P
PrintablesOndřej Korynta
Harry Potter deathly hallows themed bookend
Harry Potter deathly hallows themed bookend. Please like and enjoy :).
- Downloads
- 4,328
- Likes
- 1,381
- Rating
- 4.33
Search results: allows
180 models
P
PrintablesRepoholy
Harry Potter earrings: Deathly hallows
A very fast print - it takes only 10 minutes - and you can make yourself or other HP fan happy! I recommend printing with 0.1 mm layer height. You can print it with any filament, I printed with PLA (mostly Prusament). Check out also my…
- Downloads
- 2,665
- Likes
- 557
- Rating
- 4.94
P
PrintablestbkMAKER
Deathly Hallows/Harry Potter Calibration Cube
Tired of making the same old boring calibration cube? So was I, so I designed this cube to allow you to run a series of tests. Not only will you have the standard things you're looking for in a calibration cube, but you also get a few…
- Downloads
- 1,949
- Likes
- 121
- Rating
- 5
P
PrintablesLele88
Deathly Hallows Keychain
A keychain with the Harry Potter's Deathly Hallows emblem.
- Downloads
- 936
- Likes
- 154
- Rating
- 5
P
PrintablesMenschM
Harry Potter Christmas Ornaments (Hedwig, Deathly Hallows, Hogwarts)
I made some Harry Potter styled Ornaments Three different Styles of the Deathly Hallows Symbol: Classic (NO support) Halfrund (silhouette of the elderwand) (NO support) Round. (fully modelled elderwand) (NEEDS support) Hogwarts Logo…
- Downloads
- 703
- Likes
- 187
- Rating
- 5
P
PrintablesHenry
Deathly Hallows Rotating Pendant
Deathly Hallows as a rotating print in place pendant. Print Settings Print it with a small nozzle / layer height to prevent as much detail as possible. A 0.4 mm nozzle is more than fine. Use supports on build plate only, they should…
- Downloads
- 672
- Likes
- 150
- Rating
- 4.67
P
PrintablesJamburgg
Phone Stand for Phones with Cases (allows for charging cable)
I'm sure you are all familiar with this design by now, it's a remix of an existing model with an enlarged holder to accommodate for thicker phones, even with cases. Includes a cutout to allow a phone to be held whilst charging, making it…
- Downloads
- 643
- Likes
- 34
- Rating
- 4.6
P
PrintablesShout
Harry Pottter Deathly Hallows - KeyChain
Harry Pottter deathly hallows keyChain. Category: Organization
- Downloads
- 603
- Likes
- 78
- Rating
- 5
P
PrintablesHazapic3d
Wall swallows decoration (Voronoï & porcelain like)
Wall decoration in the swallow shape, in the way of the porcelain that already exists in this type of design. The size is 18 cm and I've made it in two versions, one of which is voronoï to give it a lighter look and let the light through…
- Downloads
- 582
- Likes
- 96
- Rating
- 5
P
PrintablesPlace and Play 3D
Harry Potter, Deathly Hallows Ornament
Harry Potter/Deathly Hallows Ornament. Printed out of PLA. 10% - 15% infill No supports
- Downloads
- 565
- Likes
- 177
- Rating
- 5
P
Printablestecnoculebras
Harry Potter and the Deathly Hallows 2 lightbox
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
- Downloads
- 507
- Likes
- 122
- Rating
- 0
P
Printableslorehandyman
Harry Potter, Deathly Hallows LAMP
The Lamp is easy to print but it must be assembled. The main design must be glued to the white diffusion plate (and the birds if you want). Inside the box you can put what you prefer as lights. Battery led stripes, wired or simple wired…
- Downloads
- 418
- Likes
- 124
- Rating
- 5
P
PrintablesDoug Joseph (design8studio)
608 Pulley - allows cable up/down through hole(s) in whatever the pulley is mounted to
Summary This remix fixes two things the original did not address: needed to allow cable to pass up/down through hole(s) in surface to which the pulley is mounted, and the wheel itself was too large. Details @hedberg : thanks for the…
- Downloads
- 401
- Likes
- 61
- Rating
- 5
P
PrintablesLele88
Shopping Cart Coin - Token - Harry Potter Deathly Hallows
I designed this cute shopping cart coin with the Harry Potter Deathly Hallows emblem. Ho disegnato questo simpatico gettone per il carrello della spesa con l'emblema dei doni della morte di Harry Potter.
