Counting matching models…
Acoustic lenses designed to be placed in front of R1855's tweeters. (they are attached through the hex allen slots). The intent of those "lenses" is to reduce the beaming effect in high frequencies. In practice the difference is not huge,…
A non destructive mount for the acoustic panel aligned for a gap with 13mm width x 10mm depth
I wanted to make the top of my printer cool, and maybe help reduce noise. Part of https://www.printables.com/model/1263333-3d-printer-enclosure-parts
The holder allows fine position adjustment on the wall, ensuring the guitar is held securely and correctly. Printing recommendations: Material: PETG-CF PETG, PC, ABS, or ASA can also be used. Due to the threaded parts, PLA is not…
Coat hook for acoustic panel. Print out horizontally for a stronger hook.
Keep in mind to print with a brim enables, as it will warp(at least with PETG black it did). Also make sure that the dimensions are correct. Look at the onshape project to see the dimensions(To bored rn to look it up lol) onshape file
Updated model of mounting bracket with hole for nut
Dont print this smaller than what it alr is but you can print bigger if you want.
A compact holder that mounts on an edge using a U-shaped clip for simple, tool-free installation. The .stl file is included so the model can be printed directly or reopened and modified in other software such as Fusion 360, Inventor, or…
Celebrate craftsmanship and music with this detailed Acoustic Guitar display model. Featuring a classic cutaway body shape, defined sound hole, bridge, tuning pegs, and fretboard detailing, this sculpt captures the elegance of a modern…
Recommend petg as it has more ellasticity
Please print firstly only one testing knob and optionaly scale. Dimensions of your holding geometry can be different. You can measeure your holders first and than scale accordingly.
Can be hooked into the top of an Egger acoustic panel, and will fit in one of the grooves. Pull it down slightly to notch it securely into place, some wedges will bite into the cardboard. Print in the orientation shown in the .3mf with…
Can be hooked over the top of egger acoustic panels, if installed with the aluminium extrusion as shown. The back will hook fit in one of the grooves. Pull it down slightly to notch it securely into place, some wedges will bite into the…
A hanger that can be inserted into acoustic foam (tested only on 3cm to 10cm thick Basotect) and hanged on a screw placed in the wall. I used 3mm flat-head countersunk screws. It comes in two versions, depending on the thickness of the…
Could not find any models so I made one myself this fits acoustic panel with 15mm spacing and 12mm high and is press fit , easy to print ! Print laying down, fastprint,around 9min :)
This is a low-profile shelf bracket made for 7 3/4" wide shelves. It was designed to be low profile and thus needs to be reinforced with a 3/16" thick round rod. Ingredients PLA or PETG 3/16" cold rolled round rod:…
Transform your auditory experience with our exclusive collection of AI-Created QRD Skyline Acoustic Panels, meticulously designed to blend high functionality with aesthetic appeal. This world-first, innovative suite of 60 unique STL files…
Modulair Diffusion panels with LED lighting! disclaimer: Still in the process of figuring out product design, testing and documenting everything this will be a very early concept. currently I'm in version 8 or 9 (can't even remeber/ keep…
I made this desktop stand for my Qacoustics 3010 bookshelf speakers but surely they can fit other speakers as well. Recommend increasing perimeters for additional strength and preventing sagging, infill at your discretion but 30% is a…
The 3D model is an acoustic diffuser designed to improve sound quality by scattering sound waves across a wide range of frequencies. It features a series of geometrically arranged surfaces that break up sound reflections, reducing echo…
Best printed hole side up with minimal support. Tested in PLA 200 / 60
Acoustic lenses designed to be placed in front of R1855's tweeters. (they are attached through the hex allen slots). The intent of those "lenses" is to reduce the beaming effect in high frequencies. In practice the difference is not huge,…
Kleine Akustikgitarre Das ist eine kleine Akkustik Gitarre bestehend aus einem E-Gitarrenbausatz (wie meine Little Big Guitar) Die Bridge habe ich aus Carbofil einem PETG mit Caronfasern gedruckt. Wer eine höhere Saitenlage möchte kann…
Best to insert right above the staples with which the slats are connected to the felt back layer. Place model vertically between slats, use a screwdriver to press down on felt and rotate 90 degrees, insert screw. Printed it on Bambu Lab…
