Search results: 88

DeSteiner Model 1887 - mechanically working Winchester prop gun

Beyerdynamic DT 770/880/990 Slider Replacement

Replacement sliders for Beyerdynamic DT 770/880/990 headphones. Yes, you can buy original replacement parts – for an insane price! Also they will break after a short time again because they are just too fragile. This is a remix of…

PVS 420 thermal vision 50Hz low budget 18650 monocular (256X192, 384X288, 640X512)

UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…

Gridfinity cups height 12 (88mm) collection

Collection of Gridfinity basic cups height 12 (88mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…

Award Medal Blank 88mm Round

This is a award medal blank I designed. It is 88mm in diameter and 6mm thick. The recess is 4mm deep, I've found this is plenty to allow for detail on the face of the award. The loop at the top is sized for 1.5 inch ribbon.

FriendlyElec CM3588 NAS Case Desktop Standalone

“CM3588 NAS Case Desktop Standalone” - pretty much this.

Beyerdynamic DT 770/880/990 Slider Replacement with Logo and L/R Indicators

Remix of a remix of a remix, I really wanted the replacement to be as similar as possible to the original part, so I added a Beyerdynamic logo and L/R indicators. IMPORTANT: Printed with a 0.25mm nozzle using Prusaslicer 2.5 with Arachne…

SpeedyBee Mario 5 GPS Mount for 21x21mm GPS module such as HGLRC M100-5883

This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 21x21 mm HGLRC M100-5883 GPS module on a SpeedyBee Mario 5 frame. GPS mount with GoPro v2: better fit and easier…

Turn 488 Challenge DIY Sim Racing Wheel

Check out our Discord for wiring diagrams and resources on how to build these DIY Sim Racing Steering Wheels! www.discord.gg/turnracing The .zip folder includes: -3d Printable Files -Bill of Materials -CAD Files -DXF Files -Renderings…

GEPRC mark 4 7 inch GPS(BN880) + two sma mount

This is my first design of mount for BN 880 GPS and two sma connector from DJI air unit. Printed in Flexfill 98A with 0,4 nozzle at 0,2 layer height

1988 Mini Racer

LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY! THE 1988 MINI RACER is a mini version of our older 1988 racecar. SIZE / WEIGHT: Total assembly: Roughly 70 x 45 mm Filament: We used roughly 10 g of filament using 5% infill.…

F1 McLaren Honda MP4/4 1988

Maqueta del mitico McLaren Honda MP4-4 de 1988 con el que Ayrton Senna ganó su primer mundial de Formula 1.

Stock for DeSteiner 1887

While "shorty" or “grip only” versions of the Winchester 1887 are somewhat common, the Winchester 1887 was, from the factory, available with full stock. While there were various different styles over time, I chose to model my stock mostly…

Spool Winder Small and Big Clamp for Pastamatic - Filament Spool Winder. https://www.printables.com/model/466883-pastamatic-filament

For better seating …. V2.1 Small Clamp has been reinforced

Breville / Sage Barrista Grinder Gear (BES875 / BES880)

Breville / Sage Barrista Grinder Gear. Supported models: Express (BES875) - tested Touch (BES880) - confirmed by others These are not available as a separate spare part from Breville (Sage), but are the first to fail if the grinder gets…

Desiccant & Small Parts Container with PET Bottle Cap Size PCO1881 Lids (Multiple Sizes w/ STEP)

I needed a desiccant container that was both small and strong enough to throw into an ammo can with bulk loose ammo. There are many desiccant containers but most are either too fragile or designed for certain dimensions that did not meet…

DeSteiner Model 1887 - Long barrel modification

I made the original DeSteiner M1887 2 years ago, and recently I revisited it, so why not making a variant with stock and a long barrel? I combined barrel-tube part 2 and 3 so that I don't have to assemble them and to reduce connection…

Pocket Hole Wood Jig use 688 Bearings or M8/M10 Nuts

3d printable pocket hole jig for woodworking, use high infill and thick walls to prevent part from buckling when clamping. You can use 688 Bearings or M8/M10 nuts as the drill guide. If you want to use nuts as drill guides use an High…

PCO 1881 PET Bottle Cap with Grip

PCO 1881 neck finish standard threaded PET bottle cap. This nozzle works on most soda bottles like Coca-Cola, Mountain Dew, Fanta, etc. Disclaimer: This cap is meant for non-food applications unless manufactured in a material labeled by…

Beetlejuice - 1988

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Mini Wheels - BBS E88

I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…

Vulture 1886 Pattern (Nerf blaster mod for MHP's Vulture)