- Downloads
- 390
- Likes
- 45
- Rating
- 5
P
PrintablesYellowBulldozer
Harry Potter Deathly Hallows Cristmas Hanger
The Deathly Hallows Symbol Lucius Malfoy had in the one Harry Potter movie. I made this little model for my girlfriend so she has something she can decorate her christmas tree with.
- Downloads
- 382
- Likes
- 96
- Rating
- 5
P
Printables3DLada
Harry Potter Deathly Hallows Keycap
Harry Potter Deathly Hallows Keycap printed with White and Black
- Downloads
- 367
- Likes
- 99
- Rating
- 5
P
PrintablesHojlokkevej14
Harry Potter, The Deathly Hallows
Harry Potter, The Deathly Hallows
- Downloads
- 360
- Likes
- 68
- Rating
- 4.88
P
PrintablesKlaus
Deathly Hallows Symbol with rotating Ring -> Print in Place <- Harry Potter
Made this simple model of the symbol of the three deathly hallows for my girlfriend. The inner ring is movable and the model can be printed in place. It's a must have for every Potterhead and goes great with your Harry Potter shrine!…
- Downloads
- 358
- Likes
- 60
- Rating
- 0
P
PrintablesSven Trautmann
Diffusors for Harry Potter Deathly Hallows Table Lamp
I printed the Harry Potter Deathly Hallows Table Lamp ( https://www.thingiverse.com/thing:5617018 ) for my wife. To cover the light outlets I created these diffusers in TinkerCAD. Printed with 0.4 nozzle in concentric printing, first…
- Downloads
- 321
- Likes
- 151
- Rating
- 5
P
PrintablesMichal Fekete
Deathly hallows bookmark Harry potter (HP)
Hello, I want to make bookmark for my GF and she really likes Harry Potter so i made this one. You have two models to choose, bookmark is 2mm thicknes and bookmark_thin is 1,5mm. If you like this model please leave like and comment…
- Downloads
- 267
- Likes
- 31
- Rating
- 0
P
Printables3DStudio
Harry Potter Bookholder deathly hallows logo
I made a book holder from the movie harry potter from the logo of the deathy hallows without support line height 0.2 UPDATE 23 MARCH 2023: I made a 2nd version so that it remains more stable with the help of a book.…
- Downloads
- 264
- Likes
- 80
- Rating
- 5
P
Printablesgtorelly
Deathly Hallows - Spinning ring
This is the Deathly Hallows pendant from Harry Potter with a spinning ring. Instructions Just print without supports, the ring should spin right away. I've used black ABS in 0.15 mm layers. Category: Props
- Downloads
- 261
- Likes
- 36
- Rating
- 4.6
P
PrintablesJan Havic
Deathly Hallows Bookmark
Bookmark inspired by logo of Deathly Hallows from story The Tale of the Three Brothers - from Harry Potter books. Sliced in Prusa Slicer. 0.8 mm from Gembird Marble then replace filament 0.4 mm from Prusament Galaxy Black Print…
- Downloads
- 243
- Likes
- 33
- Rating
- 5
P
PrintablesFaeslich
Harry Potter Christmas Ornament: Deathly Hallows
I designed this Christmas Balls with different Harry Potter related motifs. Everyone consists of the base and the motif insert. In my example pictures I painted the base red and the inserts in gold and it turned out really nice. I also…
- Downloads
- 240
- Likes
- 64
- Rating
- 0
P
PrintablesMarcin Mączewski
Harry Potter Deathly Hallows Magnet
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
- Downloads
- 238
- Likes
- 45
- Rating
- 4.83
P
PrintablesDiego Valledor
Harry Potter Bookend (Deathly Hallows)
No special instruction is necessary. Printer: MK3S+ Layer: 0.2 mm Brim: yes Supports: No Nozzle: 0.4 mm
- Downloads
- 224
- Likes
- 41
- Rating
- 0
P
PrintablesRogueCmdr3D
Harry Potter - Deathly Hallows Pendant