Raz's Desk Acoustic Panel Frame: Designed to elevate the aesthetics of acoustic foam panels, while making mounting easier. Background: I have always loved the look and functionality of acoustic foam for my set up, it helps me get the most…
random high hex acoustic wall panel there are 20 random high
This full-size acoustic violin is an improved version of the model by MasterChief2552 that I remixed/modded according to the real violin specs from MakingTheViolin.com (original small-size model here ). Some parts are adjusted or remixed,…
I have developed an easy-to-print and reliable holder for an acoustic guitar, while not requiring a lot of material consumption. I developed it based on a picture of my guitar, the neck width is 43 mm. Two screws along the mount ensure…
My wife wanted to place some candle holders on our acoustic panels in the living room and since she couldn't decide where to put them without trying and I didn't want to damage the panels with nails or screws, I made this friction fit…
FLOW | Guitar Stand Elegant curves. Simple yet efficient. Meet FLOW, a 3D printable guitar stand. 4 versions available: for acoustic/folk guitars , in either "plain" surface or "textured" for electric guitars , also in "plain" or…
Simple mounts I made for acoustic panels and anything else of a similar shape that may need to go on a wall. The idea is you can glue the panels to the mounts, build up sections, and then use picture nails to secure them to the wall. I…
Hooks for acoustic panels with a width of 13mm and a groove depth of 10mm. The hook is self-clamping on the wooden slats.
My sister Oy needed 10 hooks for her acoustic panel, maybe one or the other can use it too. Looking forward to pictures and a like 😉 Meine Schwester Oy hat 10 Haken für Ihr Acoustic Panel gebraucht, vielleicht kann der ein oder andere es…
Installing these storage options for your acoustic panels does not require any tools. They are designed in such a way that they stay on the wall simply by the force they exert on the ribs (in my case the shelf holds at least half a…
i printed it with 0.12 layer height but you can print from 0.2 with adaptive layer for a perfect overhang and no supports. you can adapt the base hole with a simple extrusion and use it on other non Samick guitars (Should go well for…
Duplicate 4 or 6 times in slicer as necessary after setting up first bead. I use .16mm layers and just plain PLA. I seem to have more issues with the holes using silk PLA, but if you don't mind a little cleanup than try silk or other…
The hinge broke on our Bush record player. This print is a direct replacement. Works great in PLA.
Fastener insert with an M4 insert nut for acoustic wall panels with 13mm gap and height. The hex in the front is 6mm in size and makes swiveling the insert behind the strips of wood easier. Image part is printed in PA6-GF, other materials…
The Acoustic Airflow Arch: An Innovative Solution for Clear Hearing in Airflow Environments The Acoustic Airflow Arch is a meticulously designed device that seamlessly combines functionality, comfort, and acoustic clarity. Its primary…
PANO Key Box: Stylish Organization Meets Acoustic Wood Panel Design This unique key holder brings both order and elegance to your home! Inspired by popular acoustic panels, it blends modern aesthetics with practical functionality. Product…
The shadow line cutter creates perfect shadow line or reveal edges on ceiling tiles and acoustical panels. Extremely useful when having to cut down full tiles and need to recreate the drop. The design is comfortable to hold and will help…
En: Print in place positioned at front face, tested with 0.2 mm layer height in PLA+ an 25% infill Mount at the acoustic panels without glue or drill using…
For wood acoustic panel by Denpanels (available at OBI) and maybe for others brand. This 3D model makes it easy to attach shelves to the panels using an M4 nut and screw. Here’s how it works: Slide the M4 nut into the mounting bracket.…
Sturdy shelves for acoustic panels - non destructive - with cheap IKEA glass shelf. I needed some shelves for my acoustic wall panels that would not destroy the wood panels in any way. These are screwless mounted to the wall panels. The…
This is a minimalist, easy-to-print acoustic panel designed to help reduce noise and improve sound quality in your space. Perfect for home studios, offices, or any environment where sound dampening is desired. Design Features: Sleek,…
This simple acousticpanel holder with a diameter of 80 or 150mm. You don't need any screws. It's a tight fit. My panel has wooden studs that are 30mm wide and the spacing between them is 11mm.
