46 models
Gundam Keychain - COD WZ Season 4 Add a touch of legendary mech action to your everyday carry with this exclusive Gundam keychain, inspired by its stunning appearance in Call of Duty Season 4. This keychain captures the iconic design and…
Print approx. €0.27–€0.32 excl. taxPreliminary estimate for one variant
The radio aerial on the Abarth/Fiat 124 Spider (and the MX5) is rather long and replacing it with a shorter/stubby aerial is a common thing to do. However, the base of the aerial mount needs to be covered. This surround is for the…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
🇬🇧 I broke the pedal of the Joie Signature Aeria stroller with my big daddy foot. The manufacturer didn't want to send me the 3D file, they naugthy ! So I remade it. If you have this stroller, I recommend making an advance pedal, as the…
Print approx. €3.03–€3.71 excl. taxPreliminary estimate for one variant
The Aeria Mechanica mini is a single axis Tourbillon model that is designed as a little companion to its larger counterpart. The mechanism can be activated by rotating either one of the gears in the system. It is intended to be a…
halos on any setting is fine. saber is better with any extruder smaller than 0.4
These have been working surprisingly well, and will be updated as better designs are tested. Please use all safety steps you would normally take when handling any firework. Test video of a 16mm and 20mm Works well with standard PLA. The…
The STL is for a 1:20 scale torpedo but can easily be resized in whichever software you use for 3D printing. I printed the main part of the torpedo in spiralize(vase) mode with adaptive layer height set to range from 0.04mm to 0.2mm in…
Radio Box for Mayako MX8E E-Buggy – includes integrated transponder mount designed for MYLaps transponders. Designed for a clean, secure install of your electronics while keeping your transponder neatly positioned and protected. Perfect…
Aerial Bomb Lamp, hanging or freestanding (My Take) Design to be printed in 2 pieces and assembled. Assembled dimensions is 19" by 6". NOTE: if this appears tiny in your slicing software, scale it up to 2540%. That should be the correct…
3D printable base to construct the bucket targets used in the NIST Engineering Laboratory Intelligent Systems Division standard drone proficiency test, Level 1-3 Open Environment. Item Vendor Qty per Target Price per Item Total Cost…
The hole is not below but behind. I modified the model for fit to The SD Aerial.
Knobs for a more comfortable grip! Drop-in replacement for the 04_Transmission_2 gears. Print using the same settings recommended by the Aeria Mechanica Mini build guide. I used the same 10 mm length pins for the original gears and have…
I needed to remove jello vibrations from aerial footage shot from my DJI Mavic Pro on an Insta360 EVO stereo cam. After some looking around I discovered RCTestFlight's superb vibration dampening system:…
I'm creating a bigger and more efficient quadcopter (for longer flying time) that can be easily disassembled (to carry). I'd like to be control from the ground station, maybe later with optical recognition by raspberry pi using opencv or…
Zeus swirled his ambrosia for a while, contemplating the furious storm he was about to unleash; putting down his chalice on the coaster, he noticed how most fitting its pattern was for the impending bolts soon to be delivered over the…
I generated this aerial view map of Truist Park and the surrounding area, such as the Battery. This makes for a very cool trinket to go on a desk, or as a gift for a Braves fan.