The Deathly Hallows symbol is a triangular mark used as a representation of the Deathly Hallows, three legendary objects that allegedly, if united, would make one the "Master of Death". The symbol consists of a vertical line, a circle,…
- Downloads
- 216
- Likes
- 39
- Rating
- 5
P
Printablesjlc_1988
Deathly Hallows Earrings/Christmas Tree Ornament
An earring in the shape of the deathly hallows with an interior spinning Sorcerer's Stone. This model comes in 2 versions, one where the sorcerer's stone moves freely up and down (v1) and one where the sorcerer's stone is prevented from…
- Downloads
- 214
- Likes
- 71
- Rating
- 5
P
PrintablesJJ3D
Harry Potter - Deathly Hallows tea light / Svícen
I made that candle stand as a gift for my wife, she loves HP motives, so its for all the same lovers:-). It makes effective shadow on the wall. Standard tea candle fits perfect. Its super easy to print. No supports needed. Because its…
- Downloads
- 203
- Likes
- 63
- Rating
- 5
P
PrintablesLele88
Keychain Token Cart Coin HP - Deathly Hallows
I designed this cute keychain with the Harry Potter Deathly Hallows emblem. Both beautiful and useful at the same time, because it is the size of a 1€ coin and can be used for the shopping cart. Ho disegnato questo simpatico portachiavi…
- Downloads
- 198
- Likes
- 40
- Rating
- 5
P
PrintablesC3D
Harry Potter and the Deathly Hallows Keychain
Harry Potter and the Deathly Hallows Keychain
- Downloads
- 198
- Likes
- 20
- Rating
- 0
P
Printablesnpeep
Deathly Hallows - Floral Design
Found a picture of a pretty design, but I could never find an STL for one. So using Gimp I cleaned up the image, imported to Microsoft Builder, and created one! I plan to use it as a stencil to bleach the design onto a shirt using a light…
- Downloads
- 187
- Likes
- 30
- Rating
- 0
P
PrintablesLele88
Deathly Hallows Earrings - Orecchini Doni della Morte
I looked for deathly hallowed earrings, but I didn't like the ones I found, so I remixed a design of my key ring to make it into earrings, the modification consists of making the hook ring smaller. Ho cercato degli orecchini con i doni…
- Downloads
- 181
- Likes
- 73
- Rating
- 5
P
Printablesvoidbubble
Petrified Shallows (Tealight holder - Voronoi noise)
Time stands still and memories carved in stone capture eternal paths of journeys that once were and always will be. Open source version of https://cosmicjubilee.com/designs/petrified-shallows/ - available to buy now! This tealight holder…
- Downloads
- 167
- Likes
- 45
- Rating
- 5
P
PrintablesMatyskLP
Harry Potter Deathly Allows keyring
Harry Potter Deathly Allows keyring
- Downloads
- 159
- Likes
- 12
- Rating
- 4.67
P
PrintablesDaPi
Harry Potter Deathly Hallows Dogtag / Keychain
The dogtag has enough room for a micro SD card or a little piece of paper to note your adress and phone number if your dog gets lost. The backside has two arrows and “PULL” written on it to indicate how to open it. Dogtag printed with…
- Downloads
- 159
- Likes
- 52
- Rating
- 0
P
PrintablesOndrej Kulhanek
Harry Potter/Deathly Hallows
Deathly Hallows pendant from Harry Potter. I printed the model with supports only on the printing mat or you can paint them in PrusaSlicer. I wouldn't speed up the printing too much because the stick in the middle might not work. I…
- Downloads
- 154
- Likes
- 26
- Rating
- 0
P
PrintablesLyam 3D
Harry Potter - Deathly Hallows - Tape dispenser with Golden Snitch Lid