A non destructive mount for the acoustic panel aligned for a gap with 13mm width x 10mm depth
Motivation The frame of the housing of a Takamine TK4NT acoustic guitar preamp broke, so that the preamp was no longer fixed in the guitar. I designed a replacement housing. Printing I printed the design on a i3 MK3 using PETG, layer…
This model is compatible with the lego system.
Model acoustic guitar with print in place strings. Make sure you turn on detect thin walls
Feel free to scale it as desired although if you choose a smaller size the frets and tuners might not be printed as good.
A Feedback Supressor Cover, drawn for an 98mm Soundhole. The Border is 5mm so you can calculate for any Diameter. There is a circular Groove, add the shortest ordinary Rubberband you can find and the Assemby will fit as a Glove. Works as…
Tweeter Pod for SB Acoustic SB21RDNC/SB21SDNC (25 degree angle) For SB21SDNC don't use the grill because the tweeter dome is higher Brass insert M3*4*4 Screw M3*8 Recommended print with ABS
Printed on the Bambulab P1S with ASA, so its strong. 0.2mm with supports and a raft on.
Saw the original post by @TorbenJ on Thingiverse, and wanted to make some slight changes, that all tie in together. First off, I added a small standoff onto the back of the piece. This will allow sound waves to reverb off the wall at…
Druckbare Version des Lautsprechers "Mini ACL" aus einem Bauvorschlag des acoustic-design-magazin.de Die Milchpackung kann nicht gedruckt werden und dient zum Größenvergleich :) Die Wände des Gehäuses habe ich mit 6mm konstruiert, ich…
Modeled from a Fender CC-60S acoustic guitar. Includes the first 4 frets along with raised channels for each string. Ideal for practicing chord shapes and finger dexterity exercises. Designed to be printed vertically in PLA, PETG or ABS.
A holder for the apple watch charger. You can mount it on acoustic panels like in the pictures.
Self created FreeCAD file added to make adjustments to fit your needs. Print on side (for rigidity), add supports. See my other models for threaded heat insert mounting bracket
Wall hanger for acoustic guitar, none of the models I found would accommodate my acoustic guitar, either they were too narrow or didn't project from the wall enough. If anything this is a little too long so could probably be scaled on the…
Acoustic panel mounting bracket for threaded heat insert M4x6x6. For panel size, 13mm width, 10 mm height. Adjustable. FreeCAD 1.0 model provided. Adjust to match your acoustic panel width and height. Also adjust to fit your threaded heat…
Tunnelplan Clip for a heat pump cover. The outdoor unit of the heat pump can be covert with an attractive wooden casing. It would be nice if a noise reduction could also be achieved with this. However, this requires a sound-damping…
I wanted to make the top of my printer cool, and maybe help reduce noise. Part of https://www.printables.com/model/1263333-3d-printer-enclosure-parts
For a acoustic panel with a 15mm gap between the pieces of wood. The pieces of wood are 13mm deep. For M4 melt in thread
Twist and lock style mount for acoustic panel walls, no drilling required.
My sister rescued a guitar from a trash heap in the rain one day, a Yamaha FG-335 from the 70's. Surprisingly, it was in very good condition-except that it was missing a string and a bridge pin. I printed a few bridge pins from this site…
I used the "Obi Akustikpaneele - Halter 10t,13b.stl" from @FlorianHubne_1837017 as the Plantholding plate. While I based the mounting on the original plant pot file, I had to design a custom screw and counterpart to accommodate the size…
A simple cover to hide the obnoxious blue LEDs at night on the Cyber Acoustics CA-3602 volume control unit. Print with the large flat area face down. I used the Archimedean Chords as the bottom fill pattern for a nice top finish. You may…
Work in progress - more insert types will be added, wall-friendly baseplate to follow. These Gridfinity inserts were made as a way to ad hoc add or subtract surface area in your critical listening environment. Write-up to follow:…
support may be required for some models. instructions in this video: another demo video for the version with the acoustic volume control knob.
