Counting matching models…
Model description The Boeing 787 is a wide-body, twin engine jet manufactured by Boeing. The 787 is Boeing's most modern and fuel efficient aircraft. It was the first aircraft to rely heavily on composite materials as they make up 50…
Hello Guys, It's been a while...I've done this project couple of weeks ago, but wanted to create an youtube video on haw to build it, but still didn't got the time. Anyway, I'm publishing it and will add the assembly video and the…
Yet another 1:87 - H0 scale train car.... I hope the collection increases soon - need some more work on the model.
These are miniature figures in scale H0 (1:87), a common scale for model trains. The figures have a hight of approximately 2cm. This is a test if figures in such a scale can be printed in an eye pleasing way. All the following figures can…
Diverses entrées de tunnels Ferroviaires et Routiers
This is the second project I post online, is still a WIP, but already with very nice looks, in my opinion, therfore I decided to put it online. My firsrt model can be seen here:…
This is a model of a beer keg in H0 1:87 scale. I designed after dimentions of a beer keg i found online and scaled it down. Six of them can fit on a euro pallet. You can print them standing up and there are no supports necessary.
I've tried to simplify the construction as much as possible... but a blast furnace has a lot of parts. To make it manageable, I've broken the build up into segments/folders. The print number/mirror notes under each file are for the…
You don't have a 3D printer but you need it? Buy on Etsy with Worldwide shipping → buy here __________________________________________________________________________________ IKEA spare part number 10087158 / 10082805 Fits only IKEA…
Print with 0,4 mm nozzle, 0,2 mm layer height and 5% infill. Filaments used for the containers in the pictures: colorFabb (colorfabb.com) RAL 8012 “Red Brown” RAL 7040 “Window Grey” RAL 6037 “Pure Green” PrimaValue (primacreator.com)…
Covered freight car, model 11-270. USSR, 1986. Widely used in Russia. Print instructions Two variants of main body: details marked "V" for "vertical" mode, "H" - horizontal (see the picture). Two variants of underbody: one with fixed…
Hello, this is a model of a HO scale railway wagon, that can make 3 different wagons: Print just the bottom part and you'll have a container platform; Print the bottom part, add some decking and you'll have a platform wagon. Print all…
This is an ol time baggage train cart designed for the H0 scale (1:87). The model is just the top part of the cart. The chassis (the ram) is from "Old railway passenger wagon in scale H0 by UTJTrain, published Nov 8, 2015"…
Customizable miniature figure of a man with pullover and jeans. I attached the blender file so you can generate all the poses that you need. There are some predefined poses and armatures for generating new poses. I was asked to attach my…
This bogie truk set is a complement for a project I started some time ago, but could only finish recently. The set can also be used on other kinds of HO models as well. This set consists on a frame with suspension details with two…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Designed based on the handle of a Dewalt DCF787. I cannot confirm whether this will fit other Dewalt tools. Features Positive retention on the bits so they do not fall out Produces a satisfying snap when bits are inserted into the holder…
Overhead crane for a 1:87 H0 model train scene. More information at: https://enelys3d.netlify.app/The_Overhead_Crane/ My first version of this overhead crane was slightly more detailed with U beams and smaller supporting X beams. I made…
31. Dec. 2023 V1.3: Simplified the hand model to ease printing Auto 9 for “Universal grip hand” added 30. Dec. 2023 V1.2: New Helmet without visor 29. Dec. 2023: Improved the hand for easier printing Based on DUMMY 13 Beta - Oct. 2023…
These figures are completely reworked from one of my first 1/87 test prints ( https://www.printables.com/model/80605-woman-187-scale-h0 ). I created the base model in MakeHuman and exported it via mhx2 to blender. Here I modified the…
This is a variable length ISO container for H0 scale model railroads. The CAD file is parametric. STL files are available for 10-, 20-, 30- and 40-foot variants. Print with 0.4 mm nozzle, 0.2 mm layer height, 5% infill. The containers in…
This model of a europallet is modelled in 1:87. The dimentions are after standaard dismentions for a europallet just scaled down. You can scale it slicer if you need it in another model scale. The easiest way to print the model upside…
Luggage cart with straight or turned handle cart for H0 1:87 scale model train scenes. The luggage cart is a bigger version which one would expect that the station people would use a truck to move around. Some luggage and crates are also…
This container wagon model is printed in parts that are glued together. Detailed building instructions are provided in a separate PDF file. I run several of these wagons successfully on my Märklin model railway. The wagon in the picture…
Diesel depot for model trains H0 1:87 This is based on an actual railroad wagon from “L'Alliance Society An Anvers” dated 1926. I only had 1 picture to go by. The idea is they took the top of the wagon to make the depot tank. Pictures are…
1:200 Desk Model of the Boeing 787-9. The .3MF file contains the parts for the print.
