Counting matching models…
Another awesome model found at the 3D Warehouse https://3dwarehouse.sketchup.com/model.html?id=62eda45907bcb75c320fa6e2cd857828 I've extracted the files as best I could, but there are some errors. If you can repair the mesh further please…
Dodge Charger 1969, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Print another model with magnets!
1969 Camaro Easy to print . Of course you can scale it the size you want. Easy to print for up to 90cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Dodge Charger 1969. Assembly required. Can be printed separately Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
1969 Camaro, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
This model took a lot of time and patience to complete every single piece and was meticulously designed to fit together properly. Depending on the type of filament and 3D printer you use, some sizes may need slight adjustments for the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is my best recreation of a Chevrolet Camaro. I suggest printing upright with normal supports. -also, could also be used as a finger skateboard :) Have fun printing!
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A sweet tow truck to add to your collection. Procedure is fairly simple, almost the same as my other models. With this one I gave the option to print the deck separately. I prefer to paint over white plastic, but I wanted a black deck, so…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I have created a simple replacement housing for the Liebherr activated charcoal filters. The original housing included a filter fleece, which I wanted to leave out of my design and placed the struts closer together. Simply print in PETG…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
After breaking a lot of stock chopsticks, here is a reinforced edition. It is also more precise and limits the play at the wheels. Choose the right STL version for your balls : 3.4 - 3.5mm are for stock plastic hub carriers, and 3.5 -…
I designed this steering knuckle for my k969 because mine broke
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Magnet holder for new Skyline body
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a larger bumper than the stock one to protect your front drive train while driving your car fast. It can prevent breaking the turnbuckles, A-arms or steering hub carriers in case of front impact. This is compatible with WLtoys…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I printed both parts in PLA. For smooth drifting you will have to sand down any imperfections, but it isn't necessary.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Parts for wltoys- rc cars
The Wild, Wild West - Artemus Gordon (Ross Martin) - 1965-1969 3D printable model.
Poussoir de remplacement pour robot KitchenAid.
Space Transport Vehicles - Apollo 13 Saturn V rocket - 1969 3D printable model.
chevrolet corvette 1969
WLtoys K989 or K969 (brushless) motor mount, uses original hardware and fits without modifying the chassis
This is a set of files for improving the steering angle of the Wltoys a979 (also for a959 and a969). This model's steering system articulation is way too low and the wheels may only turn 10-15 degrees most which causes the turning radius…
Replacement servo horn for the 284131 (and k9x9) with smaller holes to allow moving to outer hole and increasing steering angle. Holes are 1mm which is very tight but works. Modify / drill the hole out a little if you want an easier time…
Leonardo DiCaprio porshe 911 1969
The Brady Bunch - Marcia Brady - 1969-1974
This model is compatible with the lego system.
Riptide - Mercedes Pagoda (type W113) - 1969 3D printable model.
This model is compatible with the lego system.
Simply print on FDM or resin printer and use double-sided tape to fasten it to the body of the station.
Hammer Film Scenes - Frankenstein Must Be Destroyed - 1969 3D printable model.
Custom rims (wheels) for Wltoys K969, K989 or 284131. Can be printed with 2 colors without a special multicolor printer. Just add a stop a the right height in the slicer and change the filament during the print. The holes are very tight,…
the stock rear part is broken easily, so I found a model and fixed some geometry issue and enforced it. enjoy! here is a small video on how it drives :) and one more updated: just broke the same part on the other model 284131 - and it…
WLToys - Work/Display stand Introducing the ultimate display and work stand for your 1/28 WLToys RC car! Designed for both hardcore enthusiasts and casual tinkerers, this stand is like a throne for your miniature speed demon. This stand…
Unleash the spirit of American muscle with this stunning 3D printable model of the 1969 Ford Mustang Mach 1 GT, presented dramatically beneath a sleek black cloth. This model is perfect for collectors, classic car enthusiasts, and for…
Wltoys A959 series have 7mm hex which is not very common. There are various wheel alternatives with 12mm hex. This part enables the use of 12mm hex wheels with A959 series.
