Counting matching models…
(if you have printed this earlier, as of 12/27/22 there is an entire new version out!) Mini-IFU (v2) Print There are 2 versions of the “Connector_Bottom” you can print (you only need one!). _v2 requires the additional…
Replacement dust cover for the EXT Bus on the rear of the white PCEngine, CoreGrafx and SuperGrafx console. Those pins have a tendency over time to develop corrosion, so keeping them protected is important. If you don't have the ability…
Proudly display your 8Bitdo PCE 2.4G Wireless Gamepad for PC Engine Mini, PC Engine CoreGrafx Mini, TurboGrafx-16 Mini & Nintendo Switch controller with this display stand. A single and double display are both available. Purchase: Also…
I needed a case for one of my Games that didn't originally come with a case. So I started looking into 3D print options. I found the one that is linked here. I liked it the best for what I was looking for and overall design. I wanted a…
full 1:1 scale shell replacement for your CoreGrafx (PC Engine)
full 1:1 scale shell replacement for your CoreGrafx 2 (PC Engine)
Another remix of the excellent Rugged Box this time for storing up to 20 loose HuCard / TurboChip games in their vinyl sleeves. I have included 2 lids so you can print PC Engine style or TurboGrafx 16 style boxes in multi-color glory. You…
Short support for AFX HO Scale Slot Car track from the AFX Giant Raceway Race Set w/Tri-power Pack. Instructions My son broke one of his short supports for his AFX Race Track so a replacement part was needed. This works great. Print both…
Yet another housing for yet another commonly available RGB AV Booster for PC Engine and TurboGrafx 16 systems (also CoreGrafx, CoreGrafx II, and SuperGrafx). This booster variant has composite, component, and MD2 (MegaDrive 2)…
This replaces the inner tray of a standard CD Jewel case so it can hold PC Engine / TurboGrafx HuCards. Print Settings Printer: Raise 3D N2 Rafts: Yes Supports: Yes Infill: 10% Category: Video Games
This replaces the entire inner and lower parts of a CD Jewel case (only using the lid or the original case) to house PC Engine / TurboGrafx HuCards. This style is closer to the original way NEC packaged games, but it doesn't allow reverse…
The TG16 is a really wide console and takes up a ton of real estate having it out. So this vertical stand can save you some space. Designed to be used without the rear expansion cover in place. Want to get creative? If you have a…
Designed for a local AFX enthusiast, this holder keeps the controller off the race track when not in use. Ideal for the older type of controller. Can be printed with or without supports depending on your set up. Print Settings Printer…
print at layer height .15 PETG or ABS
This is a display stand for any media in Switch game cases, DS and 3DS game cases, DVD cases (PS2, GameCube, Xbox, Xbox 360, movies, etc.), CD jewel cases (single CD PS1, Dreamcast, Turbografx 16/PC Engine, etc.), Bluray cases (PS3, Xbox…
I grew up with a TurboGrafx and really wanted a sign I could proudly hang in my office, so to the few of you out there that feel the same way, enjoy! Materials needed: Hot Glue LED strip of your choosing, trimmed to fit Screws…
just print it ;-) Add an additional Design with only 15 degree elevation.
Do you use a TurboGrafx system with an plug-in expansion port AV booster? If you do and it doesn't have a built method for pin alignment then you need this! This adapter/guide goes over the expansion bus female pin header end provides the…
UPDATED: 2024-FEB. I added an additional adapter sleeve that allows for safer use on TurboGrafx-16 consoles. The stock 69 pin header can bend pins when installing or removing if you are not careful, so the adding the adapter sleeve will…
Made a support base that can house 2 wireless controllers (maybe wired as well, but not tested), Robert's USB2PCE adapter, and USB TurboTap. There's enough support to hold the SSDS3 as well and won't tip. Requires 4 - M3x8 machine screws…
A replacement switch plate for the TruboGrafx 16. It operates and feels just about identically to the original (see photos). Easy printing with no supports, 2 color ready. Print the plate face down and the switch with the slot side down.…
This mount has had the angle adjusted to 20 degrees, beefed up lens guard, fixed some pain-points where the mount would break under heavy abuse, and slightly optimized. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts:…
The front and back shell are printed with PLA at a resolution of 0.2 with supports. Here's a list of parts used if you want to source them yourself: TurboGrafx-16 Mini system - these are out of print but can be found on 2nd hand markets.…
This is for 13mm markers only, if you are trying to use pens, you need the other design I have coming. Print with the shell order outer to inner, and when it's done, spray some orange spray paint on a sponge, and daub onto the logo. Paint…
A little bit of background on this module: I wanted to get RGB out of my TurboGrafx 16 but didn't want to plug an attachment (like the db GrafxBooster) behind the console. I wanted to use Voultar great RGB kit and ended up adding few more…
A vertical stand for the Core Grafx, which is probably also compatible with the Core Grafx II and the standard PC Engine. The height is raised so that it should be possible to actually use the console in the vertical position when the…
This is a Turbo Grafx 16 Hucard holder, it holds 10 cards. Printed on a Bambu Lab X1C
Gasket for making TerraOnion SSDS3 taller to fit onto a TurboGrafx Print with no support. The H-shape piece goes under the PCB. You may want to fix it by driving some of the screws from the top side just to make it less fiddly while you…
This is a small Genesis/Mega Drive/Sega Master System game clamshell case display stand. I had trouble finding one so I set out to design one that uses the least amount of filament and time. You won't find a smaller one. It only has a lip…
I purchased a Turbo Grafx 16 RGB adapter from eBay and none of the cases looked how I wanted them too, so I remixed this together. Needs supports for the overhangs. You should modify the slicer to user just 1 perimeter for the first layer…
These wallmounts are for the AvenuePad3 controller and the controller Multiplexor for the PC Engine / Core GrafX. It may be compatible with other AvenuePads but that has not been tested. See my design list for wallmounts for other…
just print it ;-) Add an additional Design with only 15 degree elevation.
These wallmounts are for the AvenuePad3 controller and the controller Multiplexor for the PC Engine / Core GrafX. It may be compatible with other AvenuePads but that has not been tested. See my design list for wallmounts for other…
Proudly display your 8Bitdo PCE 2.4G Wireless Gamepad for PC Engine Mini, PC Engine CoreGrafx Mini, TurboGrafx-16 Mini & Nintendo Switch controller with this display stand. A single and double display are both available. Purchase: Also…
Designed this GoPro Session mount for the BQE 5AFX with Basher United (see link below) Be sure to check his channel out and subscribe to see this print in use :) https://www.youtube.com/user/BASHERSUNITED Message me if you'd like one…
The BAFX system allows you to take an IR signal from a remote and feed it to another room or remote location. This will work perfectly for my home theater which has the equipment in a nearby utility room. The sensor that detects the…
Very minimal SMA mount for the botafx banger that leaves room for the XT60 lead to come out the back. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 25 Filament:…
This model is a car body for for AFX SRT slot cars. Printed in PLA mine works great, supports are needed for the front hood when printed upside down . If there are future revisions to this model, I'll make it look a little nicer. Known to…
