Counting matching models…
Everyone loves bolt-action pens so why not have a pen that looks like a bolt action rifle? What started as a joke turned out to be one of my favorite 3D Printing projects to date. be sure to check out everyones awesome makes! BOM printed…
Model je určen pro zkušené modeláře. Model je stejné koncepce, jako zde mnou zveřejněná dakarská Tatra z roku 1990. Pro tu jsem ale sepsal podrobný návod, doporučuji přečíst a nastudovat! U Tatry 6x6 je větší změnou pouze poháněná přední…
Check the difference section at the bottom for feature list! I really liked the original model. Thanks FreddyZ! I started just wanting to make it easier to print, but feature creep got to me. But the result is good, and it was a good…
Bust of Wonder Woman - Gal Gadot inspired by the second film I hope you like it I also plan to make her complete sculpture Print instructions I recommend the support under her chin and her back
Mini version of the 1989 Batmobile from the Tim Burton movie With spinning wheels Support me on Patreon: Print instructions The parts should be in the best orientation already, but just in case I have included an orientation picture in…
I love the Open RC designed by Daniel Noree but I didnt just want the same car everyone else had. So I decided to design my own. And what car is more iconic than the 1989 Batmobile. Unfortunately when I deicided I wanted to design my own…
Updated V2 Humvee added. I've added more details, strengthened the axles and changed the wheels. I also made some repairs to both of the stl files. Since the axles are thicker, the suspension on V2 doesn't flex as much as the original…
****Find all of my exclusive content on my Thangs.com profile **** Channel your inner vigilante with our 1989 Batmobile kit! The kit is roughly 9 inches (23cm) long and 4 inches (10 cm) wide. Shop the filament we used in this model on our…
31. Dec. 2023 V1.3: Simplified the hand model to ease printing Auto 9 for “Universal grip hand” added 30. Dec. 2023 V1.2: New Helmet without visor 29. Dec. 2023: Improved the hand for easier printing Based on DUMMY 13 Beta - Oct. 2023…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
This model is compatible with the lego system.
This model is compatible with the lego system.
Also check this 2019 Godzilla: https://cults3d.com/en/3d-model/art/godzilla-figurine This is a 3D scan of a Godzilla figurine (1989/based on Toho Pictures’ Godzilla vs. Biollante) made with an Artec Space Spider by Laser Design. It had…
Model of L298N DC Motor Drive Controller Board Dual H Bridge
The de Havilland Mosquito, "Mozzie", "The Wooden Wonder", was a British second world war multi-role aircraft, noted for its almost entirely wooden structure, speed, and adaptability. Conceived as a fast attack bomber, it also took the…
6/1/25: I'm adding a version with no interior (DodgeRamFull) which should be safer for kids. It prints slightly faster as there is less perimeter. The NewDodge version is nicer but when pressing on the cabin (or falling on the floor) it…
UPDATE: A maker asked if there were mounting brackets. I was just in the process of finishing up. So, here they are. A wall mounting bracket system and table display system - uploaded to the thing files. Your feedback really helps. Thank…
As you can see in the pictures, this is a two part design. You will need to print the mounting clip and the actual cupholder. The clip is mounted in the passenger footwell by removing the forward screw on the center console near where the…
In my journey of learning Fusion 360, I took on this project as a test of my skills in design for the ease of printing, assembly and enjoyment of a quick shelf or desk top decoration or toy. The files are indexed in accordance to…
Printable 3D model. Controller holder for Playstation, Pokemon Krabby design. STL file.
Print it with a 0.25 nozzle an layer height 0.1 mm. Update 13.7.2022: Added the STEP-File.
This model is compatible with the lego system.
This remix takes the original model, cleans up its stlness, removes a small part of the back, adds a kickstand and most importantly - the wheels now rotate. You will need: black filament grey filament colour of your choice filament 2x…
LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY! THE 1988 MINI RACER is a mini version of our older 1988 racecar. SIZE / WEIGHT: Total assembly: Roughly 70 x 45 mm Filament: We used roughly 10 g of filament using 5% infill.…
Maqueta del mitico McLaren Honda MP4-4 de 1988 con el que Ayrton Senna ganó su primer mundial de Formula 1.
A small, easy-to-print bracket to help reinforce cracked dashboards in 95-98 Chevrolet trucks
The Door Handle Door Lock Rod Clip on my 1998 Honda Accord, this clip does the job as a replacement part. Tested on the front doors only so far, right and left doors need a mirror version but I've found the non-mirrored version also…
Update: I originally posted this model on Thingiverse a while ago, and had updated and added mods for it there but not here. I will eventually move them over to this site, but for now if you want the most current version you can still…
Modelo base sin cortes. Si por algun motivo los neumaticos no se imprimen correctamente he subido un archivo independiente para reemplazarlos. Trabajo en un mejor version tipo Kit card
A stand for the Lego Millennium Falcon, remixed from https://www.thingiverse.com/thing:4790242 to fit on a Prusa i3 M3s+ buildplate. Basically I removed 1mm from both sides of the base, which doesn't really effect anything. If you are…
Head skin piece of LUCKY 13 and MINI 13 in Mac (1984). Files: skin_head_mac - Mac machine without “hello.”, printed with no support or support enforce at the back handle part. skin_head_mac_hello - Mac machine with “hello.”, found that it…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I only have two stamped sheet metal stripper clips for my 98k and I wanted a few more (without breaking the bank), so I did some tests… this is the 8th iteration so far and it works reasonably well. I closed off one end to stop the rounds…
Batman's signature weapon, the Batarang. This is based on Tim Burton's 1989 folding Batarang from the movie. This was my first time modeling with surfaces in Fusion360, it was a challenge, but worth it. Getting the lines to flow like the…
Here's a dodge ram grill emblem. I've included files to print it in two pieces or one piece. I printed the base in black and the logo in red to match my truck. There's a slight curve, so supports are required touching the build plate. I…
Remix of FreddyZ's awesome Kar98k bolt action ballpoint pen The original design is done very well and the parts fit together very well. Also an excellent idea! The reason for this remix is mainly for strength. The parts are printed laying…
Treppe für z.b. Playmobil Puppenhaus 70985 Staircase fits for e.g. Playmobil Take Along Dollhouse 70985 Multicolor mit single Noozle - Farben wechsel auf 2,5mm einfügen -→ dann hat der Handlauf eine andere Farbe als die Stiege. → 3mf -…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Protective, low-profile snap-fit case for the L298N Dual H-Bridge Motor Driver Controller Board . Both the top and base have port and pin header cutouts with an exposed heat sink. The base comes with dual side mounts and a central bottom…
This model is compatible with the lego system.
