Counting matching models…
Awesome Skull Bowl for Halloween candy/decoration. I would love to see your makes! Post them below. This is easily one of the coolest 3D prints I've done. It was designed for no supports, but I would use supports of at least 75+ degree…
Print approx. €13.56–€16.58 excl. taxPreliminary estimate for one variant
Please read the entire text before printing! I often make the mistake of not doing so. If you like the model, consider supporting my future projects: https://boosty.to/artificialworld/donate . 1. Model: Moon Appr. diameter: 210 mm…
Print approx. €6.56–€8.02 excl. taxPreliminary estimate for PETGSource material: PET
*UPDATED to V2 - The mustache is now more robust. It prints very well, is sturdier than V1, and perhaps most importantly looks very suave (as all well-maintained mustaches do). I believe that this will print very well at smaller sizes if…
Print approx. €12.88–€15.74 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (organic/tree support) Scale it as you like :)
Print approx. €25.42–€31.07 excl. taxPreliminary estimate for one variant
This model can be printed in two colors or If you prefer to print the model in a single color I hope you enjoy it! The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed…
Print approx. €18.62–€22.75 excl. taxPreliminary estimate for one variant
Ever wanted to eat candy out of a suburb dweller's Gothic horror dream mansion? Today is your chance! This print combines my favourites Halloween films mansions with my favourite printing mode, the vase mode. This hellish contraption…
Print approx. €2.05–€2.50 excl. taxPreliminary estimate for PETGSource material: PET
Pretty straight forward build for keeping your print area cleaner. The amount of small bits of plastic that comes from printing is aggravating. Vslot clovers are nice to keep that area clean, but the whole printer gets dusty and covered…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
Parametric Furniture Lifter - for roomba - no more dust rabbits Was always annoyed by the roomba not doing under teh furniture and having to do that by hand.. so i made a quick sketch in fusion 360 to make stands for the legs. and it…
Print approx. €5.81–€7.10 excl. taxPreliminary estimate for one variant
(pour le français, voir plus bas) Change easily your cabinet knob according your mood :) This is the Halloween edition! Please, this project contains only the custom parts for Halloween. You need the main part (ECK) in my original…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
This is one of my first attempts to use blender to model. It's a little rough in some aspects.. but considering it is meant to be exaggerated and creepy - I think it adds to it. I made this for my daughter this year - so keep that in mind…
Print approx. €15.50–€18.94 excl. taxPreliminary estimate for one variant
Hello, Here is a Halloween Gargoyle on a Pedestal . It’s a great-looking gargoyle, perfect for display. It has a spooky, gothic vibe. It’s also suitable for painting. My kids really love these figures and enjoy painting them! :-) Great as…
Print approx. €3.27–€3.99 excl. taxPreliminary estimate for one variant
A passtrough fidget made from honey comb infill. DO NOT USE THE STL File else it would print it normally use the gcode
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for one variant
Introducing 'the Cute Halloween Bat,' an easy-to-print (even without supports) little darling to add some charm to your Halloween. Just take a look at that adorable face and those cute ears. He may be small, but he has a big heart and…
UPDATE!!!🎃🎃🎃 You can now download a new version of witch hat: MadEye Hat! Downlaod from HERE Pumpkin Venom - No AMS is LIVE NOW! Patreon.com/DraftAxis for EXCLUSIVE content and COMMERCIAL license ✨ Meet the Grumpy Witch Hat! 🧙♀🎩 This…
Download below the entire cute kitty collection available for free for everyone! The collection contains 3 styled kittens with their own Halloween inspired counterparts - Vamp cat, Mummy kitty & Witch kitten. Complete with Bambu studio…
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts (and the box itself) can be modified in Fusion 360 (f3d file available in the files section). Update: In the meantime I also created a version…
Spooky season is coming so I decided to make some Halloween Pumpkins. This is the fourth one I decided to put on printables, but there will be more in the near future. This pumpkin is designed to be used with leaf( for extra cuteness) but…
