456 models
Water filter Sawyer to Nalgene Bottle and Helikon Bottle - Universal Filter Adapter. Inspered by hweat model. Modelet a
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant
Battle of The AI Generated Algonquin Windego. Models received the same prompt, the same cleanup, and the relatively same amount of subdivision, displacement, and decimation in blender. They all needed a second fix in Ms3dbuilder, For…
Print approx. €13.01–€15.90 excl. taxPreliminary estimate for one variant
Print in colorFabb_XT Clear , which is FDA food contact compliant. Avoid using other liquids than water, this is to reduce exposure to bacteria.
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET
I like a Nalgene bottle for around town and at work, they’re a convenient size for iced tea especially. But I don’t love the cap attached and flopping around while I’m drinking. This little loop zip ties securely to your Nalgene to give…
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for PETGSource material: PET
Würth ALG 18V Holder Introducing the Würth ALG 18V Holder, featuring our new and improved twisting fasteners for effortless installation on the Würth Perforated Plate System . This holder is designed to provide secure and organized…
Print approx. €7.06–€8.63 excl. taxPreliminary estimate for PETGSource material: PET
This is a display model of Staurastrum longipes (Nordst.) Teiling, a common freshwater green alga. As part of the order Desmidiales, this single-celled phytoplankton consists of two distinct hemispheres (semicells), connected by a…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
I got myself a new Nalgene water bottle a little while ago, and decided I wanted to try making a handle for it. This is the result! It holds the bottle securely but not so tightly that it scratches the bottle. It was a fun model to draw…
Print approx. €7.62–€9.32 excl. taxPreliminary estimate for one variant
Podpěry nejsou moje silná stránka. Vhodnou orientací na tiskové podložce se dá určitě dosáhnout lepšího výsledku než je vidět na fotkách. Já použil límec, podpěry na podložce, výplň gyroid 10%. Materiál PLA od Nebula v barvě lollipop pink.
Print approx. €3.04–€3.71 excl. taxPreliminary estimate for one variant
Made to fit snuggly so that it doesn't wobble. I also added some foam tape on the outside for even better fit. Confirmed fits 2015 Camry and 2019 Kia Sorento but should fit most 3.2 inch car cup holder. Probably should use filament with…
Bike holder for the 32oz Nalgene Waterbottle. Will also suit other bottles of a similar diameter (92mm). Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 30% Notes: Printer…
I designed this adaptor for the cupholder in my 2018 F150 to hold either my 14oz Yeti Rambler or 32oz Nalgene bottle to keep them from sliding around the truck. Should fit 2015-2020 Ford F150's and also confirmed to fit in the 2021 Ram…
I designed this sipper after a downloaded model resulted in an in proper seal. Also it was printed with overhang which required support and was less hygienic due to the imperfections on the supported surface. So I designed this model with…
Alghouls are ghouls which had been devouring corpses for so many years that human flesh becomes irresistible and they begin to prey on the living. They are seen in crypts and on battlefields, frequently surrounded by ghouls. Simple folk…
Please share a Like and Follow Me! If you remix my model please include the following in description: Author: Mr.Jib Link to author: https://www.printables.com/@Jib_88963 Title: Squid Game Dalgona Cutters Source:…
One of our Nalgene lids lost in a heated altercation with our dishwasher. This is a clean-sheet design that functions and seals much like the original. I printed this cap with the opening down and with supports (manual set) under the…
What is Algoloop? AlgoLoop is a new fidget toy invented by Japanese mathematician & artist, Yosuke Ikeda. Simple Mechanism, Infinite Possibility The basic structure is very simple. By moving a tube up and down, a ball inside is propelled…
Bike holder for the 1L (32oz) Nalgene water bottles for offroad use. The holder is out of one piece but the top of the holder is a clip which protect your bottle against falling out. In the back of the holder are many slotted holes which…
Alghouls are ghouls which had been devouring corpses for so many years that human flesh becomes irresistible and they begin to prey on the living. They are seen in crypts and on battlefields, frequently surrounded by ghouls. Simple folk…
Hi Folkard, Hopefully this is more to your satisfaction ; ) Cheers Jace
Dieses Modell ist ein funktionstüchtiges (!) Differentialgetriebe. Es lässt sich einfach drucken und auch zusammensetzen. Benötigt werden nur 2 Stck. M3X20mm Schrauben. Das Getriebe ist mit ausreichendem Spiel konstruiert und einfach…
Insert for Tesla Model 3 center console cup holder to hold a 32 oz. Nalgene bottle. The model is slightly tapered from the bottom to the top to fit snugly inside the cup holder and the Nalgene bottle is a snug (but not tight) fit. The…
Here's my interpretation of the Frosthaven monster, the Algox Guard! The best image that I was able to find of the official artwork is incredibly low resolution, so I took some artistic liberties with this one. I decided that it would be…
This car cup holder is ideal for large Nalgene 32 oz water bottles. It should fit most “standard” cup holders in vehicles. I tried several designs, and many of them were too fragile and broke easily. This one really holds up! I remixed…
This is Darth Malgus's lightsaber first appearing in the StarWars: The Old Republic game. I based this design off of a few images online, and some Old republic trailers. This hilt is a behemoth coming in at around 15" (380mm) long and…
Hi everyone - here's my first Frosthaven model! I've always loved the Inox, so it's no surprise that I also love the Algox. So, here's my printable proxy model for the Algox Archer; maybe we can get these things all built out before the…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
A 3D STL of Ikalgo from the Hunter X Hunter anime. This model was made in Blender. It stands 100mm tall (Although you can size it to your liking). I had great results printing it on an mSLA printer (SL1).
