Counting matching models…
I've encoperated most of the face into the mask which I think gives it a much meaner appearence. Still it is an untested print and sizing and fitting correctly may be a whole different thing. Print instructions Category: 3D Printing
Here is Noob Saibot Mortal Kombat Mask. There are just 2 options. Print instructions Category: 3D Printing
All I have done is thicken the shells and smooth and sharpen it as best I could to make it a plausable/ likely print! Here is the Helmet as requested as a pep file, but generated in its most raw PDO format. ( Yes I can generate any file…
I printed the figure using standard support structures. However, I think it would work even better with a tree structure.
UPDATE 11/6/2024 - Added island board overlays These are overlays designed to fit the player boards and three island boards (Emerald, Gold, and Pearl) for the game Pirates of Maracaibo . These are designed to fit snugly over the boards to…
This is an organizer for the game Maracaibo, including the expansion "The Uprising". There is enough room for sleeved cards, even for premium sleeved cards. With premium sleeved cards it's tight, but it works! The player boards of the…
This small castle is designed to improve the visibility of the castle token in Pirates of Maracaibo: Commanders expansion. With compact dimensions of 20 × 20 × 13 mm , it prints quickly and uses minimal material (around 2 grams), making…
Ich habe dieses modell als Übung konstruiert
This is an insert designed to fit the retail edition of the game Pirates of Maracaibo and supports premium sleeves. It also supports the player board and island overlays I have designed and posted here . The boxes with lids print best at…
I can't believe how tiny the player markers are in Pirates of Maracaibo. IT's super hard to see them when placed on cards, and super easy to lose them. So I created these which simply press together with a little friction. Solves both of…
NOOB SAIBOT CHARACTER FROM MORTAL KOMBAT FOR FANS OF THE MORTAL KOMBAT SAGA
Player Components box needs to be printed 4 times. I have included an additional spacer in case you need to store the game vertically. The bottom spacer must be printed in two copies. If you like my work, please consider making a paypal…
Just some remixed parts for the 1:1 portal radio made by Alex I on my mini factory, which I made easier to print on Ender 3pro, as well as a hole in the back for cords and a holder under the button hole for a clicky keyboard button.…
Upgrade the player board cubes to cannons instead. For the commanders expansion I just used black instead of grey for the cannons.
Replacement wing for Haiboxing 1/18th scale rc car, truck thing
Dolores Claiborne - 1995 3D printable model. Super easy to print. This is a large model and will take a long time and a lot of material to print.
Castlevania Gaibon. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Creatures
Silfire made a great insert for the Maracaibo board game by Alexander Pfister: https://www.printables.com/model/904076-maracaibo-expansion-organizerinsert If you print the Nations tray in blue/red/white, you can put them directly on the…
These ears hold up well over time. and are inspired by the 110 shape. The counterbored ear hole requires support material but nowhere else does.
My Aibo ERS-210 was missing one of its paw pads. I made this one in Tinkercad and its not perfect but it works. Print Settings Printer Brand: Bambulabs Printer: Bambu X1C Rafts: No Supports: Yes Resolution: .16mm Infill: 15% Filament:…
sand the interlocking parts (commercial use is allowed) Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: 3D Printing
Recommended print settings PETG Nozzle: 0.4 Layers: 0.15 Infill: between 100% Perimeters: 3 Bottom/Top Layers: 5 SUPPORTS NEEDED Like the design? Please leave a “like” …. ❤ ….. Feel free to follow me …. ✅ ….. I am glad about every make…
This is for folks with the double-layer player boards that come with Maracaibo: Uprising. There may be some other way to get them. Tired of having your stacked boat discs go flying any time you bump your boat, fat-finger picking a token…
This is a replacement antenna for the Sony AIBO ERS 220/ 220a. The antenna is push fit. Print with supports ‘on build plate’ I recommend using a textured build plate so both sides look the same. Or use a smooth build plate and use the…
This insert allows very faster setup, vertical storage and supports sleeves (I personnaly use Paladin sleeves). It can contains the core game, its two expansions (Commanders & Bermuda Triangle) and the New Figureheads promo. No lid lift.…
My Son is a lefty, and wished that there was a left handed transmitter for his RC basher (that wasn't hundreds of dollars), so here it is! Original steering will mount just as it does on the original side. Printed in PETG with supports.…
I printed in BBL @ 0.2 with a higher infill and walls for strength. Also I added an extrusion to the underside so the panel doesn't flex.
This model if for resale, you are allowed to sell it if you like, you do not have to pay me to sell these, You just have to give a link to this or give credit to me if you want to sell this item. aibo 210 ear clip you have to print it so…
Reproduction for the GoGo Marine claws. Based on the original Japanese toy DX by Bandai. Made to be printed in resin. Not compatible with the Power Ranger version of the toy.
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/1RAte8H373A
I made this for fun.
I wanted to do a 3s conversion on my Haiboxing 2997a. You will have to relocate your ESC but it is easy on this buggy. I fit a 2600mAh Gens Ace 45c battery with a deans connector. This is the absolute maximum battery size for this buggy…
My (german) Version has bigger Player Parts and ticker Tiles so I made some Changes. You still need the orginal files from the Orginal Insert. More Spaces for Tiles on Player and Dice and Treasure Part More Space for Player Ship, Explorer…
Silfire made a great insert for the Maracaibo board game by Alexander Pfister: https://www.printables.com/model/904076-maracaibo-expansion-organizerinsert If you print the Nations tray in blue/red/white, you can put them directly on the…
This is an organizer for the game Maracaibo, including the expansion "The Uprising". There is enough room for sleeved cards, even for premium sleeved cards. With premium sleeved cards it's tight, but it works! The player boards of the…
Organizing insert for Maracaibo board game by Super Meeple. Allows to hold and organize the game and The Uprising expansion in the game box. Ready to play: quick setup thanks to component containers designed for in-game use and individual…
Real Size Noob Saibot Mortal Kombat 1 mask. The scale is approximate, so please measure your face and scale it to your liking in your slicer. Thanks for stopping by :) No comercial use. Personal use ONLY Link to Patreon :)…
![aibfrisbee [Frisbee for aibo ers-7 and for aibo ers-1000]](https://media.printables.com/media/prints/1101019/images/8321162_82eeef19-2987-4fa2-a414-c329ea37abb0_1e441d2a-e158-48f6-86c2-0703569d7b5d/medium_preview_bone_on_both_sides.png)
