116 models
Curled rat, second half 19th C CE, by Suzuki Masanao, now in the collection of the Minneapolis Institute of Art. improved version of an older model I fixed up.
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for one variant
This is a storage/travel case for the Kindle Oasis 9th Ed model CW24Wi. The kindle is held in place by magnets. I like the slim form factor of the caseless Kindle, so this case is designed to keep the screen safe, while being easily…
Print approx. €4.49–€5.49 excl. taxPreliminary estimate for one variant
This stand holds a Dell Thunderbolt dock (model WD19TBS) and a laptop. Notes Room for front USB cables attached to dock Cables can be routed through stand Does not block airflow Leave laptop open to act as a second monitor Printing Does…
Print approx. €25.83–€31.56 excl. taxPreliminary estimate for PETGSource material: PET
Zur Verwendung als Drehnabe für 3-9 Haltearme mit Konus-Schwalbenschwanz Sicherheit, Schnellsteckbefestigung. Ausbaufähig zur Wetterstation(Windgeschwindigkeit, Niederschlagmenge oder alternativ als Tier-Futter-Tränke…
Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
29T pinion compatible with the Kyosho Fazer FZ02 RC touring car. Provides additional torque/acceleration over stock 32T pinion, at the expense of some top speed. Pitch is 48DP (48 teeth per inch of diameter) and should be compatible with…
tow behind tractor with forage superstructure created according to the original behind tractors created by @MrHanjak, the corresponding scale of the model is 350%
***NEW v2 with better printing and HD graphics now available here: https://www.printables.com/model/1516164-star-trek-voyager-relativity-tricorder-v2 Here is my take on the 29th century tricorder from the Star Trek: Voyager episode…
vlek 9t s nástavbou na klády - For size to models of MrHanjak tractors use 350%
Designed a mount to hold a WD19TBS dock to the bottom of a desk. It is designed to slide in from the back with a clip built in to add friction to hold it in place. Additionally, there is a similar mount for the power supply (PSU). The…
Here's a 29th century phaser as seen in a couple Voyager episodes. Putting it together should be easy as there are few parts. They are split up to be mostly support-free but only a little bit of support will be needed on the emitter…
Wanted to round out my 29th century collection and this was an easy one to design. I printed the silver part standing up for better resolution, but it can also work lying flat though it might not look as good. Update log November 9 2024 -…
vlek 9t s nástavbou na kulaté balíky s balíky. For size to models of MrHanjak tractors use 350%
Any Cubic Kobra 3 X-Axis PTFE 9 Tube gimbal. This is an new design that was requested by a user for a gimbal mount that can handle 8 PTFE tube from 2 Ace Pro units. This gimbal mounts allows freedom of movement in all axis relieving the…
Simple model made in tinkercad, can be resized with some trail and error. Made so i can play some 9th age with me bois after 40k got too anoying. I printed it with some crappy PLA and 0,3mm layer hight, wouldn't invest any more in it.
Crank up the horizontal expansion for smaller prints! (0.2mm in Cura works great) -- 19th Century Whaleboat Based on this 27' 1866 Royal Navy design Benches are combined into one .stl, will need x10 of “thowel.stl” as designed Oars,…
“This chubby, boyish image of Ganesha seated with the soles of his feet pressed together developed in Indonesia, where he is particularly popular. Originating in India, he gained special importance across Southeast Asia and even in China…
Dell WD19TB TB3 dock with 120mm Fan Design Goal This is an updated version of my WD-15 USB-C dock ( https://www.thingiverse.com/thing:4335172 ). I picked up a WD19TB to address some other upgrades I made, and decided to take another stab…
I added a better access to the power button.
The Yakovlev Yak-9T was the second variant of the Yak-9 fighter aircraft family. Instead of the usual 20 mm ShVAK cannon, it was armed with a 37 mm Nudelman-Suranov NS-37 cannon with 30 rounds. To compensate for the heavier nose, the…
Needed way to mount iPad to Sim Rig. Main use case is to use iPad as MCDU in Flight Sims. Found great wallmount from Bear_Grills and used it as base of this work. iPad slides in pretty well and is securely hold down because of the angle…
Xaiomi 9T K20 Pro Phone Case 4 versions 1.4 mm thick back 1.0 mm thick back Split for PETG No Split for TPU Print Settings Printer: Geeetech E3D V6 Rafts: No Supports: No Resolution: 0.2 Infill: No Filament: Generic PETG / TPU Any Notes:…
This is a mount for the Holosun 509T pattern of micro optics. It's designed to use 30mm M3 hex head capped screws and hex nuts. I've tested printing this with up to a 0.6 nozzle and 0.2 layer height- smaller nozzles and layers will work…
Model of EMP N6964 9T 230kv Brushless Motor I use this model as a template to build a motor mount for an RC aircraft
Wheels do not spin. Supports required. Fan request. Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d) (heavilty modified to make it printable.)