N’hésitez pas à partager vos fabrications. Printer brand : Creality Printer : Ender 3 Pro Rafts : No Brim : No Supports : No Infill : 15% Filament brand : Wanhao Filament material : PLA Filament color : Wood
- Downloads
- 144
- Likes
- 51
- Rating
- 5
P
PrintablesValkyrie Forge
squishmallows Baby Yoda Grogu
squishmallows Star wars Baby yoda Grogu just look how cute and squishy he is in is little brown robe
- Downloads
- 136
- Likes
- 32
- Rating
- 5
P
PrintablesMaoman
Ender 5 Pro Direct Drive Bracket + allows for CR Touch
Madau's original design worked great and was nice and strong, but when I got a CR-Touch probe I discovered they do not play nicely together. I removed a small piece to make room for the CR-Touch and that does make the bracket slightly…
- Downloads
- 131
- Likes
- 13
- Rating
- 0
P
PrintablesOWL ART
Bookend Floating Deathly Hallows
Harry Potter-style bookend with floating illusion. The model is hollow inside for less material consumption. I printed it on MINI+ with 0,4mm nozzle and PLA. Print info Can be printed with 15% gyroid infill (model is hollow inside).…
- Downloads
- 131
- Likes
- 106
- Rating
- 0
P
PrintablesFergyMcFerguson
Deathly Hallows 45 LP Adapter
45 RPM vinyl record adapter modeled after the Deathly Hallows symbol from Harry Potter series. Enjoy! 1.5" outside diameter, 0.25" inside diameter.
- Downloads
- 129
- Likes
- 31
- Rating
- 5
P
PrintablesSmoothDragon
Amulet: Deathly Hallows
Beveled version of Deathly Hallows has an identical front and back face and is designed to be printed without support. Designed to be a novel link in a cosplay “Maester Chain”.
- Downloads
- 126
- Likes
- 7
- Rating
- 5
P
PrintablesDarthTommy
Raspberry Pi Zero 2 W Case that allows heat sink
I wanted to use this case but the Pi wouldnt fit with the heat sink attached, so I added some room so it'll fit. With this kind of heat sink you no longer need the holder for the top of the case as the heat sink is tall enough. I also…
- Downloads
- 121
- Likes
- 22
- Rating
- 5
P
PrintablesLele88
Deathly Hallows Pen - Penna Doni della Morte
A pen with the Deathly Hallows symbol. You have to buy a Bic Cristal pen and remove the cartridge inside, and then insert it into the pen as soon as it prints. Una penna con il simbolo dei Doni della Morte. Bisogna comprere una penna Bic…
- Downloads
- 116
- Likes
- 16
- Rating
- 5
P
PrintablesAlison
Deathly Hallows Ring
DISCLAIMER: I haven't printed this myself yet - I only created the STL. A ring depicting the deathly hallows symbol from Harry Potter. The ring has a diameter of 17.25mm and could be scaled to fit you. Print Settings Supports: Yes…
- Downloads
- 115
- Likes
- 23
- Rating
- 0
P
Printablesmycreativechaos8
Deathly hallows cookie cutter
Made by a Harry Potter fan for other Harry Potter fans. Make your cookies a bit more magical with this cookie cutter.
- Downloads
- 107
- Likes
- 13
- Rating
- 0
P
PrintablesJames Holmes
IKEA Kallax Cube Unit - Leg / Riser (18cm) - allows for use with robot vacuum
This model was designed to raise the height of a Kallax-style unit by 18cm to allow for a robot vacuum and dock to fit neatly underneath. It comfortably provides sufficient clearance for a Roborock S8 dock. It comes with three holes per…
- Downloads
- 103
- Likes
- 24
- Rating
- 0
P
PrintablesMatt Blanco
Deathly Hallows Book End
Inspired from the Harry Potter Series, I've made a Deathly Hallows Book End as a decorative additive to your bookshelf. Quite sturdy for their size, I think you'll find these to be a great addition to your book collection.
- Downloads
- 99
- Likes
- 26
- Rating
- 5
P
PrintablescadByPhaRaoh
Harry Potter Deathly Hallows Elder Wand Stand
I had recently bought an elder wand so decided I wanted to make a stand I can stick to the wall. And just like that the “Harry Potter Deathly Hallows Elder Wand Stand” was born. UPDATE: v2 is half the thickness UPDATE 2: I have added a…
- Downloads
- 98
- Likes
- 20
- Rating
- 0
P
Printablesteachingonthespec
Harry Potter Deathly Hallows Bank - No Supports
My class and I came up with this simple piggy bank with the Deathly Hallows Symbol on it. They love listening to the Harry Potter books during our daily read-aloud time so we thought this would be a cool design. There is not a coin…
- Downloads
- 95
- Likes
- 22
- Rating
- 5
P
PrintablesValkyrie Forge
squishmallows Minni mouse
squishmallows Minni mouse mickeys great love sins day one just look at that little bow on her head super cute
- Downloads
- 94
- Likes
- 24
- Rating
- 0
P
PrintablesHaggiwatt
- Downloads
- 90
- Likes
- 11
- Rating
- 0
P
PrintablesAlex_Iskra
Deathly Hallows for couples
This couple key chain/pendant was inspired by J.K. Rowling Harry Potter book series and movies. Parts are printed separately, then fit one another. Wand and triangle tolerances are 0,5 mm. May need some filing or sanding depending on your…
- Downloads
- 89
- Likes
- 28
- Rating
- 5
P
PrintablesDesign•Slice•Print Studio
Stay-Puft Marshmallows Logo
The original 1980s Stay-Puft Marshmallows logo!
- Downloads
- 88
- Likes
- 29
- Rating
- 0
P
PrintablesValkyrie Forge
squishmallows Mickey mouse
squishmallows disneys Nr 1 mouse Mickey mouse he and the rest of his buddys just begg to be printed in color or painted :p
- Downloads
- 85
- Likes
- 23
- Rating
- 0
P
PrintablesDash
Deathly hallows easy printed pendant
The file can be printed with a 0,4 mm nozel and 0,2 layer height. I printed from PLA.
- Downloads
- 82
- Likes
- 18
- Rating
- 5
P
Printablesエリザ
Deathly Hallows
Just a fictional print of Deathly Hallows from the Harry Potter movie series.
- Downloads
- 81
- Likes
- 2
- Rating
- 5
P
PrintablesJimmy Ostler
Harry Potter Deathly Hallows Bookmark
Its a perfect bookmark for anyone who likes Harry Potter
- Downloads
- 78
- Likes
- 10
- Rating
- 0
P
PrintablesIguanaman
Deathly Hallows Perpetual Calendar
This is a remix of a perpetual calendar on Thingiverse. https://www.thingiverse.com/thing:398403 Supports should not be needed.
- Downloads
- 75
- Likes
- 16
- Rating
- 0
P
PrintablestbkMAKER
Deathly Hallows Always Pendant/Ornament/Keychain
A simple Harry Potter Deathly Hallows Keychain. Great as a gift, prints in under 15 minutes. Designed to print at 0.32mm layer height at 0.40mm layer width. At that layer height the layer lines really pop and with concentric top layering…
- Downloads
- 68
- Likes
- 13
- Rating
- 5
P
PrintablesPraetorianCZ
Lumos / Deathly Hallows wall fanart (Harry Potter)
Version 2 - added mouse ears for better adhesion in the corners and wider outline. Easy to print. Hallows insert (and/or the white outlines) may be printed with luminescent filament for awesome effect. Printed with eSUN PLA+ No supports…
- Downloads
- 67
- Likes
- 23
- Rating
- 0
P
PrintablesAsh Patterson
Deathly Hallows bookmark
You can change the thickness (I recommend in 0.2 mm increments, for a 0.4 mm nozzle)to Change how stiff it is. It is currently 0.6 mm thick. 0.2 mm layer height
- Downloads
- 67
- Likes
- 5
- Rating
- 0
P
PrintablesJERRY
Deadly hallows Bookstand
Easy Print no Supports needed. All edges are chamfered.
