Counting matching models…
Bohrschablone für Unterputzdosen und Hohlwanddosen Bohrschablone zum markieren von Bohrlöchern für 68mm Unterputzdosen und Hohlwanddosen (Steckdosen, Schalterdosen) mit Zentrierung in 68mm Bohrungen zum genauen Platzieren.. Die…
Print approx. €4.14–€5.06 excl. taxPreliminary estimate for one variant
These are replacement scales for 91mm Victorinox Swiss Army Knives. You can edit the .STEP files to add your own custom text or logo. Adding a filament swap at the first layer of the logo/text really makes it stand out. The holes are…
NEW Added three slot version to support a mini 3d printed toothpick. Can use the original tooth pick slot for a fire steel. For best results you'll need a 0.2mm nozzle. Included a couple other versions of the opposite side in the 3mf.
Should press fit with moderate pressure, tougher fits can tap gently with a mallet. Printed on Flashforge Finder with PLA.
MAGNETS - Uses five 6x2 magnets (measured size is 5.94x1.6) inserted in the bottom. Place adjacent magnets in same direction. While not required to keep the bits in, it stops them moving around. The groove under the bits is ultimately…
I tried several 3d printed whistles and this one was the loudest, and so I've integrated it into a scale - much like the discontinued victorinox whistle scale. Also included opposite side plus scales with and without victorinox logo, per…
I thought this would be a a simple part to design… boy was I wrong. The reamer on the 91mm Swiss Army Knife (same reamer on the Ranger Grip series) has a curved edge, it begins at a 96° angle from the knife body and is bulged for the nail…
Customizable scales for a Victorinox knife with space for toothpick/tweezers
These are 91mm Spoked rim and wheel tires design for RC Planes. The video provided shows how these exact rims were made using Tinkercad. Follow along and learn to make your own custom parts for RC planes. Black TPU:…
These are scales for a swiss army knife (Victorinox, 90mm). The scales are available in smooth and ribbed. The scales contain slots for the toothpick and the tweezers. Layer height: 0,15mm Infill: 100% The scales shown are printed in PLA…
Simply screw onto corkscrew to attach.
This design clips directly in place of original scales. Rivets are used as part of the design.
Couldnt find good sources so this one uses the same Filters as the popular BentoBox Air filter. Still pretty loud so i designed another version with a cover to direct the air around some corners. Printed upside down with supports.…
Introduction This is a 6mm (1/4 inch) hex-bit driver I made for my 91mm Victorinox SAK. It will only work with 91mm Victorinox knives, but I also made one for 111mm knives. I tried to make it as durable and universal as possible, and it…
Couldnt find good sources so this one uses the same Filters as the popular BentoBox Air filter. This one redirects the air wich will probably affect performance of the exhaust fan a bit but probably way lett than the filters already do.…
A disassembly jig to easily drill out the rivets on a flat surface. The cutout is for the corkscrew/phillips-screwdriver. Can be used on both sides, but depending on your nozzle and settings you might have to change the diameters on the…
These are replacement scales for 91mm Victorinox Swiss Army Knives. The models are designed to let you use three different filament colors to create the pattern. The holes are designed to be interference fit with the knife's rivets, so…
I recommend to print horizontally with a brim.
c' est un canon externe compatible accessoir picatini inferieur type glock
These are replacement scales for 91mm Victorinox Swiss Army Knives. The models are designed to let you use three different filament colors to create the pattern. The holes are designed to be interference fit with the knife's rivets, so…
This model should be printed with the outside of the scales on the printbed. This is the way it is already oriented. The model named “Scale” doesn't need any supports and can just be printed as is. The model named “ScaleWithCutout” needs…
These are replacement scales for 91mm Victorinox Swiss Army Knives. The models are designed to let you use three different filament colors to create the pattern. The holes are designed to be interference fit with the knife's rivets, so…
Victorinox/Swiss Army Knife Holder to hold 3 or 5 knives. I expanded on MFM15's design to allow each holder to hold 3 or 5 91mm swiss army knives depending on your preference. It also works with Alox scaled knives but is a bit loose at…
A version of the 91mm Plus scales for those that remove the corkscrew or phillips driver from their Swiss Army knife. This scale allows customs modifications to your knife while still maintaining its cosmetic looks. Unfortunately you will…
This should be printed with 100 percent infill, completely solid, or nearly so. It is 91mm in diameter and 12.7mm thick, with a .4" wide slot for the pinch weld on many cars.
Storage box 170mm x 130mm x 91mm Storage box for bathroom drawer.
keeps your dynavap and fave flower with you anywhere you go, designed for uptyo 91mm of device and takes a M3 screw with a nut on top to hold it in place for debowling action!, i then glued it in place to keep it sound. Magnets needed are…
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) Based on https://www.thingiverse.com/thing:3585059 and remixed in Tinkercad ( https://www.tinkercad.com/things/lfhW2cqGIi8 ). Scaled original to 87.7%…
91mm EMBOSSED CONTAINER TRIPLE THREADS
Victorinox Knife Scales top & bottom
I got some liquid bottles that are 28mm in diameter and 91mm in height, I wanted to store them together and a way, I put this box together. I made two versions of it 4x Liquid Bottle 16x Liquid Bottle (shown in the pictures)
Om dat de afmetingen van het verloop niet te koop waren in de winkel heb ik het zelf afgedrukt. Because the dimensions of the gradient were not for sale in the store, I printed it myself. Groeten Ludo
Print with high infill and/or in ABS or ASA for outdoor use
Holder for sealable bags
The model has slots for 4 * 6mm diameter x 3mm depth cylindrical magnets. Use glue to secure the magnets into place. The internal dimensions are designed to fit 91mm x 66mm card sleeves, with the internal dimensions of the box being 92mm…
Victorinox/Swiss Army Knife Holder to hold 3 or 5 knives. I expanded on MFM15's design to allow each holder to hold 3 or 5 91mm swiss army knives depending on your preference. It also works with Alox scaled knives but is a bit loose at…
Deutsch: Update: Ich habe eine neue Version mit vollständigem Victorinox Schriftzug hinzugefügt Bereits seit längerem war ich auf der Suche nach 3D-druckbaren Plus-Schalen (die mit Nadel und Kugelschreiber) für mein Victorinox Cybertool.…