This container wagon model is printed in parts that are glued together. Detailed building instructions are provided in a separate PDF file. The wagon in the picture was printed with a Prusa i3 MK3S+ with 0.4 mm nozzle. The CAD files were…
Remixed version of my dancing bride and groom. I sticked them together so that they are printable as dancing couple. Bride: https://www.printables.com/model/80591-bride-187-scale-h0 Groom:…
You are doing me a big favor by clicking the Like button :-) Mobile home Scale H0 Scale 1:87 Scale 1/87
can be printed together the model needs to be glued together or separately in other colours can be printed without support the Stuka is very realistic Print in place kit card , Assembly required
This model is compatible with the lego system.
2 sizes of crates that I created to be used as freight on a model train wagon note the little hole in the bottom is intentional, it allows you to put a toothpick in there and handle it more easely when painting. Designed for Prusa MK3s+…
Model je remix tohoto modelu: https://3dwarehouse.sketchup.com/model/852b4a8972aa61eff7034dab0beb70c5/Falls-Coal-Hopper-%C4%8CD-Cargo Podvozky jsou remix stavajícího modelu. Vše lepit vteřinovým lepidlem. Přišroubovat podvozky dopuručuji…
These are models of trackside relayboxes as seen in the Netherlands. The models are made according to the dimentions i found in a train magazine. For those intressed Railmagazine 115. I print the relay box seperate from its base, because…
This model is compatible with the lego system.
In honour of Pokemon Go's Turtwig Community day (September 15th) I have knocked up a Turtwig one piece and multi-material model Needs supports... Print instructions Category: Creatures
Hi, there are only a few figures scaled down to 1:87 or h0 on this website so I wanted to upload some too. Its recommended to print this figure on a resin printer due to the small details.
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Small, simple corrugated metal building for H0 1/87 scale modelrailway. It could be a shelter for railroad worker but also a garden shed. Create your own style: Walls with different window openings included. Print all pieces and glue it…
Here is my latest project, a remaster of this Mercedes-Benz Sprinter van that I shared on other platforms a few years ago. I updated the bottom to make it flat and added some little details. I also created a new multi-color version for…
Hello, It's been a while since my last models. Here is a steam rail car made by Austrian company GANZ abot the beginning of the 20th century. The model was used in Bulgarian state railways between 1903 and 1929 under the name BDZ Series…
This model is compatible with the lego system.
This model is compatible with the lego system.
Hot Air Balloon 1:87 H0 scale remix of Gabriel Yuns Desktop Hot Air Balloon with Heart . This is my second remix of the same design (I really like Gabriels design :)). There are only some small differences compared to my first remix but…
Great 1:18 model originally designed by tanner3d . I scaled to 1:87. Dumpster : 21.2 x 11.9 x 13.4 mm Lid : 19.8 x 12.1 x 0.7 mm
This is a small garden shed in 1/87 scale. I sanded and primed the finished print and scratched some wood planks into the primer. After that I printed it and gave it a black wash. Category: Buildings & Structures
Fuchs 301 Crane This is a very famous German machine from “IG-Fuchs”. Build as of 1957 there are 1000's of these around and they exsist in different versions. I choose to make the version with a hook, but you could draw up a bucket to.…
Railcar bogie, model 18-100. Used for most soviet/russian railcars from 1960s till now. Print instructions Three variants of crossbar included: without mounting hole, with one, and full variant with hole and sliders. Real bogie always…
Europallet made for use with 1:87 H0 scale train modelling. I print these in Prusament Vanilla White and then paint and weather them. Printing upside down is the best orientation designed for Prusa Mk3s+ with 0.25 Nozzle !