If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice BOM (on top of the Vulture kit): M3x25mm SHCS qty 7 M3x30mm SHCS qty 2 M3 Nuts qty 9 #4 Screws (3/8" Long) qty 14 5 walls and 99% gyroid for orange parts, 5 walls and…

cessna 188 d scale 1/72

On my cults page you can download planes like this one on a larger scale and detail, they are for sale for 10 euros https://cults3d.com/es/usuarios/ivangonzalezm/creaci%C3%B3n If you want this larger model and with more detail in 1/48…

Beyerdynamic Hinge Slider Replacement/Upgrade for DT770 Pro, DT770 M, DT990 Pro, DT990, DT880, Custom One Pro Plus, TYGR 300 R and MMX300 MK2

Beyerdynamic Hinge Slider Replacement/Upgrade for DT770 Pro, DT770 M, DT990 Pro, DT990, DT880, Custom One Pro Plus, TYGR 300 R and MMX300 MK2

Lego Compatible (88646.dat) Plate 3 x 4 with 4 Studs in Centre

This model is compatible with the lego system.

Bosch Professional GAL 1880 CV Battery Charger Wall Mount Bracket

A wall mount bracket to click-in the Bosch Professional GAL 1880 CV battery charger. There is a channel to support the active air cooling of the charger. Update 19. April 2026: Fits also the BC1880 charger. To take the charger with you,…

Ferrari 488 GTE Wall-mounted

Please click if you appreciate my work :) Experience the speed and elegance of Italian automotive design with this detailed Ferrari 488 replica, crafted specifically for 3D printing! This high-quality model combines realistic exterior…

Heat Set Insert Press (Hakko FX888 & Dremel Workstation 220)

Remix to fit FX888 soldering iron. Uses M3 x 5 brass inserts instead of captive M3 nuts. Requires 2 x M3 12 hex head bolts. Printed in PLA as this is not near the hot parts. It clamps around the part you hold with your hand. If you print…

PRUSA RC3-R (Reduced, 888, A4)

This is a remix of the PRUSA RC3 Face Shield, in 888 format (the holes are 80-80-80 spaced for a standard 4-hole punch, unlike the 80-60-80 of the original). This version is also reduced in height, with a 8mm tall section for the visor…

yoRadio case for IPS 4.0 Inch, ILI9488, TFT LCD 480*320

yoRadio box. More information https://github.com/VaraiTamas/yoRadio.git

Who Framed Roger Rabbit - Jessica Rabbit - 1988

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Bottle Cap (PCO 1881)

A PCO 1881 bottle cap, fits for most soda bottles and other bottles alike (Coca Cola, Fanta, Mountain Dew, Pepsico, etc. I dont have a printer myself but i used standar tolerances, let me know if it fits well. All feedback is welcome!…

IG-88 Droid

This isa model of the IG-11 & IG-88 Droid I have in my collection.

Tascam 488 MKII Gear C

My brother bought this tape machine used and it had a broken Gear C which seams to be a common problem, since there are people selling replacements on ebay. I tried my best to model a replica of the gear and we managed to fix the tape…

Lego Compatible (2588.dat) Minifig Ghost Shroud

This model is compatible with the lego system.

LEGO Beam L (32526 / 43886)

Just LEGO brick :P

LEGO Ferrari 488 GTE Wall mount

A simple but beautiful wall mount for LEGO set Ferrari 488 GTE: https://www.lego.com/en-dk/product/ferrari-488-gte-af-corse-51-42125 Printed in PETG with 0.6 Nozzle 2 perimeters 20% infill gyroid. Hole though is 6mm while the counterbore…

PET bottle cap thread (28PCO1881)

I needed to make something to attach to a PET bottle and couldn't find a model file to import into FreeCAD. So here's one. The model is not really useful for anything (unless you desperately wish to have a ring screwed on top of your PET…

Mercedes benz no1 year 1886 Designer Ed van der Heijden.

Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA The Mercedes Benz No. 1, built in 1886, marks the inception, An iconic vehicle in automotive history's collection. Crafted by Karl Benz, it…

FriendlyElec CM3588 NAS Case for 10" Rack

Measurements from FriendlyElec 3D Data For mounting in a 10" rack Additional 5050 Fan mount and 16mm power button. M.2 Slots not obstructed! 1U height (44mm height) Designed to be printed upright (front facing down) - should be possible…

Harley Davidson Sportster 883

Harley Davidson Sportster 883

moto guzzi MT v88TT wind deflector

Simple deflector on motto guzzi tank (you have to mirror the other side) cc Daník ;)

Doctor Who - Imperial Dalek [1988]

⚫ Imperial Dalek 1988 ⚫ I decided to update this model and redo it from the ground up. I wanted it to be more accurate and colorful and completely without supports. I think it turned out beautifully! More Daleks updates coming every…

Remington HC5880 3mm replacement comb

To anyone who cuts their own hair and keeps it shorter than a few millimeters, I can strongly recommend the Remington “indestructible” HC5880 hair trimmer. The “indestructible” attribute only applies to the trimmer itself, not the plastic…

Sim Knobs 45x23mm for CTS288 rotaries

For use with CTS 288 Rotary knobs with and without button press. The Rotary knobs with button press are MUCH more durable than those without. The spindle for the rotary knobs with button press are .5mm taller and coincidently have a .5mm…

RC Car Wall Mount Compatible with FTX Tracer (Also HBX 16889)

Simple wall mount to hang a FTX Tracer RC Car on the wall. Printed in PLA at a 0.28 layer height with 20% gyroid infill Should be compatible with the HBX 16889 RC Car as it is very similar. Potential for compatibility with other 1/16th RC…

VW Center Armrest Repair Latch Clip / Armlehnengriff Drucktaste / VW 807688/c

VW 807688/c - VW Center Armrest Repair Latch Clip Ersatzgriff für Armlehne diverser Modelle aus dem VW Konzern (VW Golf IV; Skoda Fabia,...). For printing rotate the two clips 90° to position them flat on printbed. 2020-05-29: New version…

Honeycomb Hex Wall - Larger & Stronger Hex shelf 88x88

88x88 mm Shelf: Needed a larger shelf to hold a few photography light modifiers. Made this thicker, larger, and stronger then the original shelves.

885 or 755 Motor Mount Bracket

This is a strong 3d printed electric motor mount for Chinese 885 and 775 12/24v dc motors. PLA 0.4 print nozzle Nozzle temp 210C Bed temp 60C Standard 0.2 layer height 9 hours to print all 4 pieces at standard settings

Cisco 8800 8851 IP Phone Wall Mount Bracket

The official Cisco part for wall-mounting 8800-series IP phones has been getting increasingly scarce and expensive as of late, so I set out to make a 3D-printed alternative for use at work. Additional Materials Needed: - 2x M3x6 machine…

88mm Kwk 36 HE Shell

88mm Kwk 36 HE Shell This Shell was used in the Tiger I Tank. It’s not 100% accurate but I think it’s pretty close. It's not meant to be a historically accurate replica, just close. It has been designed to fit the projectile by AskaLooN…

VW Beetle BAJA BUG - 1/16 RC (HBX 16889) Adapter

You can find the BAHA BUG body here . You do not need to scale it up the 1/18 scale fits as in the pictures. I used 10lb velcro and you need to use it sparingly as it is quite strong. Body: Here Buy me a coffee:…

Lego Compatible (88286.dat) Minifig Hair Female Ponytail with Long French Braid

This model is compatible with the lego system.

701881979A armrest plug for VW T4 1996-2003

About model My custom design of armrest plug for front seats in Volkswagen T4. Made for a friend's Multivan. Compatibility For T4 Multivan / Caravelle / California. Model year: 1996 to 2003. Diameter: 35 mm Modifications I optimised…

Lego Compatible (88295.dat) Minifig Armour Shoulder Pads with Top Spikes

This model is compatible with the lego system.

Lego Compatible (4488.dat) Plate 2 x 2 with 1 Wheel Pin

This model is compatible with the lego system.

ASUS RT-AX88U Pro (AX6000) router wall mount

Print two brackets, mount them ~14cm apart on the wall. Optionally, if the power cord is not long enough to reach without lifting the power brick, there's a power brick holster which can eliminate the tension on the power cord. See the…

Propeller protector for Drone Pro/E88/E99/E58 - Nubs removed

A propeller/wing protector for the inexpensive Drone Pro/E88/E99/E58 drone. This drone is a knock-off of the toy quad-copter, the “Eachine E58”. You can easily find this USD $20 drone on marketplaces such as Temu and AliExpress. Tested…

iPhone Continuity Camera for LG monitor (27UN880)

Holder to attach iPhone to LG monitor (27UN880), the iPhone works as Continuity Camera during video calls.

Lego Compatible (41889.dat) Minifig Body SW Super Battle Droid

This model is compatible with the lego system.

