Counting matching models…
So the problem you run into with 1990s cars that next to no one wants is, well, just that. Parts are near impossible to find at times due to demand not existing. Tried to find replacement pieces for the shifter on my 1990 Geo Prizm hatch…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
Mini version of the 1989 Batmobile from the Tim Burton movie With spinning wheels Support me on Patreon: Print instructions The parts should be in the best orientation already, but just in case I have included an orientation picture in…
I love the Open RC designed by Daniel Noree but I didnt just want the same car everyone else had. So I decided to design my own. And what car is more iconic than the 1989 Batmobile. Unfortunately when I deicided I wanted to design my own…
****Find all of my exclusive content on my Thangs.com profile **** Channel your inner vigilante with our 1989 Batmobile kit! The kit is roughly 9 inches (23cm) long and 4 inches (10 cm) wide. Shop the filament we used in this model on our…
Also check this 2019 Godzilla: https://cults3d.com/en/3d-model/art/godzilla-figurine This is a 3D scan of a Godzilla figurine (1989/based on Toho Pictures’ Godzilla vs. Biollante) made with an Artec Space Spider by Laser Design. It had…
Batman's signature weapon, the Batarang. This is based on Tim Burton's 1989 folding Batarang from the movie. This was my first time modeling with surfaces in Fusion360, it was a challenge, but worth it. Getting the lines to flow like the…
I bring you the most faithful version of the Batman logo from the 1989 movie starring Michael Keaton. It's the logo that appears as the Bat-signal and also on the movie poster. It's practically a perfect copy. I also added two holes of…
Replacement pulls to release the rear seatbacks.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
1989 (Taylor's Version) Lithophane made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
1989 Batmobile, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
This model is compatible with the lego system.
Here's a super handy dandy Batman 1989 Logo (you know, the one with Michael Keaton) candy dish bowl. Useful for putting stuff in! Please contact us if you'd like to have this printed for you! Check out more great home organization,…
This is a remix of the race truck body by MarkerDave created for the WLToys K989 1/28th scale RC car. I've added some details to the body, closed the holes in the front and made it lighter. Width is 75mm. The body can be mounted perfectly…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I bring you the most faithful version of the Batman logo from the 1989 movie starring Michael Keaton. It's the logo that appears on the Batsuit and goes on the chest. It's practically a perfect copy. I also added two holes, approximately…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a self-designed body for a WL-toys K989 rc car. The design is based on the SAAB 9-3 sportscombi but with a wide bodykit to fit the dimensions of the K989 chassis and a Hirsch inspired wing in the back. I modeled the body in…
Here's my version of the Batman Vs Superman Batarang. Should be about 6.5 inches long. Be sure to post a make and check out my other models If you like my work and would like to support it and future projects, you can buy me a…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A set of drift wheels for the WLToys K989 rc car. There is a right and left wheel so that the angle of the spokes look the same. But there is no problem with putting them on either side of the car. I have printed these wheels in both PLA…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Tesla Cybertruck for WLToys K989 chassis. You'll need 6 screws M2x6mm Print it with 2 perimeter and 15% infill. Chassis: http://bit.ly/3ur6jBr 6x M2 x 6mm Screw: http://bit.ly/3jy205c Go and check out my other bodies for this chassis. Cab…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
found a shell of the body of the jeep somewhere online, going to post that by itself but this one i added wheels and a middle to.
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
LEGO 1989 Porsche 930 Cabriolet
I have created a simple replacement housing for the Liebherr activated charcoal filters. The original housing included a filter fleece, which I wanted to leave out of my design and placed the struts closer together. Simply print in PETG…
After breaking a lot of stock chopsticks, here is a reinforced edition. It is also more precise and limits the play at the wheels. Choose the right STL version for your balls : 3.4 - 3.5mm are for stock plastic hub carriers, and 3.5 -…
I designed this steering knuckle for my k969 because mine broke
I printed in PETG, 0,2 mm, 4 perimeters.
This is another body for the WLToys K989 chassis. This time it's a Low Rider Delivery Truck. Print it with 2 perimeter and 15% infill. Chassis: http://bit.ly/3ur6jBr 2x M2 x 6mm Screws: http://bit.ly/3jy205c 2x M2 x 10mm Screws…
I created this model of 1989 (Taylor's version) beads to make friendship bracelets with. Please note I made them as small as possible because I found that created the most beautiful bracelets. Filament printing did not make these as…
This is a 3D printed neon sign shell designed as the 1989 Batman Symbol. For build instructions and a compatible parts list, see this 3D Printed Neon Sign Tutorial . There is also a video for how to create your own custom 3D printed light…
Honda Civic Side View.
This is a larger bumper than the stock one to protect your front drive train while driving your car fast. It can prevent breaking the turnbuckles, A-arms or steering hub carriers in case of front impact. This is compatible with WLtoys…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is Batman's batarang - this…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Enclosure is inspired by following things https://www.thingiverse.com/thing:1075568 and https://www.thingiverse.com/thing:1075568 . Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: No Resolution:…
Two-color Toyota logo model, parametrized in a .f3d file (also .stp and scalable .stl)
Bill & Ted 3D printable model. Prints in 3 parts. The figures, the phone booth and the base. First print the figures, adjusting the size to your needs. Then print the phone booth, adjusting the size to fit the figures you printed, and…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Printed at 0.20mm Quality layer height PLA
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I printed both parts in PLA. For smooth drifting you will have to sand down any imperfections, but it isn't necessary.
