Counting matching models…
Amazfit T-rex 3 watch stand with built-in charger had printed it on my Ender 3 print settings - print height - 0.24 infill - 15% wall - 3 bottom - 4 top solid infill - 4 material - galaxy blue PLA (I know it is purple ) support - organic…
This is a stand made for the Amazfit GTS 2 mini smartwatch. It print correctly on the side, without support, with 0.2mm layer height. The base of the stand is a bit too light, mine is double face taped on my desk. Made with onshape :…
This is a charging stand for the Amazfit GTS smart watch. You may need to lightly sand the hole where the charger pushes in from behind to make it a better fit. It needs to be tight but not so much it damages the charger. It will depend…
Fits for the available charger from AMAZFIT smartwatch brand. 0.2mm layer height and some small area support is necessary (print orientation as shown in the uploaded .stl file)
From thingiverse https://www.thingiverse.com/thing:5636189
Quick and easy charging stand for Amazfit T-Rex Pro watch. Other Amazfit watches should work too, if they share the same charger. Confirmed models by community: T-Rex (just 90° rotated) Amazfit Bip U Pro Smart Watch T-Rex 2 Dissasembly:…
A stand that ensures your smartwatch is always in its place and your charger never gets lost. The charger fits perfectly into the opening, keeping it securely in place when removing the watch. However, if you need to take it on a trip,…
This is a charging stand for the Amazfit T-rex 3 smart watch.
The remix is a PrusaSlicer project with the original STL including negative volumes. The negative volume of the charger is provided as a step file. The negative volume is crudely measured. I have omitted curved tangents, bottom curvature…
Подставка для зарядки часов Amazfit Balance
A little holder for the watch :) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Filament: Slim3D PLA Dark Green Category: Other
This fits the charger for the amazfit gts 3 for easy charging
Sturdy stand for Amazfit T-Rex v1 smartwatch or watch with similar charger type. Use supports only under cable guide, preferably organic
With inspiration from other stands on printables, I took my stab at modeling a new stand in Fusion 360 for her new Active 2 Amazfit watch.
Add parametric *.stp file. Print Settings Printer brand: Flying Bear Printer: Ghost 6 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 15 Filament brand: Hi-Tech Filament color: Black Filament material: ABS
This is only adapter for Amazif T-Rex watch. Original Dock station is here: https://www.printables.com/cs/model/342610-universal-smartwatch-dock-apple-google-samsung-ama
Thank you Casper_FH for the nice Desinge. I Remix it for my Amazfit Balance 2.
This is a smartwatch charging stand/dock for Amazfit charger type B. According to Amazfit website, the charger is the same for all those watches : Amazfit GTR 4, Amazfit GTS 4, Amazfit GTR 3 Pro, Amazfit GTR 3, Amazfit GTS 3, Amazfit GTR…
I made a very narrow and round edge loop band to keep the band safer without having annoying square/too high edges. Printed in TPU Category: Accessories
Bit unusually shaped charger for Amazfit Balance and all the other watches using the same charger. From side, it looks like a bit like a swan, so it got its name. Watch should fit nicely at the “head” of this holder and back can be used…
The little strap loop that comes with the Amazfit Bip keeps slipping off and it is annoying. So I designed this one that will poke into one of the notches to stay in place. Print instructions Print Settings Print using TPU or Ninjaflex.…
This is a Charging-Stand for the Amazefit GTS Required are 4x 2,5x8mm spax screw
Die Aussparung passt für das originale Ladekabel
Charger Stand for AMAZFIT T-rex 2 (3 piece) m2.6*8mm flat-head wood screw. Print Settings Printer Brand: ELEGOO Printer: ELEGOO MARS 3 Pro Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Filament: ALL PLA or PETG ALL…
Horizontal Support for Amazfit Band 7 using the original charging cable. 20% infill tree support 3h and 22g used
After trying a bunch of smartwatches I decided to go back to Amazfit Bip. It is an amazing timepiece no other could compete in terms of battery life. The only reason I was trying the other watches is that I never was quiet happy with…
You will need 2 3X16 screws for assembly.
Stand for amazfit bip 3 watch, it may be suitable for other amazfit models. Print with automatic supports on organic trees. Stand para reloj amazfit bip 3, es posible que valga para otros modelos de amazfit. Impirmir con soportes…
Amazfit T-Rex 2 wristband free loop replacement. Print with TPU, full perimeters. Try experimenting without supports. There are two versions of free loop wit inner pin, one with chamfered inner pin for easier printing without supports. If…
remixed to fit an amazfit band 7 watch base of the stand is larger than the original
Did not want to wait days or weeks for a replacement (Or pay money ;-), I like to pay with time)- so obviously I made it by my self. Printed in TPU
This smartwatch stand can house the magnetic charger of the Amazfit GTS 2/2mini. I designed it specifically for the Mini because the ones I found on Thingiverse were too big and cumbersome and I wanted a more compact design. I included a…
Nice and clean stand/charging dock for the AMAZFIT GTS. Charging connector is just glued in the stand.
