-K374BN01CN Pulleys for a cheap 3D Printer (Prusa Clone) The Minebea Motors a very cheap (about 2,50$), and i know the voltage is very high (10,4V) but with RAMPS 1.4-1.6 works perfect. Stepper…
its a better and cooler case and better to print!
All the holes are Ø8,4mm Printing: i used PLA, but recommed PETG or ASA 15% Infill - Cubic pattern 4 Perimeters Support: Only on build plate - and Brim
A compact and durable 12V battery holder designed for lithium 18650 batteries. Perfect for building custom battery packs, DIY projects, and portable power solutions. Securely holds and connects 18650 lithium-ion cells for efficient energy…
Connector housing, Dupont 7Pin 12mm Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
This is a parameterized encoder mount, allowing for complete customization.
infill: 25% or more layer height: 0.12mm or less
USB dongle holder for SteelSeries Arctis 7P (PS5) so you can mount it to the PS5's panels for a better signal reception and a cleaner look of your gaming area. Two versions available : - Minimalist for a classic look (print with 0.4mm…
Benötigte eine Druckfläche von 280mm Maße sind 280x180x10 Layerhöhe 0,2mm sollte ausreichen. Bei Druck mit Dichtung, die eingefärbten Bereiche einem anderen Material wie TPU oder TPE zuweisen.
I frequently lose my lose specialty bits, so I made a simple modification to the "Gridfinity BIN Master / Blank" to accommodate the Pittsburgh 17pc. E-Socket & Star Bit Set from Harbor Freight. This may work for other socket sets, but I…
This is a toe clip adapter or mounting bracket that replaces the front reflectors on Rockbros K307PT Mountain Bike pedals, making it possible to install toe clips. It is durable and fits well. However, it does require you to drill two…
Tool holder for 7pcs vde screwdriver Set. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 110.6mm W - 164mm H - 61,08mm We…
This is a soft case for the iPhone 17 Pro. The camera guard is a separate part, allowing you to switch between different designs. I’ve included the CAD data for this part, so please feel free to create your own unique camera guard! I used…
Source file from this ESA page: http://blogs.esa.int/rosetta/2014/10/03/measuring-comet-67pc-g/ Inspired by the amazing work by ESA, the Rosetta and Philae spacecraft and probe, and all the people who've worked on them, I wanted to make…
Holder for 21700 cells arranged to maximize space 5 and 6 cells wide with position fixation on top of the battery added cutout for nickel strip . Also welding plan (hope no mistakes here :D I am just preparing that for the battery build -…
With this part you can repair your broken off handle of your Kenwood KAH647. Just unscrew the screw at the bottom and the two screws holding the handle. Screw it to the printed part and your good to go. I did print it with 0,16, 4 Layers,…
I wanted to recreate the professional-grade laser tag experience you find at commercial arcades. After a year of trial and error, I finally have a working prototype—completely themed in a Fallout style! I started with the amazing 3D model…
I bought the set off Amazon: https://a.co/d/gRFesgV I saw there are other sets that look exactly the same by different sellers, they should also work, but are not tested. They are often sold under “RC Hex Driver Set”, and I have seen a 4…
I purchased this calibration kit and decided to make a Gridfinity box for it.
This is a custom-designed, print-in-place case to neatly organize the common 7-piece screwdriver and nut wrench set used by RC hobbyists for cars, drones, helicopters, and FPV equipment. I tried to use @Ittek_1490595 (Robert Bogusz) model…
A gridfinity based holder for the IDEAL Electrical 35-936 Torque Screwdriver Kit. 2x5 with magnet holes.
Design Concept The design for this dongle holder offers a convenient and secure way to mount the Arctis Nova 7p dongle, ensuring easy placement and retrieval while keeping the dongle safe from misplaced items. Purpose It is designed to…
its a motor hopefully in the right colours but best of all its a .step rather then a .sd lprt
14mm Dupont version Find out everything you need to know about the connector on my blog: https://nerd-corner.com/dupont-connector-v1-1/ or https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
the holes for the pins is bigger then the pins because in the bed layer all the holes are smaller, I needed to push the pins with force - use table to do so.
I previously made a dock for my Sony Xperia XZ1 in the same way. ( https://www.thingiverse.com/thing:3021838 ) So I made one for my OnePlus 7Pro. This dock fits with the phone and the clear case that comes with the phone. Video:…
This is my very first model: the base part is a mount for those cheapo aliexpress thermometer/hygrometer instruments to mount them above the Z-axis. The top part is a remix of Charles Timkos fancy base gridfinity model. Made for the Sovol…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
A lid to print with the original model base, removes a box shaped face on the inside of the lid. Also positions the logo object for easier printing, either change colour by object for AMS/CFS, or print the whole object as one colour.