Pet Semetary - Church - "Mommy, Church smells bad..." - 1989 3D printable model.
Parts for wltoys- rc cars
Seinfeld - Elaine - 1989 3D printable model. Super easy to print!
First, I made the two top pieces: “Top Half A & Top Half B with 3-”Center Dowels" then glued them all together. I used “Glazing & Spot Putty” I bought from any auto parts store and hand spread it over the top but be careful not to get any…
This is a remix of the E3DBuggy for the WLToys K989 1/28th scale RC car. With this chassis you'll have a functioning rolling E3DBuggy. The body can be mounted perfectly to the chassis. Print it with 2 perimeter and 15% infill. Have fun…
This is the 1989 chevy LA Kings logo made as a keychain as well as just the logo.
Seinfeld - Kramer - 1989 3D printable model. Super easy to print!
This for the original 1989 HeroQuest box. It has a ‘pull out’ case for the Hero Player which will contain their character sheets, figures, dice, and any cards they have collected so far. There is a HeroQuest Door holder and enough space…
A cover to prevent dirt, dust or small stones getting to the gears. (This is a remix of Dionarap's design.)
This is my self-designed wheel with a separate rim and tire. This is a design that prints the rim separate from the tire to be able to swap the tires for different materials. I have printed the tire both in PLA and TPU. Print Settings…
Seinfeld - George - 1989 3D printable model. Super easy to print! this one will print at an angle on your print bed, leave orientation as-is for best print.
Family Matters - Steve Urkel - 1989 3D printable model.
1984-1989 Corvette C4 Fuse Box Cover Lock Knob that I made for a friend, based on the original part in SolidWorks.
Western Movies - Lonesome Dove - 1989 3D printable model.
WLtoys K989 or K969 (brushless) motor mount, uses original hardware and fits without modifying the chassis
UNIT variation insignia first used in Battlefield (1989) UNIT is a fictional military organisation from the British science fiction television series Doctor Who and its spin-off series Torchwood and The Sarah Jane Adventures. made this in…
Replacement servo horn for the 284131 (and k9x9) with smaller holes to allow moving to outer hole and increasing steering angle. Holes are 1mm which is very tight but works. Modify / drill the hole out a little if you want an easier time…
Seinfeld - Jerry - 1989 3D printable model. Super easy to print.
Weekend at Bernies - Richard, Bernie & Larry - 1989 3D printable model.
Pet Semetary - Pet Semetary Scene Collage - 1989 3D printable model.
This is a replacement for the hockeystick used in the playmobil sets
Blind Fury-Nick Parker-Rutger Hauer - 1989 3D printable model.
A Nightmare on Elm Street 5_ The Dream Child - Baby Freddy - 1989 3D printable model.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Custom rims (wheels) for Wltoys K969, K989 or 284131. Can be printed with 2 colors without a special multicolor printer. Just add a stop a the right height in the slicer and change the filament during the print. The holes are very tight,…
This is a remix of my cab over race truck to make a cab forward version. Body is created for the WLToys K989 1/28th scale RC car ( http://bit.ly/3ur6jBr ). The body can be mounted perfectly to the chassis. Print it with 2 perimeter and…
the stock rear part is broken easily, so I found a model and fixed some geometry issue and enforced it. enjoy! here is a small video on how it drives :) and one more updated: just broke the same part on the other model 284131 - and it…
Give extra clearance to your K989 with this 50mm wheels. Also increase track width to 102mm. Rim are compatible with 43.2x22 lego tires. This is not compatible with the default body shell, the wheels rub on it when you turn. Rims are in…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Pet Semetary - 1989 3D printable model. Super easy to print. This is a very large model and will take a long time and a lot of material to print.
This is an accurate door base for original 1989 HeroQuest game, as close to the original as possible. Do you like my design? Print, upload your MAKE, receive Prusameters! Please leave a “like” …. ❤ Feel free to follow me …. ✅
WLToys - Work/Display stand Introducing the ultimate display and work stand for your 1/28 WLToys RC car! Designed for both hardcore enthusiasts and casual tinkerers, this stand is like a throne for your miniature speed demon. This stand…
Seinfeld - Soup Nazi - 1989 3D printable model. Super easy to print, prints all at once, then just stand figure behind the table.
This is a custom body post designed for the K989 RC car. The front and rear body posts are slightly different to accommodate the front shocks. They are designed to be used with a neodymium magnet with a diameter of 10mm and a height of…
Dynasty - Sammy-Jo Dean Carrington - 1981-1989 3D printable model.
Taylor Swift album 1989, CD holder wall mounted
Dynasty - Alexis Carrington Colby - 1981-1989 3D printable model.
Pet Semetary - Jud & Gage - Gage wants to play - 1989 3D printable model.
Last year, I set myself the challenge of designing a 1/28 scale radio-controlled car, and I’ve finally decided to share my model. This small RC is fast, it runs well and it's very fun to drive, but first and foremost, it's a truly fun…
Iconic Movie Props - Back to the Future 2 - The Hoverboard - 1989
Here's some wheels and tires for the WLtoys 284131. I printed the rims from PLA and the tires from 95A TPU. They get significantly less grip than the stock rubber tires which is fun for indoor drifting. I included some larger rims and…
Color order: Black, Dark Gray, Light Gray, White. Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts…
