Counting matching models…
esp-32 wroom (38pin) case, with click backside. size inside case 55.34mm x 28.1mm size outside case 60.4mm x 31.2mm print description: Filament : PLA Color Changing Brown/Green Nozzle : 0.4 Layer : 0.2 Infill : 20% If you like it. let me…
This is a two-piece enclosure designed to securely house an ESP32 Dev Board and mount it to a wall. The enclosure fully encloses the ESP32 while allowing access to the USB Port. No support material is required for printing. The design…
This is a cable comb for braided PC cables. I wanted one for my graphics card and couldn't find one that was wide enough. My first design is included as well, but it is to tight for sleeved cables. Though it is perfect for regular ones ;)…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
A Wrist/ Arm mount which is bended so it fits my arm ( when mesured with calipers 68mm in diameter. ) The Idea is from MrLawr3nce on Thangs:…
case for esp32-38pin with 2mm holes. features: enough space for dupont connections outbound cable lock slots for 2 2.54mm pin rows(vcc and gnd breakout, needs hot-glueing) snap lid hole for pressing “boot” button with a needle (i didnt…
Me descargué un modelo y al imprimirlo vi que era para 30pin y no encajaba. Inspirándome en el modelo que descargué diseñé el mío desde scratch. No usé el modelo original en absoluto más que para hacerlo siguiendo el mismo estilo, como…
A small cover to hide the ugly but very useful 8pin 180 degree PCIE connectors . Just make sure you get them in the correct pin count and orientation. This cover is designed specifically for the 2020 RTX Strix cards from Asus, and have…
Connector housing, Dupont 8Pin 12mm Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
This is n-th version, holds well, board "click’s" into position. I'm also using it as the part of final case fitting.
14mm Dupont version Find out everything you need to know about the connector on my blog: https://nerd-corner.com/dupont-connector-v1-1/ or https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
This ESP32 Mount can be mounted direcly on the LucidVR glove itself. This is only usefull if you don´t use the 6th mounting place on the glove which is intendet for tracker. I realized that after I finished designing and Printing. There…
Cover For Single Lever 48pin Aries ZIF Socket Xeltek Beeprog Dataman and Others Due to the Various Sizes on Aries Sockets Scaling may be Needed not a lot .5% + or - I average 20 Sockets took the middle measurments and went with that.
Box for ESP32WROOM 38pin + PAJ7620 with car ventholder. Корпус для esp32 с датчиком распознования движения PAJ7620