This candy bowl comes in two sizes. The largest one is designed to print just within the size limit of a Prusa i3 MK3. Use super-glue to secure the stem in place. Grid supports are recommended. There have been some reports of tree…
Presenting a 3D model of a majestic, wing-spread Raven, ideal for Halloween! This elegant bird is incredibly easy to 3D print, and you won't even need any supports. It's a fantastic decoration choice that combines simplicity with spooky…
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts and the box itself (number of rows/slots) can be modified in Fusion 360 (f3d file available in the files section). IMPORTANT: If you want to…
JASON, never die! Rafts: NO Supports: Yes - TREESUPPORT in Cura oder Custom Supports Nozzle: 0.4 Resolution: 0.16 - 0.28 Infill: 10% Walls: 2 Die Streifen für die Maske mit Haarföhn oder Feuerzeug vorsichtig erwärmen, und mit Kleber an…
https://paypal.me/radicalreel Remix of MerganMcFergan's Gizo the spider. I'm not a fan of rafts so i made a Brim which is only partially conneced. I added slight support too source: www.thingiverse.com/thing:5044727
If you’d like me to keep going and bring you even more adorable models, you can support me on Patreon: patreon.com/draftaxis 🌸 Here’s my brand new design — a mischievous flexi pumpkin 🎃 ✨ He’s cute, playful, and just a little bit naughty…
Here's a really quick and cute cauldron for stashing some candy! I printed in vase mode with a 0.4mm nozzle, 0.2mm layers, and 0.8mm extrusion width for perimeters. This model can also be printed as a standard print instead of vase mode,…
This new model, just as the previous one, requires absolutely no supports (just a good filament and nice cooling)! After my original raven model was so well received i decided to perfect it a little. I didn't like how the feathers on the…
Carved pumpkin bowl for Halloween
Perfect to collect candy or just as a display. Easy to print: no support required, no brim required, can be printed in any nozzle size, any layer height, any filament. The model is already in the optimal orientation. The size is at the…
DISCLAIMER: I designed the potions for a friend and they wanted a poison apple along side them. I did not design the apple in the pictures I took but if you wish to get the full set you can support creator JAVIBU13 at…
After coming across afri.mandjelikian great design for the Dewalt/Stanley/Craftsman TSTAK FATMAX Versastack Organizer Nested Cups , I needed one for storing various sized M3 Button Head Socket Bolts in. I decided it would be more…
Spooky spider fridge magnet If you like it --> press like it :-) Here a model of the famous spider model from Jason C Kessler. I´ve added two sockets for magnets 5x3mm. Just make a pause at the top of the installation space(look before in…
Introducing my new cute Halloween decor an easy-to-print (no supports needed) little Cat that brings a touch of elegance and charm to your spooky season. Just look at those enchanting eyes and regal pose. Though small, this kitty has a…
"Ghosts" Cookie Cutter set - create multiple variants of ghosts Suitable also for making linzer cookies. Model contains 2 cookie cutters in shape of ghost 7 cutters for eyes 7 cutters for mouth Parameters: Ghost Cutter 1 - 62mm x 70mm x…
It's that time of year again! All of the candy corn that was created back in the '70s is being circulated again this year, lol! Make yourself a fresh set of candy corn earrings! Change colors at 8mm and 17mm heights. I print mine with 0%…
Decorate the frames of your doors
Description: Add some spooky charm to your Halloween setup with the Pumpkin Treat Keeper – Halloween Candy Bowl 3D Print Model ! This detailed pumpkin-shaped candy holder features an open mouth design filled with Halloween spirit —…
Join here to get access: https://www.patreon.com/kogi3d I went full Halloween mode with my new Articulated Frankenstein Hand! This creepy hand features a chunky Frankenstein-inspired design with stitched details, scars, fingernails, and…
Update 31.10.2024: In response to comments, I added new STL and 3MF files of the žilka/vein model (Žilka_Vein_no_support_needed.stl and Žilka-Vein.3mf). Some of you were confused about how to print it because the model has no flat base. I…
Spooky Knit Ghost LED Tealight Holder Get ready for Halloween with this adorable yet spooky ghost! This model is designed to hold a standard LED tealight, casting a warm, eerie glow through its charming knitted texture and glowing eyes.…
The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…
A fun little bat-shaped candy dish for Halloween candy. Measures about 160mm x 100mm x 40mm or 6.3" x 3.9" x 1.6". Default slicer settings work well.