- Downloads
- 65
- Likes
- 14
- Rating
- 4
P
Printablesandreas moor
Deathly Hallows Wand Holder
Made this to hold an elder wand that was 3D printed. Printed in PET-G on ender v3 KE setting maxed at 500mm/s and I think I had the stock extruder set to 27 or 30 mm^3/s so that may have caped actual printing speed. Also printed at .14…
- Downloads
- 65
- Likes
- 9
- Rating
- 0
P
PrintablesAsmodeusVirolac
HarryPotter Deathly Hallows Symbol
A simple Deathly Hallows symbol with two small holes for a cord so you can wear it around your neck. I made the model for a bachelorette party. I then added the name to the lower crossbar using the Prusa Slicer. I printed it with Nobufil…
- Downloads
- 65
- Likes
- 9
- Rating
- 0
P
PrintablesBadLuckmyDude
Harry Potter - The Deathly Hallows Bookstand
Harry Potter Bookstand - I printed it with my Creality Ender 3 S1. Made with Blender.
- Downloads
- 64
- Likes
- 11
- Rating
- 0
P
PrintablesAlexParpa
The deathly hallows Beads
Harry Potter Theme sweatshirt beads
- Downloads
- 63
- Likes
- 34
- Rating
- 5
P
Printablessswilson
Open air case for B75H2-AD motherboard from Acer Veriton (allows for 2 slot video card)
Open air computer case incorporating Remix of mATX motherboard tray ( https://www.thingiverse.com/thing:3722450 ) to fit Acer Veriton B75H2-AD motherboard (244 X 200mm). Mainly designed to allow for the use of a 2 slot video card (the…
- Downloads
- 59
- Likes
- 7
- Rating
- 0
P
PrintablesTomáš Stratil
Harry Potter - Deathly Hallows Bluetooth speaker
This design is a Deathly Hallows style case for Bluetooth speaker Creative MUVO 2C. You need to have some skills with electronics, to rebuild the original speaker. I create a simple PCB for a change of switches and a micro USB connector.…
- Downloads
- 58
- Likes
- 25
- Rating
- 0
P
Printablesat0maly
Deathly Hallows Bookend
A bookend styled with the deathly hallows and basic Harry Potter symbols.
- Downloads
- 57
- Likes
- 15
- Rating
- 0
P
PrintablesAhaan Designs
Deathly Hallows Jibbit From Harry Potter
Remixed model Works on all adult crocs print with more than 10% infill for best results
- Downloads
- 56
- Likes
- 9
- Rating
- 5
P
Printablesadasimo.92
Bookend Harry Potter and the Deathly Hallows
Bookend dimensions: height 90mm, width: 100mm, depth 56.6mm
- Downloads
- 55
- Likes
- 4
- Rating
- 0
P
PrintablesMatt Duffield
Harry Potter Deathly Hallows drawer pull
Harry Potter drawer pull I used 80% infill but works with 30% as well printed with supports
- Downloads
- 54
- Likes
- 19
- Rating
- 0
P
PrintablesIgnacy Godlewski
The steeping gallows, a new way to use tea bags
Add a touch of dark humour to your tea break with The Steeping Gallows — a practical tea-bag string holder designed to clip onto the rim of your cup. Simply attach the holder, loop the tea-bag string over the hook and let your tea brew…
- Downloads
- 52
- Likes
- 15
- Rating
- 0
P
PrintablesPrintopia3D
Deathly Hallows pendant with a twist
Simple model to print in place. I printed with normal 0.2 layer height profile Does not need supports.
- Downloads
- 52
- Likes
- 5
- Rating
- 5
P
Printablesjk_printer
Modern gallows wall lamp
A modern gallows wall lamp with real wood and a vintage-style socket and light bulb. It brings warm, cozy light and wooden accents to your room. The main housing clips in place without tools and can be opened again later on by slightly…
- Downloads
- 51
- Likes
- 13
- Rating
- 0
P
PrintablesGregregorovich
USB SD MicroSD card holder. Theoretically allows to store the thin USB sticks.
A holder for SD cards, MicroSD cards and USBs. Both the thin USBs and the full size Type As. How I Designed This I took a lot of the design from these 2 Things: http://www.thingiverse.com/thing:931121 by IndaLight…
- Downloads
- 50
- Likes
- 4
- Rating
- 0
P
PrintablesSgt.Pepper88
Harry Potter Deathly Hallows Always sign
For Harry Potter Fans! Deathly Hallows Always sign. V1 : Simple sign Let me know if you need modification or etc. Have Fun!