Description Trafalgar Law Logo Keychain 3D Model A detailed model for One Piece fans. Meticulously Crafted Carefully designed with precision. Show Your Passion Carry a piece of the One Piece world. Download Today Add style to your…
I love Nalgene bottles the most. They don't have a weird plastic taste; they are easy to clean and they show how many ounces or milliliters of water you have (which is great for cooking when camping). But there looks to be no water bottle…
I wanted to be able to put my 32oz Nalgene bottle into the cupholder of my 2015 Hyundai Sonata so I designed this OpenSCAD to create an adapter for my vehicle. Hopefully others can use it to create files for their own vehicles or…
A Darth Malgus miniature suitable for tabletop gaming. Print instructions Category: Sculptures
Hii, this is a remix for ender 3 direct drive , it is fit to dual gear extruder, with measure 13 mm (main pic). In addition i attached pic of the specific extruder. I attached pics from the CAD software but i printed this part, used it…
Darth Malgus parts for your Savi's Workshop lightsaber. Category: Props
Here's my proxy model for the Algox Priest monster from Frosthaven! This is a remix of my Archer model, done up to be nice and shamany =) As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my…
Squid Game 2 Nightmare Dalgona can be use as a keychain or gift Made with Illustrator and Fusion 360 Print setting : 0.2 layer height 1 perimeter Can be down/up scaled in X/Y axis. Print slow the first layer and be sure to have a bed…
Here's my proxy model for the Frosthaven monster, the Algox Icespeaker! This guy needs a fair amount of support, especially under the axes. Make sure that you also get his upper fangs and a bit of his right horn! As always, the .blend…
Ensures that no more liquid than necessary comes out of the conveniently fillable wide-neck bottles.
Just a simple Nalgene Cap for shower, just need to put a straw or aquarium tube on it for escape air outside the bottle.
Here's my interpretation of the Frosthaven monster, the Algox Scout! I had a lot of fun making this one, especially figuring out the pose. I wanted to try and capture him just after launching an attack from his sling, and I think that the…
Cup holder upgrade for my 1997 Honda Civic DX Hatchback. Now fits 20oz tall coffee cups and 1L Nalgene bottles. Unsure what other civic models this might fit, but if I can figure it out, so can you. Make sure to use PETG so it doesn't…
I made this Kaalgrontiid back in 2019, to try out my resin 3D printer. It is a dragon from The Elder Scrolls Online Elsweyr chapter.
I designed and printed a new lid after the dishwasher melted the original lid. The first time it screws on, it may be tight. Don't over tighten, it may crack.
Passend für Bestway Steel-Frame-Pools mit einem ovalen Stangenmaß von 47x32. Druckbar in PETG mit Support. Schichthöhe von 0.20mm ausreichend 3-4 Perimeterschichten Ferner benötigt man noch: 5x M8 Schrauben in geeigneter Länge 4x M8…
Rotating medicine/pill bottle rack sized to accommodate standard sized Walgreen's containers. As with the original model this is based on, it includes a rotating Lazy-Susan style base with a forceps storage slot in knob at the top. Base…
I designed this cup holder to fit in the gap between the couch cushions. on my couch it even fits between the cushion and the arm rest.