If you are looking for a fun way to Spook up Dinner time Here are the files for my Halloween Salt and Pepper Shakers The Stones print great with zero supports and I would suggest printing the Bung/Plugs in a flexible filament, though I…
Remix de 02 formes que j'aimais bien ! Le résultat est vraiment cool Un joli chaudron Moon avec des anses mobiles + des pieds de dragons ( https://www.thingiverse.com/thing:2593806 ) (…
Pixel watch 2 and 3 charger pins are uni-directional thus if you get a right hand side stand, the placement of your pixel watch will be upside down. This model runs the cable around the frame and allows for your watch to face the right…
Here's a very not scary jack-o'-lantern candy bowl for Halloween! 🎃 I printed my jack-o'-lanterns in vase mode with standard settings except for the outer wall thickness. I changed this to 0.8mm, even with a 0.4mm nozzle, to make the bowl…
A creepy Halloween figure, great for your desk or table or a shelf somewhere. This looks good printed on silky transparent PLA, but I prefer black. The blue light effect inside the hood comes from a blue LED and coin battery. Needs tree…
Now You can have a Halloween accident when a nail pierces through your finger (hand,....). Add a bit of gauze (flaster), colour and you are ready to go. Print is fast with no suports.
Introducing the Creepy Hell Hound , your new cute (and kind of scary) desktop Halloween buddy. While he may look quite scary, he's an extremely friendly companion. No need for any kind of supports, he prints easily and quickly. Just load…
Ghost Cat Earrings / Pendientes Gato Fantasma
Summary This remix fixes two things the original did not address: needed to allow cable to pass up/down through hole(s) in surface to which the pulley is mounted, and the wheel itself was too large. Details @hedberg : thanks for the…
I have seen a few of these around and wanted to try making one myself. Print Settings I used: Bucket: 4 perimeters infill 12% Nozzle size .4 No supports Handle 3 perimeters Infill 12% Nozzle size .4 Snug Supports (for the rods going into…
This model can be printed in two colors or If you prefer to print the model in a single color I hope you enjoy it! The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed…
This model can be printed in two colors or If you prefer to print the model in a single color This file is thin, and my idea is to print it and then stick it together so that it shows on both sides. I hope you enjoy it! The speed will…
Celebrate Halloween with a unique and cozy twist! This isn't your average spooky ghost; it's an adorable "knitted" spirit that will bring a special, warm ambiance to your home. The design features a texture that perfectly mimics knitted…
Halloween 3D Printed Headbands – Perfect for Costumes and Parties! Add a unique touch to your Halloween costume with these custom-designed 3D-printed headbands! Each design is crafted to be both lightweight and comfortable, making them…
EARRING These are super easy-to-print models that require no supports. This model can be printed in two colors or If you prefer to print the model in a single color I hope you enjoy it! The speed will depend on the machine and the type of…
This light box is designed to be printed on a Bambu Lab Printer with at least 1 AMS unit. You will get 3 files The Front Plate - This is where all of the color lives. Import this file into your bambu studio slicer, lay it flat and then…
Spiderweb wall decoration You can create modern decoration with low use of materials. Infill: 100% Layer height: 0.2mm
Perfect for Halloween! Fast and easy to print, doesn't require supports.
EARRING These are super easy-to-print models that require no supports. This model can be printed in two colors or If you prefer to print the model in a single color I hope you enjoy it! The speed will depend on the machine and the type of…
This light box is designed to be printed on a Bambu Lab Printer with at least 1 AMS unit. You will get 3 files The Front Plate - This is where all of the color lives. Import this file into your bambu studio slicer, lay it flat and then…
Full Image Catalog The complete gallery of my works can be found at Portfolio. You can search by the file’s reference number or simply click the preview image to open it directly. This Stay Puft Marshmallow Man model captures the towering…
Ever tried putting a costume on a cat? This chonky little furball captures that exact moment of pure feline betrayal. Dressed up for Halloween—maybe as a wich, maybe as a dragon, maybe just "whatever we found"—this kitten is adorably…
Creepy music, eerie ambience, what could be missing? Some Halloween decorations! Fill your house with spooky fun, with a coffin case to hold your belongings, a set of mini Jack-O-Lanterns to light your way, and warning sign to keep…
Questa è la mia seconda versione della Ring Lamp. La prima versione è disponibile qui: https://www.thingiverse.com/thing:6687166 All'inizio volevo cambiare solo una base e aggiungere alcuni nuovi pannelli di Halloween nella Ring Lamp, ma…
A simple scary pumpkin! Supports are adjust for simple removal, works fine. Enjoy!
"Witch Please!" Just a nice little sassy coaster for Halloween
Fight over who gets to be the witch and who gets to be the fire! Print 5x fire and 5x witch. One board. We wanted to make a spooky halloween tic tac toe set to play in our free time. Utilize filament changes to make the fire features…
This is a thin/shallow addition to my original Hexagon Shelf modular system. These can be used to add some texture to your Hexagon shelving system. They can also be used at the perimeter to add a sense of the shelves fading into the wall.…
Bring some spooky-cute vibes to your desk! This Labu bu-inspired pumpkin-head creature blends Halloween charm with designer-toy aesthetics: a round jack-o’-lantern head, sly smile, and a fluffy little body that prints beautifully.…
Another biscuit cutter for making biscuits. Material: PETG or PLA or ABS Layer Height: 0.2mm Supports: None This is not dishwasher safe.