PCO 1881 PET Bottle Nozzle

PCO 1881 neck finish standard threaded PET bottle nozzle. This nozzle works on most soda bottles like Coca-Cola, Mountain Dew, Fanta, etc. I have used this for paint applications, and it works well if you open up the hole with an XACTO…

Prop Bottle Silencer adaptor - PCO1881 to 14mm CCW / 1/2-20 UNF thread

Little part to fit a plastic bottle to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included. This is to make a prop. While a big bottle has a…

1988-94 GM c1500 Radio Pocket

1988-94 GM c1500 Truck Radio Head Replacement Pocket Based On American International GMP333 Design. I've never printed this. I just designed it in CAD so that I could preview what various OLED screens might look like in the unit and how I…

VW Golf 1 Cabriolet Facelift (1988-1993) 4-round Grille Screw Caps

The “real” Volkswagen counterparts to these models have a propensity to spontaneously vanish from the vehicle, due to aging plastics and a harsh, vibration- and wind-heavy environment. I have literally never seen an actively-driven…

Die Hard - McClane in the Vent - 1988 - 2 OPTIONS

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

iFlight / HSKRC XL5 XL6 XL7 XL8 XL9 GPS BN-880 VTx Antenna and Crossfire Antenna Mount

Tested on my HSKRC XL Frame (XL9 Arms), which is very close to the iFlight XL7. Standoffs in my case are 5mm (which could differ from the iFlight model), so the holes are tailored to that size. I added a TBS crossfire antenna holder to…

MOD for DeSteiner Model 1887

12g-ammo in two pieces, can be printed in two colors, then glued together. Additional picatinny rail on barrel-grip_back. Several stronger parts.

Lego Compatible (65388.dat) Animal Dog Bulldog

This model is compatible with the lego system.

Ender-3 V3 SE/KE Cable Holder and Lid Handle for Storage Box With Sliding Lid made by @Phamaral_1388575

I added a new design to the existing box as a cable holder. I added a minimalistic handle to make the lid easier to use.

Volador VX5 T700 GPS Mount HGLRC M100 5883 and other

GPS mount for FlyFish Volador VX5 for the original antenna mount, compatible with all GPS units with dimensions of 21x21mm. No screws are required to mount the module. Print settings: Material - TPU Infill - 50% Walls - 3

Lego Compatible (18835.dat) Minifig Hair Mid-Length Straight with Crown

This model is compatible with the lego system.

DeWalt DCF887 holder

A holder for the DeWalt DCF887 impact driver. For mounting below a shelf. Will hold the driver safely even with the heavy 5 AH battery. The reason for the 10 cm wide mounting bracket is to make sure the wide battery doesnt collide with…

Ferrari 488 GT3 Wheel SimRacing for Logitech G27 G29 Thrustmaster T500 T300

Steering wheel based on Ferrari 488 GT3 design GitHub Repository: https://github.com/Alby312/GT3-488-Wheel Wheel of 30cm of diameter, based on real wheel of Ferrari 488 GT3 with 12 push button 2 rotary encoder and 2 magnetic paddle shift.…

Soda cap [PCO 1881] boxes

Tested by using the PLA. No supports required. No caps are included. Drink your soda and keep a cap ;)

Estradiol tablet 2mg 887 | 2 b

This is a detailed model of an Estradiol 2mg tablet. Now you can print your own giant estrogen pills! Other models of this tablet are available online, but I wanted one with realistic beveled edges. Not for medical use. Do not eat.

Wall mount for Bosch battery charger AL 1880 CV

The battery charger Bosch AL 1880 CV takes up a lot of space on the table or shelf. So why not hang it on the wall? With this holder, the attachment to the wall is done quickly. Two parts, one mount and one latch. Print the mount with…

Lego Compatible (88930.dat) Slope Brick Curved 2 x 4 with Underside Studs

This model is compatible with the lego system.

