Counting matching models…
As the original description states, the model can only be used with the PAP 20 A1 battery . I modified the model slightly and designed/edited a spring holder , so now it can also be used with the PAP 20 B1 model . I made it for myself and…
i needed a battery model for f360 for another project but i couldn't find it, so i made it. i share with you all for any purpose you might need in future. i hope it helps 😊
This is a cover to hold a cigarette lighter receptacle, a switch and a display for battery charge status from aliexpress.com if you have a 12V usb chager and an old UPS battery laying around you can use this to make a handy little…
This is a battery box for the Bioenno BLF-1209A 9ah battery. It includes 2 sets of power poles, and USB A and C adapter. I made it to plug into the existing plugs on the battery so I did not have to cut the battery leads to keep the…
Replacement adapter for the proprietary output connector. Through holes are sized for 12awg silicone or smaller wires. Recommend 98-99% scale for first print as full scale is a bit tight. supports highly recommended. RTV or silicone still…
For best print quality use support interface with another filament type (eg. PETG part - PLA support interface layer)
Replacement wheel assembly for the lower rack of a Samsung dishwasher, designed to mount onto the original attachment point. Wheel look matches factory design. There are 2 files: SamsungDishwasherSpareRoller.step - wheel only file…
Converts the standard 8mm scooter plug to an xt30 for charging. For the output adapter I made this Attach wires to xt30 before gluing. Hotglue/silicone rtv to glue xt30 in adapter. supports currently required