This is a simple but handy way of slipping a few medication tablets (i.e. indigestion pills) into your pocket or handbag. It's slim design fits nicely away into any small pocket or compartment. Pills are dispensed by sliding the lid back…
Historical Italian Military Leader – Premium 3D Miniature Bring history to life with this premium-quality 3D miniature inspired by an iconic Italian military leader of the early 20th century . This model features exceptional sculpting…
An under-desk power supply holder for the Dell ThunderboltDock WD19TBS.
“Realistic I4 piston motion” 4piston 1.9tdi variation of popular print in place fidget toy. Enjoy and please like :D
This is a 12x7 keyguard with accommodation at the top for the word frame in LAMP words for life. This includes accommodations for the home button and front facing camera. It is designed to fit to a thick foam case but can be attached in…
I made this Wallmount for the iPad 7th gen. Should also fit 8th and 9th gen I made the fitment a bit tight so nobody could just pull it out. (still possible with force but be careful)
Vesa Dock Printable with no additional parts. Vesa Dock - With Magnetic Cable Holder Requires screws and magnets. Part Where to buy Magnet 8X3MM * 2 - 7 https://www.aliexpress.com/item/1005001586934809.html 2M x 8mm Self Tapping Screws *…
Gear for any universal 3mm shaft, this is lock tight version so its will permanantly attached make sure to use glue or locktite Onl y print with resin 3D PRINTING SETTINGS Standard type resin only, not suitable for water washable…
Simple model made in tinkercad, can be resized with some trail and error. Made so i can play some 9th age with me bois after 40k got too anoying. I printed it with some crappy PLA and 0,3mm layer hight, wouldn't invest any more in it.
Best in brown or orange filament normal is for action figures and large is for, well I don't really know you can choose.
Wall Mount for Dell docking station. Use 2.5M (10mm max) screws for docking station interface. Standard wood screws for wall. Mount to docking station orientation can be rotated 90deg
My girlfriend received a dell XPS 13 and a WD19TB dock from her job. The laptop is basically always tucked behind her monitor sitting on its box, connected to her monitors so i made this simple dock to keep both the laptop and the WD19TB…
Print in a filament type that you believe can take the beating ;) Original gear are machined nylon. EDIT added 39T Helical gear to ;) Proper cad files can be found at GrabCad.…
Vytvořil jsem vlek pro můj traktor: https://www.printables.com/model/1204392-zetor-7745 ZDE JE NUTNÉ ZNOVU VYTISKNOUT RÁM TRAKTORU pro ty kteří již vytiskli původní model 8.3.2025!!!Původní zapojení bylo přepracováno aby do sebe…
Gear wheel with 49 teeth, module 3, wheel thickness 10 mm
Replacement button for the Meta M99T MT100 keyfob. i printed in PLA with 0.16layer height.
A no-supports needed print to hold your docking station & laptop vertically. This is designed to perfectly fit the dell WD19TB thunderbolt 4 dock, keeping all I/O & air vents clear. It can also support a laptop that's at maximum 23mm…
This model is a planetary gear system designed for learning and experimentation. It demonstrates the mechanics of an epicyclic gear train with the following parameters: Sun gear: 12 teeth Planet gears: 9 teeth each Ring gear: 30 teeth…
This is a recreation of two different kings, a chariot (rook), and a elephant (bishop) found in Nishapur, Iran, believed to be from between the 9th and 12th century. The pawn and the knight are based on other pieces from a similar time…
Mobile antenna holder MFJ 1699T, mounted on IC-705 radio Category: Hobby
è una copia in scala 1:1 del motore YAHUA 49tyz-a2 che utilizzo spesso nei miei progetti, il modello non è da stampare ma serve per poter disegnare supporti in grado di sostenerlo, per poter centrare i fori delle viti e per centrare il…
Remix of Original for Dell Precision 5560 + WD19TB Dock USB Plug Support
Revolutionary Fighter – Cold War Era 3D Miniature Add a bold and iconic presence to your collection with this high-quality 3D miniature inspired by a revolutionary fighter of the Cold War era . The model features a strong, charismatic…
Works seamlessly with Scottyujan design, requiring glue to connect the two parts securely. Achieves a perfect fit with both iPad 7th and 9th gen models.Experience a sleek and functional design that complements your iPad seamlessly.…
During the Napoleonic Wars, British Army officers wore gorgets as a metal, crescent-shaped badge of rank suspended from the neck, symbolizing "on duty" status rather than providing protection. These items, typically made of gilt brass,…
i tested for little time and it didnt break but fitment is hard it still needs fix or you can drill hole if it doesnt fit
A set of four organizers for the classic board game Wiz-War (9th edition, the latest version published by Steve Jackson Games). The inserts support sleeved cards and has space for the health dials, the various tokens, and the standees.…
Replaces GM 88937926 This part is no longer available online. This print will replace the clip that breaks often.