SRT Ferrari 488 GT3 Sim Racing Steering Wheel for Wireless Simucube

ENGLISH : Ferrari 488 GT3 Steering Wheel for Sim Racing. Compatible with Simucube 1 and 2 wireless. Based on this PCB : https://s.click.aliexpress.com/e/_AAYK5Z More informations :…

nerf 1887 shell

"nerf" gun it goes with: https://www.amazon.com/Shotgun-Ejecting-Parent-Child-Outdoor-Goggles/dp/B09F66CSKD/ref=sr_1_6?keywords=nerf+lever+action&qid=1682553720&sr=8-6 I made it with orange polymaker PLA no supports Blue one is the one…

Gridfinity Knipex 7881125 side cutter Seitenschneider

Gridfinity Knipex 7881125 side cutter Seitenschneider 2x4 grids. See all my tools https://www.printables.com/@MatthiasHart_2387670

Felgenkappen, Radnabenemblem 50mm Alfa Romeo 145, 146, 147, 156, 166, Spider, GT, MiTo 60652886

Nabeldecken für viele Serienfelgen der Marke Alfa Romeo mit 50mm Durchmesser. Original Artikelnummer: 60652886 Die Embleme gibt es sehr günstig aus China wie z.B AliExpress oder andere Gedruckt in massiv PETG. PLA ging bei mir nicht, da…

REAR BUMPER BRACKET MERCEDES W211 A2118851314

Best printed standing with high infill. I prefer stronger filaments such as abs or pc. The support is only needed in the part where there is a latch. In the hole for the screw remove the ready support that is in the model, it is easy to…

Manta Ray Face Shield remix for 888Hole punch

I remixed the "Manta Ray Face shield" by Joe Telling to fit the european 888 hole punch standard.

Ender 3/Pro/V2/Voxelab Aquila - Z-Axis Stabilizer using 616mm GT-2 Timing Belt and F688ZZ Flanged Ball Bearing

I haven't done much printing, but I found that neither of my printers care for having the timing belt system going. They were both printing like crap, so for an acid test I took this off both any they started printing great again. So at…

Ontario Knife (ON8838 Rat-1) Scales

Replacement scales for the Ontario Knife pocket knife (Model: ON8838 Rat-1). Update: I added my solidworks file that I used to model this item, along with the tracing that was referenced for the measurements. Print Settings Printer Brand:…

Playmobil - Castle 2x2 Floor 30 07 8810

Some square 2x2 floor tiles to be put between walls. Printed in ASA, but any filament should do just fine. My Settings are: Variable Layer height with max Quality. (or alternatively 0.16mm) 4 Walls, thickness of upper wall 0.8mm (or 4…

Mercedes Benz Hood | A1298880116 | Bonnet Emblem 57mm |

FDM friendly version of the Mercedes hood emblem, optimized for 0.4mm nozzles. Will give even better results when printed using 0.2 or 0.25mm nozzle and 0.1mm layer height In three versions: Fully blank emblem plate and insert in one…

Triumph T3880023 - Steering Stem Nut Socket

Triumph T3880023 - Steering Stem Nut Socket You'll likely need to print this at 100% infill since it's required to transfer up to 40Nm of torque.

Lego Compatible (4588.dat) Brick 1 x 1 Round with Fins

This model is compatible with the lego system.

Lego Compatible (3788.dat) Car Mudguard 2 x 4

This model is compatible with the lego system.

ikea bekant dowel 130884

ikea bekant dowel 130884

Isofix cover for Audi (4G8 887 187)

The previous owner of my Audi A6 C7 (Facelift) had lost a couple of the Isofix covers. I found a model online which works really well. Credit to the original author over at…

Vase 888

A beautiful round flower vase with thick vertical curves that go all around; for decorative purposes to hold artificial flowers, or anything else. It is 170mm tall and 107mm wide. The photo shows the vase printed in vase mode, which…

Lego Compatible (6088.dat) Minifig Helmet with Underwater Antenna and Clips

This model is compatible with the lego system.

Lego Compatible (88704.dat) Minifig Whip Bent

This model is compatible with the lego system.

Meshtastic UHF HT. Heltec V3 Baofeng BF888S.

Parts Needed: - Baofeng BF888S UHF HT - Heltec V3 - M3 x 30mm Allen screws and nuts - Some soldering required

VHS Tape Artifact 88

Artifact 88 — “A lost data relic from the pre-digital age. Contained within: unknown recordings from The Core.”

LEGO Pontiac Fiero GT 1988

LEGO Pontiac Fiero GT 1988

Hakko FX-888D Ultimate Soldering Tray

A tray that can keep all your soldering equipment secured in one area. Designed to hold a Hakko FX-888D Model Soldering Iron and Station. Complete with 12 T-18 size slots for nozzle heads. A solder spool holder with varying size holes to…

Asus AX88U Router Wall Mount

Low profile wall mount for the Asus RT-AX88U. Pegs slide and lock into the keyholes with ease. Should work for anything with mounting holes that are 8 5/8in or 218mm apart (From center to center) Thanks feddas , didn't have to measure a…