50 models
[ IMPORTANT in order for this part to fit, you have to scale it from 100% to 10 % ] This is a spare part for upper basket rear stop, which you can use instead original part, it's cheaper and faster to print, PLA under a dishwasher…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
The official Cisco part for wall-mounting 8800-series IP phones has been getting increasingly scarce and expensive as of late, so I set out to make a 3D-printed alternative for use at work. Additional Materials Needed: - 2x M3x6 machine…
This model is compatible with the lego system.
Triumph T3880023 - Steering Stem Nut Socket You'll likely need to print this at 100% infill since it's required to transfer up to 40Nm of torque.
This model is compatible with the lego system.
The hole in the middle was covered with a 0.2mm layer to prevent supports in the hex socket. After printing use a knife and cut the hole open. Printed out of PETG but a hard TPU lasts probably longer. Print settings: 5 Walls 40% infill…
This is a mounting bracket which fits the yaesu 8800, 8900, 7800, 7900, and probably others. When printed with ABS this is surprisingly strong (3mm walls probably help), but you will likely need longer screws than the ones you might (or…
A quick and quircky plastic handle to replace a brocken mount of the Whirlpool 488000506980 fridge/freezer handle. According to this page , it must fit the following models: 859991054850 850466411702 869991054820 859991054830 859990962630…
3D model, hardware description and arduino code to make your own Altair 8800. Feel like Bill Gates in 1974!!! More info Github: https://github.com/Menyiques/Altair8800 Printable using MMU2 or by filament change.
This is a “minimalistic” wall-mount for the Verizon JetPack 8800L MiFi Hotspot. I may go back and reduce some unnecessary corners and mass to make it truly minimalistic. I designed it using a 3D scan of the device, so it should be a tight…
A gear of my thickness broke a while ago. The sparepart costs more than 40 €, so i decided to remodel it. Works like a charm. Print settings: Print with something sturdy but not brittle (Tough PLA or Nylon) 100 % Infill Standard-Quality…
Altair 8800 Simulator Enclosure - Altairduino If you've ever wanted to relive the glory days of the beginning of the home computer revolution, this project is for you. The Altair 8800 was announced in the January 1975 issue of…
Theses models allows it to replace the original Thecus motherboard agains an standard mATX motherboard and a silent PSU.
Given the original files were irretrievably archived by Autodesk during their Fusion 360 downgrade, this will be the last version. THE V5 FILES ARE CURRENT AND HAVE CORRECTED DIMENSIONS The "Fancy" version has some nice chamfers and…
Repair your broken A6398800985 by glueing this part onto the breakage. It will work with just superglue. But for extra strength, drill 1.5/1.75mm holes through the lashes and stick some filament through the lashes. Apply more superglue or…
Bed Model to use with Simplify3D, PrusaSlicer... Category: 3D Printing
MH-8800G/5 DYNAMIC UHF Microphones holder - Provide wall storage for 2 hand held microphones type MH-8800G/5 DYNAMIC UHF Microphones
Designed to hold lathe tools for the Wen LA8800 lathe stand. No Supports needed STLs have been uploaded in print orientation 4mm mounting holes for nuts and bolts or zip ties (This is how I mount them in the pictures) Tool hole is 28.86mm…
Ersatz für die originale Riemenspannerei mit der originalen simplen Schraube. Hier werden die originalen Lager und die Vierkantmutter wiederverwendet. Das Spannen ist absolut simpel und genauer wie mit dem Original. Bohrschablone…
This fits into the blank space of the skeleton sheet, after your button broke off. Size of the Frame is 24mm x 21,5mm.
Wall mountable holder for Wolfcraft 4688000 (90 degree screwdriver adapter)
Desktop stand for S-8800 model radio. Has relief holes for usb power cable, antenna and external audio jacks.
This is my design to mount a raspberry 3 with camera to my 3D Printer (Velleman K8800). The camera can be oriented by the loc-line. There are two types of loc-line, the normal one and the one with a mount for the camera cable. For better…
Modeled to contour to a Cisco 8800 series handset. I use the smallest size Ranger Band, cut into thirds, to attach it to the phone. Depending on the size of the push-to-talk button, I've included 2 versions of the button insert.