Made this back in 2023 for video game and now decided to make it 3D printable by making it multiple parts assembly thus it's FDM printer friendly as well , included it in .3mf, .stl format in parts and the .obj file that has the full…
sprocket 19T NYLON AND ABS
It can be really annoying when the sun is in front of you and low in the sky... those with red dot sights will recognize this problem. This sun shade attempts to resolve that problem. Or, you can use it to occlude your dot to ensure that…
Simple under desk mount for Dell WD19TB Thunderbolt Docking Station.…
JG-R9T2 Juggernaut BN Edition for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files •…
Habe für den legendären 1.9TDI mal ein Schlüsselanhänger kreiert. Was gibt es schöneres als diese motorische Legende die unverwüstlich ist zu würdigen. Meine Empfehlung nutzt beim druck PETG da das Material grad in der Hosentasche länger…
A dock holder for the Dell WD19TB and desktops up to 38mm (1.5"). Printed on a P1S using PLA (Polymaker Panchroma matte charcoal black). No supports needed, default setting with exception to the following. Wall loops: 4 Sparse infill…
We celebrate Milan's 19th victory of the Italian football championship with a key ring, a medallion and two badges. All to be printed in the classic colors RED, BLACK and WHITE You can find all my models here , thank you who will…
Golf 4 1.9TDI 3,5inch sport filter adapter. Print in ASA/ABS or better. (Maybe PETG could work) Fits on original MAF. Has a fitting for vacuum hose. Should fit any 3,5inch (89mm) inside diameter filter.
Mit diesem Adapter kann ein alter Dyson DC29 ... an die Shaper Origin Gen 2 angeschlossen werden
My current project is to add an openGrid desk mounting system under my desk. To fix my DELL dock i remixed the nice fitting parts of 3Bdo with some Multiconnect snaps . Those snaps can be easily clicked into the Multiconnect snaps that…
Seega is a two-player battle game popular in 19th and 20th century Egypt. Players place pieces on a board, leaving the center square empty, then move their pieces to capture opponents by surrounding them on opposite sides. The goal is to…
Attached is an insert/organizer for Clinic Deluxe Edition 69th Extension, both blue and pink versions, by Alban Viard, published by Alban Viard Studios. Contents: 1x-CDE_69B_Cryogenics_Bin Holder for Cryogenics module in the blue box…
IO Shield for Intel DX79TO motherboard. This model was reconstructed digitally from an image and as such may not be perfect. Imperfections are mostly unnoticeable at scale.
You need the RS280 motor for long wind-down You can use the tinkercad for printing for all my models
I built this design off a logo. I used the standard red, black and yellow (or gold). The layers can be set for color changes depending on how it's scaled. The gold really shines vs the yellow, but both look great. I chose to iron the top…
29th Infantry Division Insignia. SVGs included to recreate or modify 10mm hight 20% gyroid recommended infill. Color changes: NOTE: Highly recommend slicing and then seeing in your slicer where the level changes are. This is what works…
Different movement tray formats for skirmish units in Warhammer Fantasy (8th and 9th edition). These trays are designed to help you organize and move your miniatures more easily on the battlefield. Available tray sizes: For 20mm bases:…
The original files almost worked for my purposes, but left a bit too much of a side-to-side gap. I overhauled the design to fit a 7/8/9th gen iPad in portrait orientation (with a small amount of wiggle room for a low-profile case). Not…
I made this to display to hold https://www.printables.com/model/509873-us-armys-3rd-infantry-division-patch
I made this to transfer my steering wheel buttons on to the new quick release system. As the car only allow you to use the steering wheel button to control the information screen on the car, it is essential for me to keep it. My car is a…
the internal diameter is 23mm. recommend brim print speed normal for mat finish will take 16min an Prusa MK4.
Found this great WD19dc dock but my thunderbolt input was covered. Added a cutout for it.