The Brady Bunch - Cindy Brady - 1969-1974
lego 6231 4865 23969 93095 23950 30413 91501 4864 14718 2362
The Brady Bunch - Carol Brady - 1969-1974
The Brady Bunch - Jan Brady - 1969-1974
Here's some wheels and tires for the WLtoys 284131. I printed the rims from PLA and the tires from 95A TPU. They get significantly less grip than the stock rubber tires which is fun for indoor drifting. I included some larger rims and…
AMC Rambler Station Wagon 1969
Celebrate the golden age of American muscle with this 3D printable model of the 1969 Chevrolet Corvette C3 Convertible. Presented under a draped cloth, this model is perfect for creating a dramatic reveal for presentations or showcasing…
One of the parts required for wltoys RWD conversion. Enjoy and left a comment if any improvements are needed. Also don't forget to visit my channel to get the latest updates:…
Multi-Part Print Print first_11_gears.gcode Print Remaining_parts_to_print_in_slicer.gcode Video of it spinning TLDR Feel free to remix, resell, gift, your call. All I ask for in exchange for my work is a like, follow, comment, or DM…
The Brady Bunch - Greg Brady - 1969-1974
Space Transport Vehicles - Soviet Vostok Spacecraft - 1969 3D printable model.
The Brady Bunch - Alice - 1969-1974
this is an improvement of the model - https://cults3d.com/:3310458 video on how it looks: https://youtube.com/shorts/UEM4XTzH6cw?feature=share what is changed: 1) knuckle improved a lot - more durable and has it's own way to fix on the…
Riptide - Moss Andrews (Ty Hardin) - 1969 3D printable model.
The Brady Bunch - Mike Brady - 1969-1974
Dust collection does wonders. When i used circular saw for the first time i ended up all white from pieces of wood that i was cutting. Thats when I became dead set on connecting my good old Dyson DC19 vacuum cleaner to cutting tool. And…
The Brady Bunch - Bobby Brady - 1969-1974
I was getting frustrated with how easily the Pro'sKit SS-969 heat gun would fall out when moving the whole thing. This replacement part holds the heat gun more securely. (You can still easily take it out when you actually want.) Print…
The Brady Bunch - 1969 3D printable model.
The Brady Bunch - Peter Brady - 1969-1974
Marcus Welby, M.D. - Dr. Steve Kiley - 1969-1976
Dodge Charger Daytona 1969 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Marcus Welby M.D. - Dr. Marcus Welby - 1969-1976
Marcus Welby, M.D. - Consuelo Lopez - 1969-1976
It was designed around a 1969 but probably fits more years.
K989, 969 or Mini-Z Touring wheel
The hook that you use to keep the scooter folded can also be used to carry things, but bags on it are relatively unsafe. Therefore I looked for an alternative. Unfortunately the designs for the M365 do not fit on the Iconbit Scooter, so I…
Scale Model of the 69 Dodge Charger.
Porsche 911 901 Coupe 1964-1969 Racing
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
Marcus Welby M.D. - Myra Sherwood - 1969-1976
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 270.9x270.9mm in size Instructions in txt file
Project Expired patents - "Reviving Forgotten Inventions" I search Google Patents for intriguing expired patents and bring them back to life—because I believe they’re either interesting, funny, or genuinely useful. Once I find a design…
Turn signal shell for Cadillac Eldorado 1969/1970 Printing with transparent filament (not crystal clear but diffuse; e.g. PETG). The part may also work on other Cadillac models. Try it out. Blinkerschale für Cadillac Eldorado Drucken mit…
Remake of very old board game from 1969. It evolves kids imagination when they try to create own pictures with colored hexagons. In original game there were 6 colors, now you can print any color you want :-) The main board is set up of 4…
A9x9-20 Servo Arm spare part for Wltoys Print Settings Printer: forkLIFT MK1 Rafts: No Supports: No Resolution: 0.3 Infill: 100% Filament: 3DFila PETG Golden Notes: Printed with ABS outlasted the original part and should be even better…
Seat Mount, Indian, Part 5139695. Replaces https://www.indianmotorcycle.com/en-us/shop-parts/5139/5139695/
The picture shows the colored PLA for test, the original part on top and the ASA connector in black in the middle Then a pictures with the support and brim on the model then last picture are once cleaned. No real position found to print,…
