Counting matching models…
motor cooling fan mount for Awesomatix A800MMX various designs slightly adjustable in height, mounting with or without double-sided adhesive tape printing: 0.4 nozzle, 0.2mm layer height 4 walls, 6 bottom and top layers, infill 99%, speed…
motor cooling fan mount for Awesomatix A800MMX
Arche d'éclairage à leds de bureau. 800mm de rayon pour 2 bandeaux de leds. 2 options d'impression: layers 0.2mm, sans supports, avec brim -Imprimer 2 “pieds”, 2 “arc”, 3 “section” et un Outillage d'assemblage -Imprimer 2 “pieds”, 8…
My version of a tweak stick for Awesomatix A800MMX the parts fit on a rod with 10 mm outer diameter I had some aluminum tubes with 10 mm outer and 8.2 mm inner diameter lying around simple version: use o-rings to hold the printed blocks…
Solar filter for the Canon RF 200-800mm F6.3-9 IS USM lens. This solar filter fits nicely on the end of the lens. You will need the actual solar film to construct this as the 3D printed parts are only the frame. You can buy this on Amazon…
Vixen Dovetail Bar for Canon RF 600mm or 800mm F11 IS STM Lenses This is a standard Vixen-compatible dovetail bar that attaches to Canon RF 600mm or 800mm F11 IS STM lenses. These lenses don't have a rotatable foot, just a mount built-in…
Solar filter for the Canon RF 800mm F11 IS STM lens. This solar filter fits snugly on the end of the lens. You will need the actual solar film to construct this as the 3D printed parts are only the frame. You can buy this on Amazon or any…
Vixen Right Angle Dovetail Bar for Canon RF 600mm or 800mm F11 IS STM Lenses. This is a standard Vixen-compatible dovetail bar that attaches to the Canon RF 600mm or 600mm F11 IS STM lenses and holds them at a right angle. These lenses…
Vixen dovetail (100mm long) for Canon RF 200-800mm F6.3-9 IS USM lens. This attaches to the foot. I'm using it to connect my lens to a SkyWatcher SolarQuest solar tracking mount. You'll need one 3/8-16 x ½ UNC and one ¼-20 x ½ UNC socket…
3D Printed Replacement Nose Gear for FMS Ranger 1800mm This is a 3D printed replacement part for the nose gear of the FMS Ranger 1800mm. The original aluminum gear can easily break during rough landings, so this part provides a more…
The Samyang 800mm f/8 mirror lens has an incredible $-to-mm value. However it is very hard to focus and not very sharp. Inspired by a blog article I designed this sliding aperture ring. This aperture ring reduces the aperture helping with…
It uses 28byj-48 stepper motor modified to bipolar for use with stepper sticks and arduino. So far it works with arduino stepper board and simple firmware that receives command via serial port. In first step I plan to create custom…
FMS 800mm Beaver Wing Strut Replacement I managed to break one of the wing struts on my FMS 800mm Beaver and decided to model a replacement instead of ordering new parts. This is a complete one-piece replacement strut that fits either the…
This is a replacement part for the quick disconnect of a 800mm Dewalt clamp. Print with 100% infill for best strength. Avoid printing in the orientation where the layer lines are the sheer point. Use CF Nylon for even more strength if you…
Piezas optimizadas para camas de nos mas de 200 200 180 mm Se recomiendoa rellenar de espuma de pulietireno espandido los huecos realizados en el interior. Boquilla de 0.8mm Altura de capa de 0.35 mm Velocidad 50mm/s Temperatura 200º…
Some screws and nuts required. The tripod foot plate is remixed from https://www.thingiverse.com/thing:3932676
En la instalación de guías lineales en la impresora Anycubic Predator sin partes impresas se utilizan unos simples separadores de latón de 13 mm o suplementar otros hasta esa medida para sujetar el carro, al mismo tiempo sirve para…
There are many caster tools out there for the Awesomatic a800mmx/fx but none of them are compatible with the hudy setup v1, the original hudy setup tool. Because they are in front of the setup tool, while for the original hudy setup, they…
This gridfinity holder is designed to hold the Canon EOS RF 800mm f/11 lens. Works also for the EF 100-400 f/4.5-5.6 L II IS USM.
!!! PL: Ważna jest strona mocowania obiektywu, ponieważ uchwyt jest dostosowany do profilu obiektywu. EN: The mounting side of the lens is important because the mount is designed to fit the lens profile. !!! EN: This mount is specifically…
Lenscap for my nikon 800 F/6.3 Z-mount Need minimum 4 screws (M3x8mm), you can use 2 more to fix the spring part, but not necessary
The FMS 800mm Beaver wing is secured by a plastic quick-release wing key located at the rear of the wing. Since this small part can be easily misplaced during transport or field assembly, I designed a replacement that can be printed at…
Solar filter for the Walimex 800mm f/8.0, including a protective box. The film is very thin. Made with Baader AstroSolar Safety Film 5.0 solar film. Buy me a coffee, if you want :)
This is a replacement wing strut attachment base for the FMS 800mm Beaver . The original plastic mounting base on the fuselage can become damaged in a hard landing or other mishap, making it difficult or impossible to securely attach the…
Leitz (Leica) epis 800mm F3.5 lens rear cap
This is a prototype replacement wing strut attachment mount for the FMS 800mm Beaver . It is intended to replace the plastic fitting installed in the wing where the wing strut attaches. This design is speculative and has not yet been…
The Sony 400mm-800mm G lens has a screwed on tripod foot. Most of the time I will likely leave it on, but if removed there is an unpainted hole with an opening into the body of the lens (there's a screw inside, likely for service). This…
![Samyang 800mm motorized focus [WIP]](https://media.printables.com/media/prints/277297/images/2460259_7e04ea58-9819-4a6c-81b5-64c2743a3de5/img_20220822_213447.jpg)