First released in 2016! OCT 2026 UPDATE My sincere apologies to anyone who has downloaded these files since I posted them here in Jan 2026. I originally included an ARCHIVE.zip of old parts for those who might need them. I did not realize…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I took the original Christmas Tree (Thing 1913982) and used a cone shape in Tinkercad to create a hole in it. It was printed in a Exelvan transparent filament using Vase Mode to create a clearer looking tree, and also a Yellow Gold from…
From the original upload: Tron recognizer from 1982 original to keep my previous lightcycle model company. This is a two colour Recognizer split into base and trim to allow for any colour combination. Enjoy
This model is compatible with the lego system.
The Pontiac Fiero Mid-Engine Two Seat Coupe from 1987 was different from previous years due to the “Aeronose” front and rear. This particular body style was never offered from Plastic Model manufacturers. Since I own one of these cars I…
I purchased a used 997.1 this year and found the sound quality severely lacking after upgrading the old aftermarket head unit. Turns out the factory amp (ASK) had failed along with the stock woofers in the front doors. The factory woofers…
This model is compatible with the lego system.
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
986 GT3 Center Console Delete The split file is to fit on a Prusa Mk3s Recommend using PETG Must remove orange tabs on the bracket to mount Left enough room to upholster part Fit as one part on Prusa XL. Used PETG with organic supports.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
L298N Case with Zip-Tie closure and Screw holes for placement Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Generic PLA Wood Category: Electronics
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a reinforced replacement part. I printed it for my father's washer six months ago and it is still in use without problems For model: K 2.03 / T-50 and others. KARCHER Water Inlet Elbow (discontinued). Part number: 5.063-984.
This model is compatible with the lego system.
http://www.modellbau-wiki.de/wiki/Behelfspersonenwagen A MDyg 986 in gauge 1 (1:32) will be ~700 mm long. Luckily the Deutsche Bundesbahn MDyg986 "Behelfgepackwagen" is very symmetrical. I "only" needed to design a quarter of this express…
3d printed racing semi truck body for Mini-z 102mm and 98mm wheelbase I haven't tested the 98mm version with the stock mr03 98mm pod!!! This remix works with the stock pod:…
I bring you the most faithful version of the Batman logo from the 1989 movie starring Michael Keaton. It's the logo that appears as the Bat-signal and also on the movie poster. It's practically a perfect copy. I also added two holes of…
zv ⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on…
So I was looking for a case for an AZ-Delivery CP2102 USB to TTL Converter (https://www.amazon.de/gp/product/B07N2YLH26/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1) and found this model on Thingiverse:…
EDIT/UPDATE: NEW VARIANT! Print the NEW V2 edition! its 2 diffrent part and the end need to assembly. (See on the new pictures) Now is not easy to brake the top hook! You can print now the V2 from PETG/ABS/ASA/HT-PLA Mounting for folding…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
Replacement pulls to release the rear seatbacks.
Wanted to use a 4" Dayton Audio Full range speaker that i was familiar with. sounds great in the car. can use M4 screws directly into the plastic or use the version with M8 thread adapter version to increase mounting strength. Update…
This 3D printed RC car shell meticulously replicates the iconic Honda NSX '98, offering versatility for printing with both FDM and resin technologies. It is designed to cater to the preferences of RC car enthusiasts who value precision…
⚫ Imperial Dalek 1988 ⚫ I decided to update this model and redo it from the ground up. I wanted it to be more accurate and colorful and completely without supports. I think it turned out beautifully! More Daleks updates coming every…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Nike Air Jordan ORIGINAL COLOR 1984 Blu
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
1989 (Taylor's Version) Lithophane made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
This model is compatible with the lego system.
3D model of the Porsche Boxster 986 and probably 911 996 frunk trim cover fastener. Porsche part # 999 590 036 40. Most of mine were broken or missing, so I remodeled them in CAD and printed my own rather than giving more money to the…
This model is compatible with the lego system.
This model is compatible with the lego system.
Either: 1) Print the handle alone, should be a drop in replacement A 2 layer raft is quite necessary I fear. With a print this small it's not a concern though. Or you could slice a bit off to have a flat surface to rest on, at the cost of…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Das Modell habe ich mit Fusion 360 erstellt, mit 0,10 mm Detail und Stützen “gesliced” und mit 100% Infill in PLA ausgedruckt.
This model is compatible with the lego system.
This model is compatible with the lego system.
![Doctor Who - Imperial Dalek [1988]](https://media.printables.com/media/prints/91571/images/7871487_3222b998-93ee-4a4f-a810-50b3e5d2f2cd_18dda337-2035-4968-b9b4-9c14df6878b8/gg2.png)
