Search results: absima

Counting matching models…

Printables

Absima ASB1 Dämpfer-Federteller

Da der Junior unbedingt mit dem ASB1 fahren wollte, aber sich auf der letzten Fahrt zwei Dämpferteller verabschiedet hatten, mussten kurzfristig neue her. Ich habe sie in PETG mit 100% Infill gedruckt.

Order a print of this model

Printables

YK4106 Pro/Absima Wolf/FMS FCX10 thumb steer/FlySky MG11

Made it for my YK4106 Pro/FMS FCX10/Absima Wolf and FlySky MG11 radios (FS-MG11-BS, FS-MG11-BT-BS). I can barely reach the steering wheel with my thumb so I made this little adapter. 29-03-2026 : added a thicker version for a easier reach…

Order a print of this model

Printables

YK41012/Absima CR4.4eco updates

This is an own-created collection of updates for a YK41012 crawler (brushless version) At least some parts should be compatible with similar models from Yikong. Absima calls a similar model CR4.4eco or CR3.4eco How I Designed This…

Order a print of this model

Printables

ZD Racing/Absima Rocket AdB1.4/DBX-10 Skid Plate - Protection Chassis

Simple Skid plate for ZD Racing Absima Rocket AdB1.4 DBX-10. Tinkercad made. Just need longer M3x10mm screw. Print in PETG but PLA will work too.

Order a print of this model

Printables

ZD Racing/Absima Rocket AdB1.4/DBX-10 Sway Bar holder - Support Barre antiroulis

ZD Racing/Absima Rocket AdB1.4/DBX-10 Sway Bar holder - Support Barre antiroulis Print in blu PETG.

Order a print of this model

Printables

Absima ASB1 Dämpfer-Federteller

Order a print of this model

Printables

YK4160/Absima Wolf stand

Print a pair of face, print the beams, screw with M3x10. Category: R/C Vehicles

Order a print of this model

Printables

YK4106 Pro/Absima Wolf/FMS FCX10 thumb steer/FlySky MG11

Order a print of this model

Printables

Yikong YK4106/Absima Wolf lighter spare wheel

Designed to take place of a 115mm spare wheel. The YK4106 Pro has a huge rear weight bias, not ideal. This lighter spare wheel will allow to gain around 50gr over the real spare tire ... not much, but every little things adds up. May fit…

Order a print of this model

Printables

Absima 1:24 X-Racer Buggy & Touring Car Stand

Order a print of this model

Printables

RC thumb lever Absima / Yikong

Simple wheel extender for Dumborc controllers. It's mean for Absima,Yikong,Amewi and others using this contoller :)

Order a print of this model

Printables

Absima Yucatan / Yikong YK 4082 sidestep / rockslider

I'm modeling them for friend with Yucatan. He didn't broke them yet unlike the original ones, so here is my files :) Just 1:1 replace part for these fragile rocksliders Printed with PETG 50% infill 2 perimeters (flexible)

Order a print of this model

Printables

Absima CR4S rope ring

A simple ring to attach a cord. Best to print it laying down. If the fit is loose you might want to use some glue. Set it to full walls for better strength

Order a print of this model

Printables

Absima CR4.4 eco roof rails

Hi. I got this fresh new Absima CR4.4eco Bronco style, and immediately started designing some stuff. Lets start with these roof rails. Actually, just one rail which is same for both sides, so just print twice.. Rail has holes for screw,…

Order a print of this model

Printables

YK41012/Absima CR4.4eco updates

Order a print of this model

Printables

Absima 1:16 RC monster truck rim

This is a rim for the Absima RTR 1:16 monster RC truck. It works also on many other Chinese 1:16 RTR cars. The original rim offset is too small and the inner rim hits on the steering arm. The rim is too thin and this results in that the…

Order a print of this model

Printables

Spoiler for Absima Speck B

I created this spoiler as an alternative for the Absima Speck B. It may also fit the Losi Micro B but I am not able to test my theory. I printed mine with Prusament PETG on the back side of the spoiler. See the screnshot. Should work fine…

Order a print of this model

Printables

Ansmann Absima Starter Box Wheel 2300033

Replacemet Disc for Absima / Ansmann Starterbox Printed in TPU i could not buy this replacement part, so i made my own Tags: starter box starterbox disc wheel ansmann absima replacement tpu 2300033

Order a print of this model

Printables

Absima AT2.4 Baseplate Forward

This forward baseplate was one of the first things, that broke. It is an essential part, trust me. :D If you like this and it helped you out, please buy me a coffee . ;)

Order a print of this model

Printables

Absima Truggy AT2.4 - Suspension Bracket

This is a replacement suspension bracket for the Absima Truggy AT2.4. Print a few and take them with you on the track. Want to buy me a coffee, because you appreciate my work? :D No problem → Over here please.

Order a print of this model

Printables

Absima Truggy AT2.4 - Steering Lever

This is a steering lever for the Absima Truggy AT2.4. Want to buy me a coffee, because you appreciate my work? :D No problem → Over here please.

