Counting matching models…
There is an updated bin design which has latching lids available at the links below (under “Other Stuff”). The version here does not latch closed (it was never intended to have that function, and only has a tab). Update - 2/20/2026: If…
These are the latest version (v 2.2) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…
an easy-to-print ram mount holders for Mikrotik RB5009 for 10inch or 19inch rackmounts.
These are the latest version (v 2.0) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…
THIS IS UNTESTED - PRINT AT YOUR OWN RISK (but please provide feedback if you do). Version 2.4 (2/20/2025) small update to fix incorrect plate descriptions in the 3mf profile. The current profile is…
Raiser / stand for MikroTik RB5009UG+S+IN and RB5009UPr+S+IN POE IN/OUT (thank you @Omni_RF for testing) router. With the stand the ground clearance is 24mm. Thus, you can route your network cables underneath the device and also help to…
SPA Base para termo marca Lumilagro modelo T0376-L09U Dimensiones: Øinterior 82 mm. Øexterior 87 mm. Altura: 23 mm. ENG Base for thermal bottle "Lumilagro" model: T0376-L09U Dimensions: internalØ 82 mm. externalØ 87 mm. Height: 23 mm.…
====STOP==== Only continue if you've already been to https://www.printables.com/model/592545-gridfinity-bin-with-printable-label-by-pred-parame . ====STOP==== This project contains the corresponding 9u/12u/15u versions of Preds'…
This is a remix of SalsaVerdeByTheGlass's awesome "Rack for BFS - 20 Bin" over on MakerWorld , and is fully compatible with the original design. This design builds on the original with sizes for 9U and 12U cases. Use superglue when…
This is just a replacement for the original Fluke adapter. We often lose them at my work so I just modeled the replacement. It fits the Fluke IR189USB IR serial interface and works with 187, 189, and whatever other Fluke multimeters this…
Yamaha YHT-399U HTR-5063 RX-V467 RX-V367 RX-V371 AV A/V Receiver Controller Holder
When you own a desk bike from Flexispot and you want to put it away afterwards the training , you already noticed that it is pretty exhausting to hit the buttons to release the lock of the legs from the bike. Therefore we designed a tool…
Support for the Mikrotik L009UiGS-RM router device. It allows to hang the device on a switchboard.
Under shelf mount for MikroTik RB5009Uxxxx and the other models that share a case size (MikroTik have tech drawings on their website for comparison) Enough room above for cable routing and some heat dissipation. Once brackets are attached…
print laid on its side with supports. layer 0.2, nozzle temperature 207 °C, pad temperature 55 °C, material PLA.
Upon installing the Viper 509u I wasn't too fond of the look and if they were knocked they would have to be readjusted. Along with keeping up the appearance of my vehicle I was wanting something a bit neater then the provided bracket, so…
After about 12 iterations, this finally came out right... This nifty slide-on attachment will allow the Icy Box IB-189U3 M.2-enclosure to run full-length drives. I printed it in MSLA due to the tight tolerances, FDM might need some work…
Just slice and print. I've used PETG for better durability, and lightning fill to reduce the amount of filament. Nothing special, fits 5 batteries, with an easy fit Height is 9u, like all my go pro storage for consistency and box is…
Really simple design. The old locking clip mount breaks easily so I just made a holder to sit it in. Probably not ideal for outdoor use but for indoor use it will work great. It has 2 holes in it for drywall screw mounting. You can also…
Bought the wrong type of capacitor for my BEKO dryer... capacity was right, but with wrong foot. Instead of returning it, 3d print solved my issue. So this accepts the Ducati capacitor and has standard M8 output..(just add the M8 bold...…
Gridfinity box in dimensions 6 x 9 x 9u. Generated with https://www.gridfinitygenerator.com
A IKEA SKADIS mount for the RT-AX59U that uses the factory base/backplate as a part, so you don't lose that bit of plastic to some junk drawer. It's not a robust mount, so make sure you print it from strong materials. If you push on the…
Just slice and print. I've used PETG for better durability, and lightning fill to reduce the amount of filament. Nothing special, fits 5 batteries, with an easy fit Height is 9u, like all my go pro storage for consistency and box is…
This is just a replacement for the original Fluke adapter. We often lose them at my work so I just modeled the replacement. It fits the Fluke IR189USB IR serial interface and works with 187, 189, and whatever other Fluke multimeters this…
Really simple design. The old locking clip mount breaks easily so I just made a holder to sit it in. Probably not ideal for outdoor use but for indoor use it will work great. It has 2 holes in it for drywall screw mounting. You can also…
THIS IS UNTESTED - PRINT AT YOUR OWN RISK (but please provide feedback if you do). Version 2.4 (2/20/2025) small update to fix incorrect plate descriptions in the 3mf profile. The current profile is…
These are the latest version (v 2.0) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…
These are the latest version (v 2.2) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…
This simple hanger allows you to hang your Mikrotik router on a wall. The router is fixed with 4 M4x8 screws to the hanger. Printed with PETG but PLA will probably do fine as well
Gridfinity Breadboard Holder Stackable 1x1x9U. The model consist out of 2 parts that can be easily glued together. reason for this is to keep maximum strength with minimal filament. Glue the bottom and middle part together. The top part…
I use an Android tablet for offroad navigation and marking points of interest. I recently upgrade to a 10" tablet, this required a new mount to hold it. I am a big fan of RAM Mounts and have used there X-grip line offroad for years. So I…
Basándome en el circuito propuesto por Mark ( http://kimboricha.blogspot.com.ar/2013/12/build-usb-to-fluke-189-irinfrared.html , pero el blog ya no existe), y reemplazando el conversor USB-Serial por uno comprado como el de la foto,…
The Ocktron LG is a 3D printable large sized home lab rack, perfect for projects up to 9U height(15.75 inches). Engineered with our new Frame 2.0 with easy paint design , less screws, ergonomic handlebars, art-deco style and functional…
9x3x9u Gridfinity Scoop Box generated with https://www.gridfinitygenerator.com
I lost the vertical part of my monitor stand during my move. Designed this replacement part to fix it :) It's a little higher than the original. I had not too much time, so it's rather a practical than a beautiful design. Most people…
I got this device with no PSU's and a new one is 250 a piece, i saw that it had an ATX connector and installed a normal 90x50 PSU in it, should fit various models…
I wanted to be able to fit this in a 9u container, so I just increased the height a bit of the bin
Remixed bin to 9u height for storage boxes
I needed a more low-profile version. It's less than 1U, allowing me to add a slim keystone panel below. It's based on: https://www.printables.com/model/341082-mikrotik-rb5009ug-10-inch-or-19inch-rackmount-kit It's less stable than the…
A 2x3 plain bin for use in Gridfinity, with height of 9U. Could not find one so made one myself. Perfect for use in Ikea Alex drawers. Support magnets and screws.
![Gridfinity Bin with Printable Label by Pred (parametric) [files for 9U, 12U, 15U]](https://media.printables.com/media/prints/d3033268-bd44-4b37-8278-ba5e98c4e101/images/9420821_969a1154-1dc0-43fd-8bb4-e5fd9f5c19b9_e0a5db24-4be9-4ae3-983f-ef7327c400f9/img_1893.jpg)