In school we made the Nostalgie-Truck out of Iron. I diceded to 3D-print it. The original one is this: https://www.christiani.de/ausbildung/metall/ausbildungsinhalte/projektarbeit/3-lehrjahr/projektarbeit-nostalgie-truck.html I designed…
32oz/48oz & 16oz Nalgene Wide-Mouth Water Bottle replacement Lids I've been using Nalgene water bottles for years for the tea I drink at work, and the coffee I drink after lunch, and I've never been super happy with the lids. the tether…
Here's my take on the Frosthaven monster, the Algox Snowspeaker! The artwork for this guy has him looming up like a genie from a swirl of snow, so I decided to really lean into that image with my model. I hope you enjoy it! As always, the…
What’s up, Doc? Bring some classic 90s vibes to your workspace with this cool, relaxed rabbit. He’s leaning on a crate, carrot in hand, and full of personality. It’s a fun, nostalgic print that’s easy to assemble and even more fun to…
Hey everyone - here's my model for the Frosthaven Algox boss! I'll avoid saying too much about the model in order to avoid any potential spoilers, but I just want to give some quick printing advice: make sure that there's some support…
Carabiner Ring Attachment for Nalgene Water Bottles – PLA/PETG/Nylon Version A practical 3D-printed carabiner ring designed to secure a Nalgene water bottle to backpacks, gear loops, or climbing packs. Material Performance: This model…
Cup holder that holds a 1L Nalgene to your SUP (Stand up Paddle Board) using the Bunge straps.
This ring will allow you to attach your water bottle to anything you can get a carabiner around without the slightest worry of breaking your Nalgene's cap strap. Perfect for backpackers, adventurers or anyone who wants a crazy helpful…
I looked but could not find a pill bottle rack that fits the small prescription bottles I get from Walgreens (~32mm OD bottles). I designed this rack for 5 bottles to screw in on the bottom (cap has threads) and 5 bottles to sit into…
Print on TPU and fit on your bottle. You will need to remove the old loop without damaging the lid. I updated the model, and the V2 version provides a tighter fit on the lid.
Remember Blockbuster Video? I'd ride my bike there weekly to get NES games or rent a VHS with friends, and I miss those days… Well, now you can re-live those days with a 3D printed membership card of your own! Might be cool to remix into…
02-26-2025 - Updated Plate to improve fitment 2 Piece Aquarium Algae Feeder. Great to keep your Triggers, Tangs, Angels, and many other marine fish happy in your tank. Simply open and place dried seaweed on screen and secure backing plate…
MetalGreymon Digimon Creature Model
Support me on Patreon! https://www.patreon.com/PrintedEncounter
This is a model of the Calgary Tower. Simplified and optimized for 3D printing without supports. Print Settings Printer Brand: RepRap Printer: Prusa i3 PLUS Rafts: Yes Supports: No Resolution: 200 Infill: 22% Notes: It's a good idea to…
The cupholders in the center console on the 2022 Audi A3 are too narrow for a wide water bottle like a Nalgene. This is an adapter that inserts into the cupholder and has a wide mouth to hold a Nalgene bottle. I like having a full Nalgene…
Set of Algebra Tiles true to the size of the commercial product Printed with 2 color changes. At .20mm layer height the color change was done at .60mm and 2.60 mm Printed with a brim since the small tiles were having adhesion issues. Some…
Replacement cap and strap for Nalgene Titan narrow mouth water bottles. Cap: PETG, supports generally not needed Strap: TPU, easy print Fits tight and hasn't leaked on me yet. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts:…
Here's my take on the Algox Icefist! At least, I'm guessing that's the right name for this guy, as the artwork's been posted, and the list of monster names has been posted... but I haven't actually been able to find anything definitively…
The original model is great except for where it actually bolts on the bike. I don't know about your bike but mine is made out of round tubes with little inserts in the tube to screw into. The flat surface that the original model has where…
Super sweet chameleon Super sweet "what's up" chameleon on a standing platform. I just fell in love with it - and couldn't find it here... So I had to upload it Summary on Thingiverse: Summary This is the Algix 3D mascot. It is a Panther…
I built off of @corbul0's model to repurpose it for drink containers which are more useful for me: nalgene bottles and cycling water bottles. Nalgene's just sorta flop over in the OEM cupholder as the cupholder base is too small, and I…
Autodromo Internacional do Algarve, Portimao, Portugal, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts…
Printed in petg, .15 layer height, 35% infill, 4 shell perimiters. Vertical protrusions can be trimmed down with a razor blade to accommodate cup holder size to your liking.