Order a print of this model

Printables

Absima CR6P Halter

Halter für Decke und Wand für die Absima CR6P Fernsteuerung

Order a print of this model

Printables

Absima 7.2 Lipo Holder

Need to organize my lipo's in the fire resistant bag while moving around, not when charging, so I made a simple Absima 7.2 Lipo Holder for 3 1200mha packs sizes 65mm x 39 mm x 17mm) (aprox) per battery. Easy Print, no supports needed.…

Order a print of this model

Printables

Absima Sherpa CR3.4 Hood Hinge

I created this thing because there is no hood hinge on the Absima Sherpa. Print best in 0.1mm layer height. Screw hole underneath is for 2mm Screws Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Doesn't Matter…

Order a print of this model

Printables

Remote Control Transmitter Pistol Holder RC ABSIMA CR3P

Holder for the ABSIMA CR3P Transmitter. You can screw it at a side wall or at the top wall to let your control hang down. Print Settings Printer: Cetus3D Rafts: No Supports: Yes Resolution: 0.3 Infill: 20 % Category: R/C Vehicles

Order a print of this model

Printables

ABSIMA ASB1BL Front or Rear Skid

ABSIMA ASB1BL SAND BUGGY Front or Rear Skid also fits for these cars: T2M Pirate Sniper DF-Models Dune Fighter BSD Racing Prime Desert Assault MODSTER DUNE RACER could also fit for Redcat Racing Blackout...? enjoy!

Order a print of this model

Printables

ABSIMA ASB1BL SAND BUGGY MidFront SKID

ABSIMA ASB1BL SAND BUGGY MidFront Skid also fits for these cars: T2M Pirate Sniper DF-Models Dune Fighter BSD Racing Prime Desert Assault MODSTER DUNE RACER could also fit for Redcat Racing Blackout...? enjoy!

Order a print of this model

Printables

Absima Crawler CR2.4 Sand RTR + additonal JEEP Body - Body Post

Body Post for the Absima Crawler CR2.4 Made this for fitting the extra Jeep body... (could also fit the RGT RC4 Bowler / Barrage) Remark: holes must be drilled after printing and the posts aren't the right length, some cutting must be…

Order a print of this model

Printables

Absima ASB1BL Remote Control Speed Limiter for Kids

Speed Limiter for the RC on the Absima ASB1BL, so that my toddler can drive it too ;) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: Doesnt Matter PLA Category: R/C…

Order a print of this model

Printables

Absima ASB1BL Wheel Hub with Pin (4) Buggy/Truggy

Absima ASB1BL Wheel Hub with Pin (4) Buggy/Truggy Radmitnehmer 12mm (4) Buggy/Truggy Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.1 Infill: 100% Category: R/C Vehicles

Order a print of this model

Printables

Absima 1:10 wishbone

Absima 1:10 wishbone for Sandbuggy

Order a print of this model

Printables

Halter CR6 Absima RC TX

Das Absima Logo wurde im BambuStudio hinzugefügt. Gedruckt auf einem BambuLab X1C; 0,4 nozel; 0,2 Layer; Sunlu PLA+ white; no support (print vertikal); 15% infill Zu finden hier: https://www.thingiverse.com/thing:2058961 - danke an “…

Order a print of this model

Printables

ZD Racing/Absima Rocket AdB1.4/DBX-10 Skid Plate - Protection Chassis

Simple Skid plate for ZD Racing Absima Rocket AdB1.4 DBX-10. Tinkercad made. Just need longer M3x10mm screw. Print in PETG but PLA will work too.

Order a print of this model

Printables

ZD Racing/Absima Rocket AdB1.4/DBX-10 Sway Bar holder - Support Barre antiroulis

ZD Racing/Absima Rocket AdB1.4/DBX-10 Sway Bar holder - Support Barre antiroulis Print in blu PETG.

Order a print of this model

Printables

Vantage Spoiler for Absima AB3.4

Remix of the FTX vantage spoiler by JonnyG30 for Absima AB3.4 Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 100 Filament: Devil Desing PETG black Category: R/C Vehicles

Order a print of this model

Printables

Hobby plus Convoy / Absima CR-18 Servo winch and mount

I wanted a functional winch for my 1/18th scale mini-crawler, and designed this winch spool and mounting bracket for the Hobby Plus CR-18 truck I have. As long as the bumper mount hole pattern and frame width is the same, it should fit…

Order a print of this model

Printables

Absima CR4T Ultimate Steering Wheel for Sanwa foam rubber

I printed this RC Steering Wheel for my Absima CR4T Ultimate the design is based on an ATS 5 Star rim. To use this whee

Order a print of this model

Printables

YK4160/Absima Wolf stand

Choose the face, mirror one, print the beams, screw with M3x10.

Order a print of this model

Printables

Absima AMT8 seitliche Lipo Halterung

Bin dabei meinen alten Absima AMT8 wieder Fit zu bekommen. Habe einige Ersatzteile entworfen. Die STL ist für die linke Seite. Für die rechte Seitem einfach das Objekt spiegeln. Befestigung passen optimal am Rahmen.

Order a print of this model

Printables

Absima AMT8 Empfänger Box

Empfängerbox mit Kabeleinlässe und Schalterloch (19x12mm Siehe Foto). Verschraubt mit M4 Schrauben. Passt perfekt an den Absima AMT8 Monstertruck. Er kann aber im Prinzip auch an anderen montiert werden.

Order a print of this model

Printables

Absima Hurricane RC - Suspension - bottom part

The bottom part of the suspension of the Absima Hurricane RC Car. You have to remove the original part and push the "shaft" into this part. I've replaced one until now and it works fine. Print Settings Printer Brand: Prusa Printer: Mk2.5s…

Order a print of this model

Printables

Absima Hurricane RC - Wheel Drive Shaft

Wheel Drive Shaft for the Absima Hurricane RC Car. You have to use the metal stubs from the original shafts and push them into the holes of the model. Have a look at the pictures. I've replaced three by now and none of the printed ones…

Order a print of this model

Printables

ABSIMA 1:14 High-Speed Truck "RACING" 4WD RTR - Suspension Spring Holder

This is a replacement for the original bottom spring holder at the suspension of the ABSIMA 1:14 High-Speed Truck "RACING" 4WD RTR Printed in PETG for higher durability. Supports on build plate worked best.

Order a print of this model