Counting matching models…
As I mentioned in the first version , as much as I like digital, there comes a time when you have to go back to analog, so all my notes are in the same notebooks, I like the Leuchtturm1917 with dots instead of lines or grids, comfortable…
As much as I like digital, there is a time when you have to go back to analog, therefore, all my notes are in the same notebooks, I like the Leuchtturm1917 with points instead of lines or grids, comfortable to write and good size. The…
Craftsman band saw 113.244510 part number 69174 replacement. Modeled from original part in F360, STEP file provided, everything under non commercial, share alike license. This part is no longer made by the manufacturer and is impossible…
Printed this replacement for a friend. He drivers VW Passat B7 and it fits like a glove. Original has some kind of rubber gasket (it could be hand cut or maybe channel for the gasket could be filled with silicone).
Bmw E30 (probably also E28 and E23) rear sun shade hook, "late" version. OEM-number: 51461917381. Made with the dimensions of original part, but the fitment not tested yet. So the model still in WIP-status. The sun shade has 2 hooks,…
The clips of the red side marking lights in all four doors of P80 series Volvos (V70I, S70) tend to break when you try to remove them to change the light bulbs. Sometimes they even break when slamming the door too much. While the lights…
Photogrammetry scan of the sculpture "Man And Woman With Small Child Between Them" by Norwegian sculptor Gustav Vigeland exhibited in Frogner Park, Oslo, Norway. Prints perfectly with organic supports.
I managed to damage my holder so this is a replacement piece.
You should print it in TPU with 90 or 95 A. If you want to have an drift tire then you can print it in Pla or Petg.
This is headlight dust cover cap remixed to fit LED bulbs Works as replacement for part numbers: 3AA941607, 90009172 Tested on WV Passat B7 but should work other models and brands with same part numbers.
Limbered version of Windham Graves ' excellent M1918 155mm Howitzer (known as the 155C mle 1917 in French service) in both horse-draw and motorised versions. The gun barrel was separated from the cradle and moved to its travel position.…
WWI-inspired American M1917 Light Tank. Designed as a toy. You may need to resize this model to fit your needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it…
Display Stand for LEGO Nissan Skyline (Fast & Furious) A custom display base made specifically for the LEGO Nissan Skyline (Fast & Furious) . The stand is designed to present the car at a nice angle with a clean “showroom / movie-poster”…
Materiál: PETG - Carmine Red Tryska: 0.4 Tisk: 0.20mm QUALITY @MK3S Výplň: 15% Bez podpěr 100% rychlost 48min. Víko má otvory (zámky) pro zacvaknutí do krabičky bez použití lepidla nebo šroubů. LED diody nejsou na kameře standartně a jsou…
This is a guy support for the MFJ 1916/1917 extendible fiberglass mast guy, and mast topper suitable to suspend wire antennas at a little more 10m in height. I designed it to be for deployment in the field for amateur radio use,…
I made the model based on the dimensions of the surviving part from my car, with as much accuracy as I could
Cossack of the 1st Chitinsky Regiment in parade uniform, 1909–1917
This model is compatible with the lego system.
For those wanting to tame the RLAARLO 917 for on-road fun, these inserts provide much needed stability in cornering and acceleration for the rear of the car. They are a tight fit, and once pressed in place, use an 1/8 drill bit to size…
So I got the idea from Johns Relay holder used for ZD-915 upgrade from https://circuit-board.de/forum/index.php/Thread/26421-Etwas-mehr-aus-einer-ZD-915-Entl%C3%B6tstation-rausholen but i did not like the mount location much and i wanted…
Hey Guys, I picked up a Model 1917 WWI Rifle and needed a tool to get the Firing pin out. So I designed this based off of the tool in the user manual. Category: Sport & Outdoors
This is a kit for converting the Chinese vegetable dehydrator KITFORT-1917 (also known as Wartmann WM-2006 DH and may be smth else) into a filament dryer. It dries up to 90 degrees, heats up quickly, and can print with two (optimal) or…
Basic bore guide for the M1917 Enfield
Hier ein sonoff tastamo Halter zur Montage in einer Obi t60 Abzweigdose
Klappe für SIKU 1917 Turnierpferde Anhänger Pferdeanhänger PLA oder PETG kein Support
Print time: 5h 35min Infill: 15% Wall thickness: 2mm Material used: 97g
Description Keep your desk organized in style with this minimalist hexagonal pen holder , designed specifically for Leuchtturm1917 pens – or any pen with a hexagonal body smaller than 8.90 mm in width. The holder fits up to 4 pens , each…
Here is a replacment swing arm insert for the Rlaarlo ak-917. The original kept on breaking so i designed this one and printed out of tpu and it hasnt broke once. Recommend printing in tpu with supports.