This HO scale RETRO-TRUSS BRIDGE is a combination of a Walthers Cornerstone Modernized Double-Track Truss Bridge kit (#933-4510) and 3D printed open structure trusses. Use the Walthers truss sides as a template for cutting and mitering…
This is a type of bench/seats found on austrian trainstation platforms. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 0.1mm Notes: I disabled support roofs in Cura due to the added…
Printed in PLA with a 0,25mm Nozzle and 0,1mm Layer Easy to assemble. Should be weathered.
Protection des Quais avec bancs et Panneau de nom de Gare
This model is compatible with the lego system.
After https://www.printables.com/model/80606-model-train-figures-187-scale-h0 this is the next attempt in printing H0-scale minature figures on a FDM-printer. This time layer hight was 0.1mm, nozzle size 0.4mm, print speed 50% The model…
Railroad crossing house/cabin This is based on an real little house, in the ‘Oeverstraat’ te Dendermonde, Belgium. It's part of the ‘Dendermonde Stoomtrein’ railroad. (still in use as heritage line with actual steam engines). I measured…
This model is compatible with the lego system.
This model is compatible with the lego system.
Load for freight car or goods wagon in scale 1:87 H0. Layer height: 0.2mm Support: No Print all pieces and glue it together. I printed it with white PLA. I primed and painted it with Vallejo Model Color. Directly printing in right color…
While "shorty" or “grip only” versions of the Winchester 1887 are somewhat common, the Winchester 1887 was, from the factory, available with full stock. While there were various different styles over time, I chose to model my stock mostly…
The building is 73mm x 97mm. It's modeled after a half-timbered house in Stolberg in the Harz region. I glued together the walls first and used the wall support frame to glue the parts at 90°. After painting the walls the half- timbered…
Update 8.3.24: 1. Ich habe die Torführungen überarbeitet. In den neuen Führungen laufen die Tore wesentlich besser. Die Dateien habe ich ausgetauscht (Torfuehrung_rechtsN, Torfuehrung_linksN). 2. Ich habe neue/andere Tore als zusätzliche…
H0 1:87 scale models of oil barrels in 200L, 120L and 60L sizes. Designed to be printed with a 0.4mm nozzle at a layer hight of 0.1mm. It can be printed standing up and doesn't need supports.
Print with 0,4 mm nozzle, 0,2 mm layer height and 5% infill. Filaments used for the containers in the pictures: colorFabb (colorfabb.com) RAL 7040 “Window Grey” RAL 6037 “Pure Green” PrimaValue (primacreator.com) Black White Red Blue The…
This model is inspired by the Elbarkaden in Hamburgs Hafencity. The footprint is 300x150mm and it's 170mm tall. All walls are split into sections that are assembled by fitting and glueing the taps. All wall sections need to be printed…
Requires only 6x M3 x 30 mm bolts for assembly, with no additional hardware needed. May also fit Fluke 89, 187, and 189, but compatibility has not been tested.
Small, simple building you need on your model railway. It is for the train driver, engineer or some linemen. Scale H0 / 1:87. Print all pieces and glue it together. Layer height: 0.2mm Support: No I printed it with white PLA. I primed and…
H0 1:87 Trainstation Platform, Eisenbahnstation Bahnsteig. You can connect two platform elements with the connector and build a longer platform. You get four versions created for the C-Gleis of Märklin & My World: 1026mm FR like high…
These are brick railway walls to be placed along an embankment of your model railway. The ‘part 1’ prints have five support columns and are the starting point of the wall. The ‘part 2’ prints have four columns and are the follow-ups.…
Breville / Sage Barrista Grinder Gear. Supported models: Express (BES875) - tested Touch (BES880) - confirmed by others These are not available as a separate spare part from Breville (Sage), but are the first to fail if the grinder gets…
This model is compatible with the lego system.
I made the original DeSteiner M1887 2 years ago, and recently I revisited it, so why not making a variant with stock and a long barrel? I combined barrel-tube part 2 and 3 so that I don't have to assemble them and to reduce connection…
einfaches Geländer für die H0-Modellbahn - einfacher Druck
This is remix of Train Station by Pietia. The model has been scaled to 1:87 (H0 scale) relative to the original. Some elements have been remodeled to make the model assembly easier. Doors and windows have been separated from the walls,…
Print with a 0,25 Nozzle, layer is 0,1 mm. You will need to print 4 x the stl to build a stack.
This is a new version of my 1/87 H0-scale miniature figures. This time a woman wearing either a pullover or a hoodie with different hair styles. All different options can be combined in the attached blender-file. I added some…
This model is compatible with the lego system.
Eight mailbox models in 1:87 H0 scale with and without a post. The mailbox of American design comes with and without flag in case you prefer to glue on a standing up paper flag instead. Two mailboxes comes with a separate PLA version…
This is a resin-printed chassis for a 1/87 scale semi-trailer truck. I used cabin and wheels from Herpa Volvo FH16, but it can be used with other models. (There is no 3D model of Volvo cabin in this project!) The goal of this project is…
Construction Helmet for Lego Toilet Paper Holder Man by vvk187 - https://www.thingiverse.com/thing:1996077 Fits the NEWER version of Lego Man The Helmet is based on https://www.bricklink.com/v2/catalog/catalogitem.page?P=3833#T=C
This is my first model posted so please give me some discount on any possible mistakes! :D Here is why I did the model. More than 35 years ago my parents offered me a LIMA train set. Some of my earliest memories are from me and my parents…
Easy to assemble. Weathering recommended.
A small medieval building in H0 scale. The building is symmetrical, so print it twice and glue it together. Inspired by the bridge end-building in the harry potter movie prisoner of azkaban. I printed it in 1/100-scale and used electric…
The Junkers Ju 87 Stuka is a German dive bomber that was introduced in 1936. The Stuka is two-seater, single engine, dive bomber. The Stuka took part in the Spanish Civil War, Invasion of Poland, Dunkirk Evacuation, France, and the Battle…
Jedná se o zjednodušenou napodobeninu spřáhla ROCO.
Print with 0.4 mm nozzle, 0.2 mm layer height and 5% infill. Filaments used for the container in the picture: colorFabb (colorfabb.com) RAL 2003 “Pastel Orange” RAL 5005 "Signal Blue” RAL 7040 “Window Grey” PrimaValue (primacreator.com)…
Rail bike in 1:87 H0 scale. The pictures of the printed rail bike painted in red are create by marklinofsweden . The yellow rail bikes are printed with PLA filament (prior to me owning a Prusa so I think quality could be a bit better if I…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
I started a project of a fire train. I needed a big water wagon, so I designed the 120 t, 8 axl tank wagon. It is a bit big and printing can get tricky. I also printed it with 50% + infill to get some weight. The wheels are standard 10.4…
A man in a suit in 1/87-scale (H0). In the attached blender-file you can generate new poses. The dancing-pose matches the one of the bride figure: https://www.printables.com/model/80588-dancing-wedding-couple-187-scale-h0 Other figures in…
Ich mag es sehr, verschiedene Techniken zu kombinieren. Durch meinen neuen Laser ist eine weitere dazu gekommen. Da ich auch immer schon dem Modellbau sehr nahe stehe, habe ich mal ein kleines Wohnhaus im Maßstab 1:87 (H0) entworfen.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
HO Rerailer for model trains, modelled after the Rix Products design. Includes a few minor supports to avoid having to support the entire ramp when printing. These supports should just snap off when the print is complete. Measuring 29cm…
This model is compatible with the lego system.
This model is compatible with the lego system.
Milk churn and stand for 1:87 H0 scale model train scenes. One churn is slightly easier to print that the other variant. Detail level is quite low since they were designed for printing with PLA filament. I can add mote details on request…
Print all pieces and glue it together. Use transparent filament for the porch/veranda roof for the best appearance. Door and window frame with 2x in filename will be needed twice. Can be painted before or after gluing. I printed it with…