It’s a charging stand for the amazfit BIP-3 smartwatch
The Amazfit Bip 6 uses a small magnetic USB-C charging adapter that clips onto the back of the watch. Unfortunately the magnet is fairly weak, so the charger can easily shift if the watch moves or if the cable pulls slightly on the…
My watch's band retainer got loose after a while and kept moving around. This design locks on the band's holes with the protruding piece, so no more random moving. 16/03/2026: Added a 2nd version, taller, and with modified "pin". The goal…
Split to allow for flat printing, amazfit gtr mini and t rex 2 chargers. even though they look very similar they differ. make sure to lay flat before printing!
Spare plastic loop for Amazfit watch strap. Inner dimensions: 24x6mm
Video link: https://www.youtube.com/shorts/Gr3IlYEjcjs
2 part charging cradle for Amazfit GTR4
This strap is substitute for original strap retainer for amazfit smart watch. It will help to keep the strap is place. My watch - Amazfit GTS 2 mini Printing: 2 paramiters (no infill) layer height 0.15 mm filament TPU or other flex
Watch holder for Amazfit GTS, it's a holder for watch a charger.
How annoying can it be that the band on your wristband of the amazfit constant slips off! Well.........we just fix that! Perhaps it fits other bands?? This is the smallest thing I ever made but it did took some fiddling to create it. The…
This is minimalistic Amazfit GTR3/GTS3/GTR4/GTS4/T-Rex2/Cheetah charging stand. Original model was created for round Mi Band charger. I recreated the similar model from scratch when I have switched to Amazfit GTR3. Requirements: M3x12mm…
V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Česky: Jedná se o otočný držák na hodinky Amazfit GTS 3 s možností přidělání na Xiaomi lampu Mi…
Amazfit GTR 4, GTR 3, GTR 3 Pro, GTS 3, GTS 4, T-Rex 2 charger mount. Holds the magnetic end allowing to just pop the watch on it. Has a tab with a hole to screw it down to whatever you wish
Just a little stand I threw together from a part I recreated for my Dad after the place that originally sold this design stopped making them. Edited to fit the Amazfit GTR 2 charger. Printing it laid down needs the least amount of support.
Hi everyone! I couldn't find a suitable charging dock for my Amazfit GTS 2e, so I created my own. Please excuse any design flaws; this is the first time I'm sharing one of my designs publicly. I created it because there were no existing…
Print it on the left side with suppports only on printbed. Depending on the printer, scale it up by 1-2%. I didn't and it fits neatly
The handle consists of two parts, you need to use glue to connect both elements.
Stojánek na přivrtání pro nabíjecí stanici hodinek.
Print using TPU material without requiring any support structures.
can be used to install 20mm generic straps for Amazefit Trex watch
You can modify the model in model VarSet, or just ask me in the comments to upload a correctly sized one
Just a little stand I threw together from a part I recreated for my Dad after the place that originally sold this design stopped making them. Edited to fit the Amazfit GTR 1 charger. Printing it laid down needs the least amount of support.
It uses standard Amazfit charger and solves issue where it was very easy to disconnect it while charging. Charging station allows to use watch while it is charging, see notifications etc. It has nice cable management solution, where you…
Ich brauchte für meine neue Uhr einen Ständer in dem auch das Ladegerät Platz findet. Gedacht, getan.
Print instructions: Prusament PLA or PETG Infill: 15% Supports: No Settings: 0.15 mm balanced Speed: Reduced
Amazfit T-rex smartwatch bracelet lock ring made from TPU. The bracelet lock ring broke on the original bracelet, and again on a second one. This time I have a 3D printer, and I'm not buying a 3rd bracelet ;) just because of that.
No Support, 50% Infill, no clue needed!
I wanted a cool changing stand for my bip 5, so I modified(not that well tbh since I didn't want to mess with fusion360) the magnemite model, adding a charging cable hole to the screw head. I cut the screw head to reduce the use of…
I needed a cover for my Amazfit, so I modeled this very simple design to try and use. Not that useful for me because it makes the watch a little bulky, but I'm sure someone could improve the idea if I didn't do it before. Hint: Glue a…
A quick replacement strap I modeled up after my existing ones broke. It needs to be printed in TPU. So far, only the adjustment strap has been remade, but the other hook side is coming very soon. For both straps, you need to pause the…
Ein einfaches Modell um die GTR3 an der Wand zu laden.