Heizbett für den Velleman Vertex K8800. Ich wollte den Drucker nicht unnötig verändern, darum habe ich das Heizbett unter der originalen Druckplatte untergebracht. Als Heizung dient ein 12V 50W 100x100 mm Heizpad, das über einen…
For some kind of filament spools it is necessary to have a return pulley. You can use 2 M4x16mm countersunk screws for the riser to fix this. I used 2 608zz bearings UPDATE: an improved version better for large spools. It reduces the…
This model is a 1U 10-inch rack mount, designed specifically for the ONU XPON PL8800Z All model CAD files are fully open-source and available for download Check out the GitHub repository to explore the project Variants To accommodate…
Endoscope mount for Vertex Delta K8800 endoscope used = cheap 7mm diameter endoscope (AliExpress) => but diameter has a lot of tolerance, so I added the Fusion file, so you can modify the diameter to your needs... Enjoy! Print Settings…
I do like all the designs of StoniXX for the Vertex Delta K8800 This is not a real remix, but more of an add on... My mosfet heatsink was somewhat bigger, and couldn't fit it in the housing. So I made this, it's an extension of the…
Am Velleman Vertex K8800 ist das Display von oben schlecht abzulesen. Da der Printer bei mir recht tief steht auf einem niedrigen Tisch, gab es da immer Probleme. Daher habe ich die originale LCD Montageeinheit mit einem Pult versehen.…
Motorabdeckungen für den Velleman Delta K8800 Printer. https://www.thingiverse.com/groups/vertex-k8800 Print Settings Printer Brand: Deltaprintr Printer: Deltaprintr Kit Rafts: Yes Supports: Doesn't Matter Resolution: 0.1 Infill: 30%…
Notaus für den Velleman K8800. Der Schalter erzeugt einen Reset in der Steuerung. Der originale Reset Knopf ist im Betrieb nicht zu erreichen, der Netzschalter auf der Rückseite ist ebenso ungünstig gelegen. Wer den K8800 hat, weiß das…
Montage Klammer für den Vertex K8800 zur beliebigen Befestigung von Anbauteilen. z.B Netzteil, Octoprint PI, PI-Kamera, Werkzeughalter, Seitenwänden einer Druckereinhausung ... Zwei Versionen, einmal für Gewindeeinsätze und eine zweite…
Filamentspulenadapter und Wickeltellervergrößerung für Velleman Vertex K8800. Die Wickeltellervergrößerung ist so konstruiert, das diese auf dem originalen Wickelteller spielfrei und leicht klemmend sitzt. Ich habe in die Löcher O-Ringe…
3mf created to print the piece upside down in multicolor printers. Added code to use an arduino to control all leds. Schematics and code here:…
Cable holder for end stop cable at step motor. Designed with FreeCAD. Print Settings Printer: Velleman K8800 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 20% Category: 3D Printer Parts
Der Velleman K8800 ist nicht gerade als Ohrenfreundlich bekannt. Mich hat gerade der Filament Motor immer durch seinen hohen Geräuschpegel gestört, der sich durch die Direktmontage am Rahmen noch verstärkt hat. Nun habe ich den Motor…
Erhöhung für die Spulenhalterung am Vellman K8800. War notwendig, da ich vereinzelt Spulen hatte, die etwas deformiert waren und am Druckergehäuse geschliffen hatten. Ideal in Kombination mit der Filamentführung…
Not yet tested. (Still waiting for the MK3 hotbed ) Remixed from pictures in this post: https://forum.vellemanprojects.eu/t/building-a-heatbed-for-k8800/29826/5 Printed in PETG or erpPET Category: 3D Printer Parts
This is a housing that you can put around your Titanium Innovations M-8800 Battery Charger to then allow you to mount it to a wall. Note that it's a tight fit. Some light sanding may be required though I didn't have to. Category: Tools
Upgrade für mein Projekt Heizbettregelung https://www.thingiverse.com/thing:3430150 Mich hat immer gestört, das der Regler extern auf dem Tisch stand. Nun habe ich das Gehäuse geändert, so das der Regler fest am Drucker montiert ist.…
Gehäuseadapter, um den kleinen lauten 40mm Lüfter gegen einen 60mm Low Noise Noiseblocker XR1 Lüfter zu tauschen. Der Lüfter hat einen höheren Durchsatz bei niedrigerer Lautstärke. Auf dem Bild ist der XR2 zu sehen , verbaut habe ich aber…
My drive gear broke, so I used claude to generate the gear pitch then added the center and the slot. This was generated with AI, so use it if you like. I confirmed the measurements are exact to the existing drive gear that I had in my…
I lost these plugs almost immediately, so I created a 3D-printable model. (TS9 type connectors) Print this using a soft material, such as TPU.
A replacement part for Polaris part R0838800 which is a plastic screw to hold the wheel on the P40 pool cleaner.
The holes and shape of the card are to scale but the heatsink is not perfect. I needed this for a project, i have not printed it.
This is a mounting holder for the MiFi 8800L router, allowing you to hang it anywhere—on a bed, a window, a tree, or a wire. I printed this using PETG plastic.
Given the original files were irretrievably archived by Autodesk during their Fusion 360 downgrade, this will be the last version. THE V5 FILES ARE CURRENT AND HAVE CORRECTED DIMENSIONS The "Fancy" version has some nice chamfers and…
MH-8800G/5 DYNAMIC UHF Microphones holder - Provide wall storage for 2 hand held microphones type MH-8800G/5 DYNAMIC UHF Microphones
