51 models
AudioHardwareChildProtection :-) Easy mount with the original screws Printed without infill! CAD:…
Print approx. €2.87–€3.50 excl. taxPreliminary estimate for one variant
The professionally designed travel/storage case for the Henson AL13 safety razor is a sleek and innovative solution for safely transporting and storing your razor and blades. Designed with precision and attention to detail, this…
Wall mount bracket for the Bosch 18V charger model AL1830CV. Print it on its side to ensure it is more flexible and durable. PETG is better for this use case, but PLA should be good enough.
Simple blade guard that slips over your Henson AL13 safety razor so you can throw it in you dopp kit (toiletry bag) without worrying about inadvertently cutting things or damaging the blade. There are drain holes in the bottom to keep…
A simple stand for the Henson Shaving AL13 safety razor with a spot for a pack of blades and a sharps disposal box; which can be found here: https://www.printables.com/model/779604-safety-razor-blades-sharps-disposal-box I will probably…
I didn't have a travel case for my AL13, and there were only some around that I weren't fully happy with, so I thought, Why not design and print one myself :D ? This model is print-in-place, as I wanted to try it to improve my skills.…
Phone-animated portal for tabletop RPGs and six different portal's animations !!! Large parts to print, requires a printer with sufficient working area dimensions. Fits butt into my 3D printer with dimensions of 130x80x165 mm. But it is…
The Henson AL13 is a great razor, but it does not come with any kind of protective cover. The blade remains exposed, so can easily be damaged when stored, especially in a bag with other toiletries. Similarly, leaving the blade exposed…
LIAN LI UNI FAN AL120 Cover for hiding dasy chain mechanism. One with chamfer, one without.
This allows you to mount a Bosch AL1830 charger (and possibly other AL series ones such as the AL1815 or the AL1880) to a wall with the ability to quickly remove it when needed elsewhere. It makes use of a simple dove tail sliding…
Easy and quick to print. These two parts allow the battery charger to be fixed vertically. It is best to print with supports. It is necessary to put slightly longer screws (3x25). I printed it with PLA.
Razor holder for my Henson AL13. I attached it to my mirror cabinet with double faced adhesive tape. Works for handles with a diameter up to 11mm. For the source-file see…
STL that is uploaded does not include the initials. I only added those to customize my stand.
Motor: XD775 24V (RUN THIS SIREN ON 12 VOLTS ) I used this one: https://www.amazon.com/dp/B08DG2KXZB?ref=ppx_yo2ov_dt_b_fed_asin_title 2X M4x12 machine screws (mount motor to stator)…
A well designed, durable, compact travel case worthy of protecting and carrying your Henson Shaving Razor AL13. Carries one AL13 shaving razor without having to dismantle the razor. Carries up to two boxes of razor blades The razor can be…
since the grether's tin box has a thick top border, insert the spacers and afterwards the inlay itself, this way there is no need to bend the tin box. [edit]RK razor blades have slightly larger packaging so i uploaded a version with a…
IO shield for the ASRock Fatal1ty AB350 Gaming-ITX/ac board. Update 20260114: reported to fit the Fatal1ty B450 ITX aswell
Sur inspiration de gloda et Andy Forsberg , un redesign pour le AL1820cv. Fixation murale pour chargeur Bosch AL1820cv Impression en PLA en 0,2mm sans support
Played around with surface textures, printed at 0.05 ultradetail and 100% infill to test out settings. Organic support.
This is a remix of the blank IO shield from geerlingguy for the AsRock Fatal1ty Z170 Gaming K4/D3, since mine didn't come with one. Since I found the original to move around a lot, I also added some intentionally slightly oversized small…
I printed that from PLA on side, like author said, it is better for flexibility, when you putting in the charger.
Recommended to print in PETG. Print on side. No supports needed.
Quickly modelled this up to safely hold my razor and to travel with it (and blades). Features: The base and lid are the same piece just flipped with a snap together fit. Holds the assembled razor and 5-6 razor blades (in their wrapping -…
Subaru Forester SJ Cover Catcher Subaru OEM PNs: 94053AL100; 94053FJ000 Print inclined with organic supports, using the print post in the model itself. This reduces supports and keeps visible surfaces clean of support remains. Print post…
Very simple brackets for mounting a Bosch DIY tool charger AL1830CV on the wall (DIY chargers don’t have the wall mounting feature as the professional tool chargers). It uses only the 4 standard enclosure screws, no modification of…
Bosch Charger AL1830CV SKADIS Mount with T Clip system
Printed on Prusa Mk3S+ with MMU2. 0.15mm layer height, 3 perimeters, 15% Grid infill, automatic organic supports on base only. 1 hour 44 min print. Suction cups in photo connectors have a 15mm dia outer flange with a 9mm dia by 2.5mm high…
My little addition to the #E3DBuggy!, introducing, #Royal1!