- Downloads
- 48
- Likes
- 10
- Rating
- 0
P
PrintablesPunkgeek
Ergonomic bike handlebar grip (allows bar-end shifters)
I wanted an ergonomic handlebar grip that would work with bar-end shifters, but I couldn't find one. So I made this. It has a channel to allow the cable from the shifter to passthrough and is quite comfortable. Print in TPU with 10%…
- Downloads
- 46
- Likes
- 2
- Rating
- 0
P
PrintablesPepe
Book stand deathly hallows
I have printed the stand on its side for added strength of the weighted corner. Used infil of 10% and marbel PLA.
- Downloads
- 44
- Likes
- 6
- Rating
- 0
P
PrintablesLele88
Deathly Hallows Button
I designed these buttons for a child Harry Potter fan
- Downloads
- 42
- Likes
- 16
- Rating
- 5
P
PrintablesUserJohn
Harry Potter and the Deathly Hallows
Improvisation on a theme "Harry Potter and the Deathly Hallows"
- Downloads
- 41
- Likes
- 5
- Rating
- 0
P
PrintablesValkyrie Forge
squishmallows chewy
squishmallows Star wars chewy look how fuzzy he is
- Downloads
- 40
- Likes
- 17
- Rating
- 0
P
Printables3dprintree
Deathly Hallows Button
Button designed as a Deathly Hallows symbol. Quick and easy to print with no supports and no bridges. If you were interested in commercially using my models you can check out my Patreon. patreon.com/3dprintree
- Downloads
- 39
- Likes
- 6
- Rating
- 0
P
PrintablesWeasel
10 Battery Case For Spring Window Fashions Shades (Allows Re-Chargeable Batteries)
This is a replacement/enhanced battery holder for the Spring Window Fashions battery holder for their powered window shades. The problem with the factory one is that it is designed to deliver 12 volts. Which is normally fine if you use…
- Downloads
- 38
- Likes
- 4
- Rating
- 0
P
PrintablesValkyrie Forge
squishmallows Abu
squishmallows Disneys alladins best friend in the world Abu the monkey
- Downloads
- 38
- Likes
- 14
- Rating
- 0
P
PrintablesPablo Nicolas Muzzio
Deathly Hallows Tree Topper - Wizarding Holiday Edition
Bring a touch of wizarding magic to your Christmas tree with Deathly-Hollows-inspired tree topper crafted for easy 3D printing and maximum holiday charm. This model was born after my wife—an unapologetically obsessive Harry Potter fan who…
- Downloads
- 37
- Likes
- 12
- Rating
- 0
P
PrintablesPadrick77
Deathly Hallows Wand Holder
This is a wall display for 3 wands. It was printed with multiple colors however can be done on one and painted.
- Downloads
- 36
- Likes
- 13
- Rating
- 0
P
PrintablesKT Prosthetist Orthotist
Nintendo Switch Joy Con Drink Holder (Deathly Hallows Remix)
original model from thingiverse by sanzliot July 28, 2017 Added the deathly hallows to the front
- Downloads
- 36
- Likes
- 10
- Rating
- 0
P
Printables3D Gene Designs
9 3/4 & Deathly Hallows magnets
Two simple magnets inspired by Harry Potter. For the Deathly Hallows you can use house colors to print them in. Each one is made to waste as little filament as possible which is why the solid backing. If you'd like to help me out or have…
- Downloads
- 34
- Likes
- 8
- Rating
- 0
P
PrintablesMANIC 3D PRINTS
All Hallows’ Embrace – October 31st Halloween Hueforge
🎃 All Hallows’ Embrace – Vintage Halloween Hueforge Art Print 🌕 Celebrate the magic of October 31st with All Hallows’ Embrace , a bold Hueforge art print featuring ornate vintage lettering surrounded by grinning jack-o’-lanterns, swirling…
- Downloads
- 33
- Likes
- 18
- Rating
- 5