A tail mounted bracket for the OMPHobby M4
This kit contains models of clamp parts and handle to create a rope track (Zip Line, Aerial line) suitable for TrixTrux toy cars. You may use handles and clamps in any combination to make rope track in multiple combinations. It is…
New threadlock files for printing a good fit for Nissan Leaf ZE0 or AZE0 chassis (2012-2015?) model aerial santa hat. Original santa hat maker is a genius, this is the coolest thing ever really : )
Its a UAV, inspired by the looks of the MQ9. You can mod it however you like- the fuselage should be able to fly, you can convert it into an RC drone too. NOTE: The entire UAV does NOT fit on a 250^3 build plate, it is in parts. You have…
mounts antenna up and away from blades printed with nylon but should work with any flexible filament
An alternative solution to replacing an obsolete VW bee string aerial seal, printed in TPU. Particular attention has been made to the raised rim on the underside of the seal, which presses into the roof panel to ensure a weather-tight…
This is a stand for an indoor TV aerial that I purchased from Amazon . The thin, flat aerial is meant to stick to a window using suckers. Sadly the suckers are awful so I made this simple stand to keep the aerial upright. You will need…
I have a Codan Autotune HF Antenna mounted on the back of my 4WD. When I don't have the whip mounted, the mounting thread is exposed to potential knocks/bumps/damage. I made up this simple threaded cap to go over the mounting thread to…
I don't use my radio and didn't like the long aerial so made this to cap it off. Just note that this won't function as an actual antenna. A basic design although my print could have used smaller layers at the top to get a smoother finish.…
Changed the bottom piece of UAVPilot1's model to be printed without support. Category: Camera
This is an open backed case designed to fit over a generic 5W USB UK plug and houses an ESP32-WROOM-32U WROVER. The box is deliberately wide and has a cutout so it can sit over a UK 13A socket switch. I flashed mine with ESPHome bluetooth…
Spacer for the popular mockup aerial for the Motorola MT500 Ghostbusters film prop model. This slides over the bolt to space it out before you apply the heatshrink. This thing was made with Tinkercad. Edit it online…
Mounting bracket for rc reciever aerial mount for 3mm tube
print at max infill, no support or brim needed.
RC Aerial Tube Mount for RC models. Fits 3mm tube. Needs 1x M3 threaded insert. Printed in 1.75mm PLA at 10% infill. Make sure to use ‘support on build plate only’ or similar feature in your slicer.
So I have a friend in McGill University, who is a so called engineer but apparently who can't CAD, so I made for his glaceology lab this custom version for their new big ass thermal engine gas drone and apparently it worked. Sorry for my…
Heres my overly complex aerial flag. supposed to help reference image data. 220mmx220mm set on a 300x300
Designed a simple replacement aerial for my RC controller. Printed with bed supports due to the design. I also printed with additional permiters /100% infill for the base element and used a support blocker for the inner hole. I have…
Hierbei handelt es sich um eine Halterung für einen Aerial- / Turn- oder auch Akrobatik-Ring. Die beiden Halterungen werden im Abstand von ca. 15cm nebeneinander montiert. Sie sind so geformt, dass sie den Ring perfekt mit dem…
modelo desarrollado de mi autoría para organizar mi están de baterías
I use this guide to keep cables together and to free up space on tables or shelves.I use this guide to keep cables together and to free up space on tables or shelves.
Fully ready to play - just 'WIP' as we keep tweaking the rules. Video here! Note: I've included all parts as separate files, but the 'plate' files show you the recommended print orientation 'Hardware' needed: 7x normal d6 dice for each…
Allows to fix a Aerial to a location which is normally off limits due to the building being a grade 1 listed building. things you need: nut and bolt 2 cable ties
Free 1:200 version of a working transporter bridge (aerial ferry): two truss towers carry a long girder, and a gondola hangs from a trolley that rolls across the span. A hand crank turns a 12-tooth pinion on a rack under the girder (about…
This decorative bookmark is a tall, narrow pointed-arch piece resembling a lancet window or elongated gem, with a gold outer border. Its layered, cut-paper-style design shows two masked aerialists embracing, one with long flowing red hair…
Hierbei handelt es sich um eine Halterung für einen Aerial- / Turn- oder auch Akrobatik-Ring. Die beiden Halterungen werden im Abstand von ca. 15cm nebeneinander montiert. Sie sind so geformt, dass sie den Ring perfekt mit dem…
3D printable base to construct the bucket targets used in the NIST Engineering Laboratory Intelligent Systems Division standard drone proficiency test, Level 1-3 Open Environment. Item Vendor Qty per Target Price per Item Total Cost…
Fully ready to play - just 'WIP' as we keep tweaking the rules. Video here! Note: I've included all parts as separate files, but the 'plate' files show you the recommended print orientation 'Hardware' needed: 7x normal d6 dice for each…
modelo desarrollado de mi autoría para organizar mi están de baterías