I took some time to re-create the Calgary Flames NLH Hockey teams' logo, starting from a greyscale image, and extracted the curves to extrude this logo. I don't like placing vertices manually, so I used Blender to generate a mesh from a…
Die beiden “ klassischen ” Ampelmännchen sind ca. 40 mm groß und haben auf der Rückseite eine Aussparung für einen Neodym ( Powermagnet ) Durchmesser 6mm Höhe 3 mm. Der Magnet ist mit einem geeigneten Klebstoff einzusetzen (je nach…
Insert for 500ml Nalgene bottles to assist with ideal drink flow
This is an adapter to put a Nalgene bottle in a fairly standard car cupholder, Print should be in VASE mode for best results. I started out with a fairly generic design, then got intrigued by a YouTube video regarding using vase mode for…
Jig/assembly/adaptor to allow you to print on a Nalgene bottle using the rotary bed on the Eufymake E1 UV printer.
The Algorithm™ Corporation forbids users from tampering with the device. It has a built-in system that will report to the nearest authorities if it is removed, tampered with, reflashed or reprogrammed. Consume the people that feed you.…
The strap of my Nalgene bottle broke. I created a replacement strap, with a small gap that I can use to "screw" the strap back in place. I had to cut a similar gap into the bottle ledge. This was designed a while ago. There are many…
I created this cupholder adapter for my 2016 Subaru outback to hold a hydroflask or nalgene. This print requires supports from the build plate, but is optimized to require very minimal supports. I printed this at 0.3mm in natural PLA and…
This replacement strap is intended for printing with TPU filament. It is stronger and more versatile than the original which tends to break in the corner from using the strap as a carrying handle. This strap has several advantages over…
This is a dryer stand for a wide mouth nalgene bottle. UPDATE I made a customizable version of this thing. Category: Kitchen & Dining
Adapter to attach a Sawyer Squeeze to a Nalgene narrow water bottle, with a vent for the air displaced when water enters the bottle. Printed at 0.2mm with organic supports, but will probably print fine without them.
------------------------------------------------Deutsch------------------------------------------------- Universalgleiter für Nut der Proxxon FET 27070 Version 1.0 Initial Version der Nutgleiter Kommerzielle Nutzung: Dieses Model ist für…
After the strap of my Humangear Capcap+ ( https://www.humangear.com/shop/p/capcap ) broke, I created this replacement part. While the cap itself greatly enhances the comfort of drinking from a Nalgene bottle, the strap's durability left…
I created this adapter so I could hook other 28mm thread devices to my Nalgene bottle. There are both Male and Female 28mm thread adapters. I printed these using 1.6 Dynamic and it gave it a nice smooth finish. Supports are set at 65…
NEW UPDATE - Improved backing plate with revised locking latch. 2 Piece Aquarium Algae Feeder. Great to keep your Triggers, Tangs, Angels, and many other marine fish happy in your tank. Simply open and place dried seaweed on screen and…
I created a little cover to go over the pods of the lettuce grow cups. Has a little lip on it so it locks well. I used TPU and a 0.8 nozzle. It's not beautiful but it works pretty well. I also added another solid cover for pods, not in use.
Effortlessly turn your Nalgene water bottle into a water dispenser for washing your hands or rinsing toys. The end flap snaps closed, and the model doesn't use any springs, o-rings, or screws. No brim or supports are needed. Print the…
What is it? Strap for holding the Nalgene 1L bottle cap. Why make it? Original broke. Latest revision Designed with FreeCAD 0.19 BOM To be printed out of flexible material Assembly Mount the small side on the bottle cap Mount the large…
Interlocking Nalgene/Hydro flask water bottle holder. Printed with PLA Plus at 5% infill. Inner diameter ended up at 94.144mm
Adapter to put a Nalgene 32oz water bottle in a car cup holder. Printed in Overture black PETG, 0 supports
Heavy-duty bottle cage for holding a 1-liter Nalgene or similarly sized bottle. A 1-inch velcro strap is required to secure the bottle along with electrical tape or adhesive foam to prevent it from slipping out. I wrap my bottles in…
A file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model, but…
Calgary Flames logo created with HueForge. You do NOT need a multicolor printer for this. Everything is done with filament swaps at set layers. Follow my profile for more team logos as I will continue adding more logos. Print at 100%…
soporte solo en la punta donde va el hueco de la argolla
Why buy a new strap that comes with a lid when you can just print the part you need at home? Designed to the same standards as the original with the flex feature in the middle. Printed in Fillamentum Flexfill 98A TPU on a textured build…
Wanted a version that used slightly less filament, allowed hopefully better airflow, and had a loop for hanging under the sink. Works beautifully.
3-piece modular cup holder for F-150 Inserts anchor down into existing cupholder using built in spring clips and expose M5D8L9 heatset inserts on top, spaced 4.5" center to center. Cupholder itself fits silicone booted hydroflask/Nalgene…