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
A Binary acoustic diffuser plate. Pre-Print Steps: The model isn't scaled up, so you'll need to scale to model to be 40cm x 40cm As you probably don't have a 40x40 bed printer you'll need to cut the model in 4 pieces too. (just use the…
The Hovalin is a functional acoustic violin that can be produced using most standard consumer 3d printers. The total cost of raw materials for the violin (4/4) is currently about $70. The Hovalin was designed with Autodesk Fusion 360, and…
i created a simple minimalistic mount for the acoustic panels in my 3D-Printer case.
Additional parts: M4 heat-set insert 6 mm in length. Hand-cut gasket or pad to match the inside of the flat semicircular area. Hand-cut gasket or pad to match the inside flat trapezoid on the clip. I make my gaskets from corkprene, but it…
The legs were extended in a slicer to fit guitar/acoustic guitars of 83 and 90mm width.
i couldn't find any hooks for vertical acoustic panels, so i created my own. It’s screwless, put it in and twist not much to say, i printed with base plate on bed with a little support for the hook
Requirements: 2x M3*12mm bolts with cylindrical hex head (like those from the following set: https://www.amazon.com/Stainless-Steel-Socket-Screws-Assortment/dp/B01N3YT1OZ ) The first thing to do is lock two hook-roots in-between the…
English-Version: Hello everyone, After countless iterations and calculations, I present to you the BRAVO Panel (Broadband Resonance Absorption & Vibration Optimizer) – a fully 3D-printed, modular acoustic panel designed to achieve maximum…
English-Version: Hello everyone, After countless iterations and calculations, I present to you the BRAVO Panel (Broadband Resonance Absorption & Vibration Optimizer) – a fully 3D-printed, modular acoustic panel designed to achieve maximum…
English-Version: Hello everyone, After countless iterations and calculations, I present to you the BRAVO Panel (Broadband Resonance Absorption & Vibration Optimizer) – a fully 3D-printed, modular acoustic panel designed to achieve maximum…
Smaller and improved version of my other acoustic panel folding hook for panels with 13 mm wide and 10 mm deep spaces between the bars. Print in place positioned at front face, tested with 0.2 mm layer height, 0.4 mm nozzle in PLA+ and…
I really liked the original design by NickiDotDK, but it did not fit the requirements for the make of wall panel I was due to fit on my wall. With a sample of the Trepanel brand of wall panel I determined that the width needed was 13mm…
Random acoustic panel generator with tinkercad codeblock 20mm X 20mm https://www.tinkercad.com/codeblocks/6EGPUgJ1GHe-random-acoustic-panel-20x20 30mm X 30mm https://www.tinkercad.com/codeblocks/br7xGE5VM59-random-acoustic-panel-30x30…
This will securely hold a Boston Acoustics Bravo speaker in a vertical configuration. Perfect for placing surround speakers on shelfs or other surfaces. Straight-forward print, no need for supports. I forget how much infill I used,…
Simple floor stand for guitar (acoustic guitar). It’s important to note that this stand is designed for guitars with a 10 cm base/body depth. Easy print — does not require dense infill or supports. The stand may show some instability. Due…
Inspired by the “Recycled Cardboard Molding” project I found on Thingiverse. I wanted to try and make sound absorption panels using recycled materials. - I took an existing (sine wave) press and removed the pattern and then created a…
When double sided tape doesn't stick to the panel, use those. It looks like garbage on the tip, but really it works. 0.2mm 25% infill
An easy way to mount pyramid acoustic foam to a wall. I used small nails to tack each corner up. The foam panel pops right in. This one was printed in a matte black PLA to match the foam color.
Print off two for a pair of stands (Duh) PLA fine as its not exactly load bearing. I like to print it on its side 5 walls no top/bottom layers 5% honeycomb infill These will probably fit other speakers, you just need to see what the…
Description Requirements: 2x M3*12mm bolts with cylindrical hex head (like those from the following set: https://www.amazon.com/Stainless-Steel-Socket-Screws-Assortment/dp/B01N3YT1OZ ) The first thing to do is lock two hook-roots…