This is a travel case for the Henson AL13 razor. The diameter of the bayonet container is designed to fit the head of the razor. A spacer that fits the razor handle is needed for the container base. This case allows storage of the razor…
Stand for an Henson AL13 Razor, inspired strongly by Henson's stand. They arms are sized to the handle of the AL13 Razor. There is a cutout on the bottom for a rubber pad and a second cutout inside to allow the addition of a weight mid…
An ergonomic wall holder for the Henson Shaving Razor AL13 which holds the shaving razor at a perfect 5° angle. Easy to grab the shaving razor off the holder, and easy to place it back. Printed mine in PETG, and mounted using 3M mounting…
There were a couple minimal holders out there for the AL-13, but they had the following issues IMHO: contact with blade: the blades were not protected from the sides. Sure, it's plastic … but the point is to be “razor sharp”, lets not rub…
Compatibility: LED corner profile SmartBuy [SBL-Al16x16] 5.5x2.1mm DC Power Socket Category: Electronics
Inspired by the version of Zerreth, I made a remix of the original from Saberlod as a splitted version. Also made the walls thinner to let it print faster.
I wanted a razor stand for my AL13 safety razor that was a bit more fun and thought the Gandalf model made by Erenirga - Gandalf Cartoon Figure ( https://www.thingiverse.com/thing:6236884 ) was perfect for this. All credit goes to this…
I did youtube videos and a Web page to give more informations on how to print it and to modify it with FreeCAD. Links : https://www.gisinb.ch/yt/impression3d/portal/portal.html and : and :
This simple print makes it easy to get a full cover around the Henson AL13 shaver's blade while allowing you to grip the tip firmly and twist the handle when changing the blades. Sliced my finger tips once badly enough to need stitches…
This is a custom-designed counter stand for the Henson Razor AL13 that holds it securely at an angle without hanging. I designed it as a two-piece system: the stand face has a female connector, and the base has a male connector. I…
I made these adapter plates so that I could fit my Runcam Split 2 inside my Realacc Real1 frame. I made it so that I could use the original frame holder and slide. In order to use it you need the small hex-nuts that come with Runcam…
I designed this to securely hold my shaver on the wall. It features two mounting holes for drywall screws, or any fasteners you prefer. Alternatively, the large flat surface is perfect for double-sided adhesive if that’s more your style.
This design is licensed under CC BY-NC . However, specific restrictions apply: Limited Remix Allowed: A limited remix of the top surface is permitted under specific restrictions. No modifications are allowed beyond the surface pattern of…
The model can be printed with a FDM filament printer or a SLA resin printer, and used as is or subsequently used for sand casting the stand in metal (shown in brass), since it includes all the necessary draft angles. Source code (.stp &…
First item I have ever created with 3D printing for my hobby. Made with TinkerCAD. Basic parts tray for the pit table in the R/C industry.
John Deere Recirculation Air Grille Inlet AL114101
Motor: XD775 24V (RUN THIS SIREN ON 12 VOLTS ) I used this one: https://www.amazon.com/dp/B08DG2KXZB?ref=ppx_yo2ov_dt_b_fed_asin_title 2X M4x12 machine screws (mount motor to stator)…
I wanted a razor stand for my AL13 safety razor that was a bit more fun and thought the Gandalf model made by Erenirga - Gandalf Cartoon Figure ( https://www.thingiverse.com/thing:6236884 ) was perfect for this. All credit goes to this…
A well designed, durable, compact travel case worthy of protecting and carrying your Henson Shaving Razor AL13. Carries one AL13 shaving razor without having to dismantle the razor. Carries up to two boxes of razor blades The razor can be…
1 Shot Magazine for Kalibrgun Cricket 2 Smooth Cal177
ABit Fatal1ty AA8XE motherboard implements the OTES cooling system and uses a duct to draw air from the CPU heatsink through the VRM heatsinks and exhaust out the IO bracket. This duct was missing on my motherboard so I created this rough…
Print one front and one back bracket. Check for the correct orientation, and mount the back first (it holds the charger in place). Mount the front bracket for additional stability. I printed in PETG, 0.2mm, with no supports.