I use the Depstech DS529 to inspect and work on the internal areas of machinery. I needed to be able to mount the camera display and free-up both hands to guild the camera end of the optical cable as well as work on specific parts with…
A simple shock case I made in a few hours for my Kindle Oasis 2. Print with TPU filament. I didn't feel like reprinting it, so it uses a piece of foam under the thin portion of the display to shim it out.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Sunlu Black Transmission Distance: 0.1 PLA Sunlu Gray Transmission Distance: 1.3 PLA Creality White Transmission Distance: 4 This print…
This bracket goes in between the license plate light screws and the rear bumper. You might have to take the metal clips off your license plate light assembly first if you plan on using a bigger screw - I was going to just use the original…
It’s better to make this model from PLA plastic.
This mount securely holds the power supply (power brick) of the Dell WD19TB Thunderbolt Docking Station under a desk, on a wall, or on furniture. The design is intentionally minimal to reduce print time and material usage while still…
175th infantry regiment 29th infantry division SVGs included to reproduce for customization, in Tinkercad center the art. 10mm in height would recommend 20% gyroid infill NOTE: Highly recommend slicing and then seeing in your slicer where…
9th Edition Terrain Card Holder for WH40k Simple card holder for 9th Edition Terrain Cards. Intended to hold the card upright where laying the card down is inconvenient or for better visibility. Category: Toy & Game Accessories
9TP is a 1/35 scale model of a real-world military armored vehicle (tank, self-propelled gun or armored carrier) made for display and diorama building. This 3d printable vehicle model is ideal for wargaming scenery, tabletop displays,…
ball-bearing hub 121096 Штатный ремень со штатными хабами имел излишнее натяжение в крайнем положении регулировочного хаба. Сделаны смещённые хабы для правильной регулировки натяжения. Шкив адаптирован для печатью из POM Хабы адаптированы…
This is an update to the original model. My Dell Precision laptop from work would not fit in the slot meant for the laptop. It was too thick. So, I expanded that slot by 10mm to allow for larger laptops to work in this stand. It works…
the rubber grommets that slot into the rear of the airbox for a 9th gen civic si 2.4L
I tested it on 2013 Honda Civic sedan, so I assume it will work for all 9th gen cars. This will all your seat belt buckle to move around like the stock one even if you use after market harness screws.
Small circular lid that covers Lionel and potentially MTH vat cars. includes grooves. (sorry forgot to take photos before giving it to the friend.) does not require specific print settings.
Extrapolated from the Star Trek: Voyager episode Relativity based off crew of the USS Relativity uniforms using The Next Generation and Voyager ranks as templates. You can drill holes on the back to put a pin on for a clasp as you see…
Found this great WD19dc dock but my thunderbolt input was covered. Added a cutout for it.
Revolutionary Fighter – Cold War Era 3D Miniature Add a bold and iconic presence to your collection with this high-quality 3D miniature inspired by a revolutionary fighter of the Cold War era . The model features a strong, charismatic…
Historical Italian Military Leader – Premium 3D Miniature Bring history to life with this premium-quality 3D miniature inspired by an iconic Italian military leader of the early 20th century . This model features exceptional sculpting…
I made this to transfer my steering wheel buttons on to the new quick release system. As the car only allow you to use the steering wheel button to control the information screen on the car, it is essential for me to keep it. My car is a…
I tested it on 2013 Honda Civic sedan, so I assume it will work for all 9th gen cars. This will all your seat belt buckle to move around like the stock one even if you use after market harness screws.
I made this Wallmount for the iPad 7th gen. Should also fit 8th and 9th gen I made the fitment a bit tight so nobody could just pull it out. (still possible with force but be careful)
Gear for any universal 3mm shaft, this is lock tight version so its will permanantly attached make sure to use glue or locktite Onl y print with resin 3D PRINTING SETTINGS Standard type resin only, not suitable for water washable…
![iPad 7/8/9th Gen. Portrait Holder [Multifunction Arm Mount]](https://media.printables.com/media/prints/cc138274-b68f-413c-a7f9-348c095b93bb/images/11650766_45e86625-6bec-4918-9874-2bdd91491bbd_59f44b1d-a346-4afe-afe6-cb4742fea41b/img_20260106_130544_bokeh.jpg)
![9th Gen Kindle Oasis 2 Shock Case [Rough]](https://media.printables.com/media/prints/76baf19b-45a5-42de-a531-d1a7828f19f4/images/10642054_f39fef89-e9c4-459d-967d-9757d01bb213_f93af888-c46a-40a7-bf32-df25e74b2a70/kindle-oasis-2.jpg)