Base carregadora para relogios Amazfit GTS, base com medidas 70 mm de profundidade x 80 mmde altura x 50 mm largura, 32 gramas de material , usei PLA , 1H32minutos de impressão. usei impressora de filamentos mas pode ser feito tambem em…
K montáži potřebujete 1 šroub M3, závitovou tyč m3 x 30mm. Váleček se závitem M3 o průměru 6 a kroužek o průměru 4,5mm se závitem M3. Tisknul jsem z Petg, 10mm 100% výplň, zbytek 30%
A specially designed holder for Amazfit Active watches that ensures safe and organized storage of your device. The holder protects the watch from scratches, makes it easy to place and pick up, and its compact design is suitable for a…
Charging adapter for my Amazfit GTR Mini to work with the Anker 335 Wireless Charger (3-in-1 Station). See pics for supports. Used parts from Sykytiskne 's Amazfit T-Rex Pro charging stand and Brandon Marotz 's Anker 335 Pixel Watch 2…
I created a model to attach my amazfit smartwatch charging station to the honeycomb storage wall (HSW): The fit and measurement works for my printer. If your printer is more accurate than mine, it could be wrong. Right now the USB-C cable…
Supported Amazfit watches/chargers: GTR 4 / GTR 3 / GTR 3 Pro / GTS 3 / GTS 4 / T-Rex 2 I created 2 new versions of the stand - custom made for Bambu printers: Best Quality version - This version takes more time, but has the best overall…
A quick replacement strap I modeled up after my existing ones broke. It needs to be printed in TPU. So far, only the adjustment strap has been remade, but the other hook side is coming very soon. For both straps, you need to pause the…
Base carregadora para relogios Amazfit GTS, base com medidas 70 mm de profundidade x 80 mmde altura x 50 mm largura, 32 gramas de material , usei PLA , 1H32minutos de impressão. usei impressora de filamentos mas pode ser feito tambem em…
This model is a simple under-desk mount for the Amazfit Active 2. I printed it with ELEGOO PETG Pro on a Centauri Carbon 2 with 0.2 mm layers and default tree support, but I think other materials should print as well. I used 2-sided tape…
I wanted to replace my watch band, now it's printable! You can find Strap Holder here https://www.printables.com/model/1044343-tpu-watch-band-strap-holder-keeper-loop-retainer-e Reuse all non-plastic parts from older strap. I recommend to…
iPhone 12 Pro Max Stand with integrated charging stand for Amazfit Smartwatch
This awesome stand has an empty space on the left that is perfect to hold a ring\smart ring.. so I designed a simple ring holder. Once printed, simply glue it to the stand. If you need a different size, simply resize it in the slicer.
watch strap keeper holder External dimension 23 x 6,3 Internal dimension 20 x 3,3 Print TPU
Stand for standard charging Amazfit, only the stand is required for assembly, everything is assembled very tightly.
Elevate your Amazfit Balance watch charging experience with this sleek stand, featuring a built-in tray for added convenience. Designed with a hollow interior to neatly route the charging cable, it includes a discreet rear hole for a long…
Simple dimensionally accurate model of Amazfit Balance 2 to “try it on” before buying / get a feel for the size
Tray and antislippery ( for glass table ) for Amazfit Balance stand https://www.printables.com/model/1272146-watch-charging-stand-amazfit-balance/remixes under patch printed in TPU Tray and patch glued with super glue
Its not perfect, read the notes! Print with 0.2 res or the supports will fail. Also Change Axis percentage as follows: X= 97% Y= 99% Z= 99% if you want proper GTS hole, check this stand out: https://www.thingiverse.com/thing:4120786 Print…
This part is skadis board adaptor used instead of base of original model. It fits directly on arm and into SKADIS and secures with same screw as base of original model. If you want to support my work you can buy me a coffe.
This 3D printable model is designed as a charging mount for the Amazfit Balance 2 XT smartwatch , specifically intended to be installed under a desk for a clean and space-saving setup. The mount securely holds the charger and allows cable…
This build fits the Amazfit BIP 6 Smart Watch. The Amazfit charging pad fits snugly in the nook of the top piece. I made this because I got tired of having to find a place to charge my smart watch that is stable and isn't in the way.…
Stand for charging your smartwatch, designed for the Amazfit Active 2 but easily adaptable for other chargers. I am including the STEP file in case anyone wants to modify it. To avoid using too many supports during printing, I have…
I really wanted a watch stand for my AmazFit Active Edge watch but found it hard to find one for this model as AmazFit has discontinued it. Using a print for a different watch as a refference i redesigned this to fit the magnetic charger…
Amazfit BIP U PRO clock watch strap ring replacement, two heights available 6 and 8 mm, can be printed in PLA (photo), PETG and TPU (best)
This model is a simple under-desk mount for the Amazfit Active 2. I printed it with ELEGOO PETG Pro on a Centauri Carbon 2 with 0.2 mm layers and default tree support, but I think other materials should print as well. I used 2-sided tape…
The charger holder comes in 2 parts. The base is permanently clamped to the shelf leg with an M4 bolt and nut. The 2-pin charger tightly fits to the oval part, this part can slide off easily to take off when traveling.
Amazfit Active 2 Charging Watch Stand A minimalist charging stand designed specifically for the Amazfit Active 2 . The stand keeps your watch at a comfortable viewing angle while neatly hiding the charging puck inside the base. Two…