18650 3s7p Wall holder Print at 25% infill
a simple cable clamp for the osmo mobile 7P
iphone 17pro/18pro caseiphone 17pro/18pro caseiphone 17pro/18pro case
I cut the very nice and detailed model in halves using Blender. Prints easily without supports. Category: Physics & Astronomy
Holder for my OnePlus 7Pro to fit with the Brodit mount in my Car (VW Caddy) Print Settings Printer: SparkCube XL Rafts: No Supports: No Resolution: 0,15 Infill: 50% Filament: Extrudr GREENTEC PRO Black Category: Mobile Phone
srovnání .17PMCvs.50BMGvs12,7x108
Simple print. Fit is a little loose, so i can slide out the power brick when disconnecting the cable. If you want it to be truly snuck, print it at 99% size. Settings are simple: Layerheight: 0.2 or lower Infill: 25% Gyroid Orientation:…
A30 Avenger SP 17pdr is a scale model STL of a real-world military armored vehicle, designed for tank and self-propelled gun display, diorama building, and collection viewing. You get a detailed 3d printed model suited for wargaming…
This is a model of the Avantco 177PMG123 Replacement Nylon Washer for MG12 Meat Grinder. I modeled it based on the one I have in person measured with digital calipers. ID: 20.22mm OD: 40.34mm Thickness: 8.16mm Designed with Autodesk…
This is a very simple holder for the Girafus Pro-track-tor Model 227PA remote. It comes with a simple belt clip, but that doesn't do much good for mounting it on a refrigerator. So I modeled and printed this, hot glued 3 magnets on the…
Requirements: 1x M3 countersink ± 10 mm (lock ring) 2x M3 screws to adjust/reduce the default wheel angle of 35 degrees as required (Make sure the screws are nicely flat where they touch the angle bar) Needle file for finishing…
Project Name: Custom Handle for LocknLock Thermal Tumbler Target Model: LocknLock LHC3257PIK (550ml Pink Vacuum Insulated Mug/Bottle) Purpose: Provides an ergonomic carry grip to improve portability and usability for daily outdoor or…
Print 15% infill with supports everywhere. PLA is ok
Mount/bracket for Pegasusastro power box Advance 2 for ASKAR107phq telescope Use 4 M6x8 to mount on telescope Use 4 M3
I needed to replace a broken bracket for the handle on my Gorilla Cart and didn't want to wait for it to be shipped. A new one was only $5 (plus, I assume, shipping) and includes the actual handle and bars. However, the only thing broken…
any case that is magnum head like a 6.5 PRC will work
This is a Multiboard holder for the Pinecil v2, the CNC Kitchen tip set, and three additional tips. Made to fit inside the big-thread push-fit holes. Pinecil v2 CNC Kitchen Soldering Tips SET compatible with TS100 & TS101…
A lid to print with the original model base, removes a box shaped face on the inside of the lid. Also positions the logo object for easier printing, either change colour by object for AMS/CFS, or print the whole object as one colour.
All the holes are Ø8,4mm Printing: i used PLA, but recommed PETG or ASA 15% Infill - Cubic pattern 4 Perimeters Support: Only on build plate - and Brim
This is a case that will fit the case designed by YoDesigNerd DJI Rugged Case for Osmo Mobile 7P Printed on MK3.9 with 0.4 nozzle and 0.2mm layer heights.
Simple print. Fit is a little loose, so i can slide out the power brick when disconnecting the cable. If you want it to be truly snuck, print it at 99% size. Settings are simple: Layerheight: 0.2 or lower Infill: 25% Gyroid Orientation:…
Requirements: 1x M3 countersink ± 10 mm (lock ring) 2x M3 screws to adjust/reduce the default wheel angle of 35 degrees as required (Make sure the screws are nicely flat where they touch the angle bar) Needle file for finishing…
RADTEL RT-950 ,HIROYASU HI UV-850pro, BAJETON BJ-9000 bicycle holder for handlebars from HF7POL
Sturdy and nice looking screw driver wall mount for 7 screwdrivers. The inspiration came from a design I have seen somewhere, but I could not find any STL of it on any 3D model site and hence I modeled this from scratch. Credits to the…
USB dongle holder for SteelSeries Arctis 7P (PS5) so you can mount it to the PS5's panels for a better signal reception and a cleaner look of your gaming area. Two versions available : - Minimalist for a classic look (print with 0.4mm…
This is a fast, inexpensive and useful print - I use a 0.6mm nozzle in vase mode and then can plant 7 seeds in one pot (number seven in the center). I used wood PLA filament. Scale for your plant size need.
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
If you have this amazing low consumption computer with some external HDD as server, this might be helpful for you.
Pegboard holder for any 7piece imperial twist or drill bits. Made for the Colt 7 piece brad point set.
I Flipped it and printed it on its face. Will print either way tho.
Customizable speaker plates for arctis nova 7/7x/7p You can print it whatever colors you like. Put on top of them any additional models Plates size same as origins. Round holes suitable for magnets 5mm diameter 1mm height. Rectangular…
Simple stand for Flowerski. This one is for 7pcs. Let me know in coment if you like it.
