Counting matching models…
These parts were designed to facilitate mounting Rev Robotics sensors (e.g., color, distance, touch) behind Gobilda and Actobotics channel or plate. This concept could also be used to flush mount them behind other surfaces like hardboard…
This part was designed to mount a standard micro switch to the Actobotics hole pattern. (12/2022 updated version includes a variation for the goBILDA pattern.) Honestly, in most cases, the off-the-shelf Actobotics part# 605627 (Limit…
This part was designed to interface common FTC shafts to a 1/2" hex bore with soft intake wheels in mind, such as AndyMark compliant wheels and Vex Flex Wheels (with VersaHub). As always, 3D printed parts are relatively soft, so this…
We needed a way to use a cheap 16mm potentiometer as an angle sensor in Actobotics channel. This design sandwiches around the potentiometer and holds it in place from one side of the channel, centered in one of the 1/2" holes. We used a…
This part was designed to interface with an Actobotics D-Hub and FTC motor (0.770" hole pattern, 6 mm D-Shaft) to spool out and retract a line for a linear slide mechanism. This part was modelled by EMK of FTC team 14273, Sense and Sound…
Available in stl (inches). Allows you to "convert" a small section of Actobotics® standard channel into square tubing. Useful for various mounting configurations. Other pieces in the examples are the Actobotics® Internal Bracket Reduced ,…
Available in stl (inches). An internal bracket designed for fastening Actobotics® standard channel together. The full version is here . NOTE: This part is not symmetrical. For some uses you will have to use the mirror function on your…
Needed bumper for single Actobotics rail. This was designed to hold a square nut. Inset rim is only partial to make room for standoff (which is used to stiffen channel for motor/wheel mount). I used CA glue to keep nut in place. Print…
Available in stl (inches). An internal bracket designed for fastening Actobotics® standard channel together. NOTE: This part is not symmetrical. For some uses you will have to use the mirror function on your slicing program. Print…
Available in stl (inches or mm). An endcap designed for Actobotics X-Rail®. Has two fastening methods. Can clamp directly to the X-Rail end (like a regular endcap). If there is not threads on the corner holes of the X-Rail one can also…
Available in stl (inches). An internal bracket designed for fastening Actobotics® standard channel together. The ⅜ version is here . Print Settings Resolution: 1/128" or 200μm Infill: 100% Filament: Any ABS Category: Robotics
Available in stl (inches). An internal bracket designed for fastening Actobotics® standard channel together. The full size version is too large to fit in the use pictured above, ergo this part was created. Print Settings Resolution:…
Front bumper for robot. Fits perfectly into 2 Actobotics beams aligned along the open sides. v2 has slightly larger screw holes. Still not quite big enough for 6-32 screws though. How I Designed This Used Fusion 360. Holes on outside…
Mount a DF Robot Romeo 2 board to Actobotics channel. Use M3 screws. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: No Notes: default settings worked fine; printed in PLA How I Designed This Used…
Available in stl (inches). An internal bracket designed for fastening Actobotics® standard channel together. Print Settings Resolution: 1/128" or 200μm Infill: 100% Filament: Any ABS Category: Robotics
Available in stl (inches only). A spacer designed for Actobotics® standard channel. Can buy an aluminum counterpart from ServoCity (SKU: 633136). Category: Robotics
Available in stl (inches or mm). An endcap designed for Actobotics X-Rail®. Has two fastening methods. Can clamp directly to the X-Rail end (like a regular endcap). If there is not threads on the corner holes of the X-Rail one can also…
An adapter for a nema 17 stepper motor to an actobotics frame. Made it to work with this stepper motor: https://www.sparkfun.com/products/9238 The motor will need 4 M3x10mm, the actobotics screws will be 6-32 x 3/8in screws, which are…