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
I designed these gravestones to be printed flat, requiring minimal color swaps and allowing easy customization. There are two styles of bases for you to choose depending on your style and how big and sturdy you want. They slide onto the…
Featuring expressive ears, big glowing eyes, and a wide creepy smile, it brings a playful yet spooky charm to any setting. Ideal for Halloween decorations, cosplay props, or simply as a fun collectible for fans of unique character…
Beveled version of Deathly Hallows has an identical front and back face and is designed to be printed without support. Designed to be a novel link in a cosplay “Maester Chain”.
Little voodoo toy for this halloween!
this is a really fun way to trick or treat. its easy to print without any support with this easy assembly even a child can do this this is the first time making something to fit a head so please check the scale before printing (if you…
Here you have a cute halloween devil with two pumpkins. The white render picture shows the 3D model you can download here, the colored picture shows ONLY a painting recommendation. Would be happy to see your makes! It is partly AI…
A cool little tealight holder with inserts for changing the design. If insert is too loose, upscale it to 3-5% or downscale the base 3-4%
horror tree Embossed version and non-embossed version This model can be printed in two colors or If you prefer to print the model in a single color I hope you enjoy it! The speed will depend on the machine and the type of PLA you are…
Grave, Zombie Wall Decoration for Halloween Layer Height: 0.2mm Infill: 100% You can print a modern and cool Halloween decoration with a small amount of material :)
Description: A spooky and stylish spinning top in the shape of a spiderweb, created especially for Halloween. Width: 50 mm Unique web-inspired design with an easy-to-grip handle for smooth spinning. Can be printed either as a single solid…
This is a mailbox flag system with multiple flags for different holidays and decors. Halloween, Christmas, and Fleur de Lis Flags are available so far, hopefully with more to come. There are two versions of the mount; Version 1: the…
A pack of 4 Halloween Keychains , including a Ghost, a Pumpkin, a Bat and a Grave!
Dowloand here : https://payhip.com/b/19h3R
Halloween tealight lighting design in the form of a Jason mask carved into a pumpkin. The flashlight is intended only for the electronic LED tea light. I use a 40mm diameter LED candle. I recommend using supports When using PLA, the…
This light box is designed to be printed on a Bambu Lab Printer with at least 1 AMS unit. You will get 3 files The Front Plate - This is where all of the color lives. Import this file into your bambu studio slicer, lay it flat and then…
This light box is designed to be printed on a Bambu Lab Printer with at least 1 AMS unit. You will get 3 files The Front Plate - This is where all of the color lives. Import this file into your bambu studio slicer, lay it flat and then…
This light box is designed to be printed on a Bambu Lab Printer with at least 1 AMS unit. You will get 3 files The Front Plate - This is where all of the color lives. Import this file into your bambu studio slicer, lay it flat and then…
A beautiful multicolored painting of a cartoon Zombie on the wall or window. A monochrome print is also included, which can be colored after printing. Size 137 x 217 x 2 mm If you have any idea about the theme of decoration, contact me in…
Varios cortadores y marcadores para estas fechas de Halloween
Design Concept This Halloween-themed keychain features a menacing Jack-o'-lantern face, capturing the spooky Halloween spirit with its sharp, carved features. The shimmering teal color adds a modern twist to the traditional Halloween…
Another Halloween model for yall! Hope you enjoy! I couldn't effectively reduce the vertices on the head base so sorry for it being such a large file. Oh, The Brains part does sort of come off easily so i might try working more on lid and…
As October brings the spookiness of Halloween, don't let your veggies feel left out. Turn them into hauntingly delicious pickles, and let the flavors of the season cast their magical spell! The fermentation lid made of PETG is designed…
This planter Is design for succulent, it has drainage holes and it is shallow vs wide. Size: 185mm diameter in my ender 3 v3 is around 14 hours printing time.
Single and 5 point eyes for Patchwork Halloween Edition.
Handle MUST have support. I used PETG as support for PLA. Even so, I had trouble with 2 out of 3 I printed. Used organic supports. It's all in the .3mf file. WARNING POSSIBLE CUTENESS OVERDOSE