Diese Aufnahme ist für die Reinigung von DeLaval Melkrobotern. Bislang habe ich es aus PETG mit 100 % Füllung gemacht.
This is kind of a niche item :) In the instructions, Powerflex explicitly mention : “Ensure that suitable adapters or pressing tools are used and that any force is applied to the bush face and not on the bonded metal bracket.” →…
Hideg indító kábel diselhez és kézi karburátorhoz. Pteg és TPU95A és bármien vezetákes kűbellel befűzhető, ideiglenes vagy helyetesítő pótalkatrész. 161711501/C https://www.heritagepartscentre.com/eu/161711501c-choke-cold-start-cable.html…
I designed and printed this battery riser so the AK-917 can fit taller batteries, my Ovonic 3s 5200 was a bit too big to fit. It works together with the original rear battery clamp arm and a redesigned front part. The riser just lifts the…
Replacement handle for the telescoping release. Tested in PETG, 60% infill, 0.25 Draft with 0.4mm Nozzle. Prints with supports. When installing, do not lock the two parts together. Insert the pegs into each rail first. Once in, then lock…
West 916 917 Display Stand
Description Keep your desk organized in style with this minimalist hexagonal pen holder , designed specifically for Leuchtturm1917 pens – or any pen with a hexagonal body smaller than 8.90 mm in width. The holder fits up to 4 pens , each…
Display Stand for LEGO Nissan Skyline (Fast & Furious) A custom display base made specifically for the LEGO Nissan Skyline (Fast & Furious) . The stand is designed to present the car at a nice angle with a clean “showroom / movie-poster”…
This model is compatible with the lego system.
Intended to be used outside with limited exposure to weather, e.g. under a roof. I printed it using PETG and applied an UV resistant transparent varnish to it.
This model is compatible with the lego system.
A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. It is 110mm tall and 79mm for the x and y axis. The photo shows the vase printed in vase/spiralize mode with 1 wall and 3 bottom layers. The stl file is…
This project provides a clean, secure way to wall-mount plastic tool trays. Instead of a generic shelf, these holders are designed to "hug" the tray, keeping your tools accessible while saving desk space. The primary focus of this model…
Shimano ST-R9170 dummy "hat"/control module, for those who don't need Di2 module in their levers and want to shave off some grams. The fit is "good enough".
This is a baseplate for the Zoraki 917 blankgun. Use this in case you lost the original one or because it looks better.
Das habe ich erstellt weil es keine Vorlage gab. :-) dies ist eine Wandhalterung für die Zoraki 917 +3 Magazine.
Что понадобится: Сушилка для овощей Kitfort KT-1917 или любая другая (все рассчитано на толщину стенок 0.5 мм) 5х винтов М4*15 2х гайки М4 с уплотнителем 1х шпилька М8 2х гайки М8 с уплотнителем 2 подшипника 22мм 5 вплавляемых гаек…
enlarged the battery compartment in the base to be 87mm long (approx.)
Parts that can not be bought separately, would have to replace the whole mechanism. These parts clip on a metal ball and act as guides for the mechanism as far as i understand it :) Printed with supports on the flat side as you can see…
Stihl ersatzhülse - 41407917207 Passend für Gerät:FR85T, FR130T, FR131T, FR410C, FR460TC, FS55C, FS55R, FS55RC, FS55T,
T ford T racer yaer 1917 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA
