Counting matching models…
I had old utility blades with no usage laying around until I found this awesome design . I thought a few improvements could be made, so I changed the design a bit and added “grippy” features and “clicky” flexures. You can find a video of…
Cute low poly bambi, sniffing curiously upwards. I recommend supports in the belly area and between the legs (as it is integrated in the gcode file). From the belly up you can print without supports.
Print approx. €4.09–€5.00 excl. taxPreliminary estimate for one variant
Update #1: I added a smaller cap, I think the device looks better with it. I love this vape mod! =) Optionally, there is a cap that greatly facilitates battery replacement, you can use it separately, but you can stick it on if you want.…
Print approx. €1.76–€2.16 excl. taxPreliminary estimate for one variant
Print it with 0.15mm layer hight and black matte PLA. The notch simplifies installation. This makes it easy to screw in. Use at your own risk.
Print approx. €7.69–€9.40 excl. taxPreliminary estimate for one variant
Scarfring or neckerchief based in a "Fire" guide badge (for WAGGGS leaders)
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
This clamp prevents rattle from the drip-tray on the Sage/Breville Bambino plus. Easy to remove for cleaning the drip-tray. I printed this in PLA
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Thanks to CT_9902 for the original model . Recommedations: Print with around 30% infill with two different colors and consider enabeling ironinng for a better finish. And to achive smooth rotatin lubricate it with liquid hand soap where…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
CW Iambic Paddle (3D Printed) This is a mostly 3D printed CW iambic paddle that works well for everyday use. It’s not a high-end metal key, but it performs reliably and is a solid option if you want something simple, affordable, and easy…
Print approx. €3.79–€4.63 excl. taxPreliminary estimate for one variant
Coaster for drinks with Bambi design. 95mm square, 1.8mm thick. You will need to add a layer change to get the two colours when you slice it. Prints fine in PLA with 0.4mm nozzle, 0.2mm height. I used 15% infill.
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
A wall-mounting bracket for the Ambient Weather Outdoor PM25 (PM2.5), which for some reason ships with screws but no mounting holes. The sensor simply slides in/out of the top for periodic recharging. The bracket uses the side lugs of the…
Ford Focus MK4 brackets to stick the Aliexpress ambient footwell LED's on. The brackets will fit into the original mounting positions where normally the factory ambient lights will be installed. Somehow left and right have a slightly…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
High-quality keycap featuring a character from the Roblox mini-game RIVALS . I recommend a nozzle size of 0.4 mm with a layer height of 0.1 mm (DETAIL) .
Print approx. €0.27–€0.34 excl. taxPreliminary estimate for one variant
A hand drawn design for a keychain spelling the name Nina when read both ways
It is a karambit that is in a shape of a dripping thing
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant
First time to design myself something that I could print with my 3D printer. The assembly does not require metal sprocket or rods. The hinges are built on PLA filament; the ends are melt with a soldering tip. My key is slightly loose, and…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
🇮🇹 L'Organizer che si adatta a te, non il contrario! ✍ Ho progettato questo organizer modulare partendo da un problema comune: la maggior parte degli accessori da scrivania è pensata per destrimani. Ho voluto creare qualcosa di veramente…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
I broke the cleaning tool for the steam wand on my sage bambino plus, so I decided to make a new one. Printed mine in PLA but would recommend to print it in PETG. I have uploaded g-codes for both PLA and PETG with 100% infill to make it…
Print approx. €0.41–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
Ricambio Tappo Gangio Tendine
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Questo simpatico soprammobile è l'ideale per fare un regalo carino e simpatico ai propri amici. Da stampare in PLA o PETG: -Usa i supporti organici dal piano di stampa -Usa un riempimento del 15% da 0mm a 2mm e poi aumenta a 50% fino alla…
Print approx. €3.92–€4.80 excl. taxPreliminary estimate for PETGSource material: PET
This is a 3D model for the CS:GO Karambit knife. The model is 1:1 scale and is 19 cm (~7.5 in) long. The download contains 3 different models, including the full body, and two different split version. If you have any problems, contact me.…
Karambit knife with a lot of details. Printed on MINI, 0.2 layer height, supports
NEW FIXED FILE !!! This was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
So, I got a little side-tracked and designed this, hope you like it!
Karambit split into three separate models
An minimal yet elegant combat Karambit knife. The Finger cutouts use the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5 15.7 0.785 or…
Available also on Makerworld: click Keyrambit Keychain This is a keychain spinner inspired by the karambit knife. It requires a 6803 (61803) bearing to function. It is a great way to fidget and relieve stress, and it can also be used as a…
A karambit I derived from another model. The two halves can be glued together with or without pins, but the pins will make guiding the two halves together easier. I DID NOT MAKE THE ORIGINAL DESIGN.
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Description: Elevate your fidget game with a 3D printable Folding Karambit Knife Fidget Toy! This unique creation seamlessly combines a sleek design inspired by a CRKT style folding Knife with the satisfying functionality of a fidget toy.…
Popular well with CS2. I also created a remix where the blade can be printed separately. Without AMS.
Edit: Added version for more common 2-notches 61mm/2.4inch blade. Whole thing is slightly bigger but it still fits nicely in the hand. My remix of super cool design I found here on Printables:…
Self modeled in Fusion360 off screenshot from a Karambit blue gem in CS2, enjoy!
Keyrambit for 6803 ZZ or RS bearings Material: PLA SILK DUAL COLOR ( RED and BLUE ) ERYONE Others: 6803 ZZ bearing 26x17 Printer : Anycubic Kobra 2 PRO
Fast and easy to print, the bearing needed is 61703ZZ 17x23x4mm, I ordered mine here: https://aliexpress.com/item/32816178869.html the bearing fit is tight so use something hard to press it in
First a little explanation: Subitus means impromptu in Latin. Karambits are a type of Indonesian martial arts knife. Disclaimer: Karambits are very dangerous and (quality) utility knife blades are razor sharp . Even if you are an…
My version of 3D Printable Folding Karambit Watch the video: youtu.be/GuLe6meCFzg I was inspired by Koss video: youtube.com/watch?v=JAw94JMxOrc BoM: 4x Door handle screws, 8x M4 washers, CA glue. If you don't have door handle scerws you…
Introducing the remarkable 3D-printed Karambit Key Spinner, a fusion of functionality and aesthetics that seamlessly combines the practicality of a keychain with the mesmerizing charm of a spinner toy. Crafted with precision and…
Karambit CS:GO Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.12 Infill: 25% Filament: Smart materials PLA Black and red Category: Toys & Games
Printed with 0.2mm layer height.
The source marked this model as adult content.
Length - 213 mm Handle length - 140 mm Blade length - 50 mm Blade holder thickness - 5 mm Knife thickness - 17 mm Lock type - Back lock Print settings: Infill -100% Material - ABS plastic Layer height- 0.2 mm Print speed: 50 mm/s Screw…
Brief History of the Karambit: The karambit was originally an agricultural implement designed to rake roots, gather threshing and plant rice in most of island Southeast Asia. It's a smaller variant of the Southeast Asian sickles. It still…
UPDATE 25/08/2026: Updated description. UPDATE 7/08/2026: Removed old files. MAJOR UPDATE 16/07/2026: 2.0 out now, no supports and better looks. SUPER SMALL UPDATE 22/03/2026: I've changed to xtrud3r, or x3 for short! Also changed the…
You have to print it in 2 parts and then fit it in the fall, you have to pay attention that when they fall into your stack, they fit together carefully, so you don't even need glue, because if it breaks, it can be replaced.
Just add 61704 or 6704 bearing and you are ready to spin!
Simple karambit fidget toy, not sharp, not pointed, no gluing and no support necessary. --- Einfaches Karambit Fidget Toy, nicht scharf, nicht spitz, kein kleben und kein Support notwendig.
Printed at 0.2mm layer height with a 0.6mm nozzle on my MK3S
This project is a remix of the Valorant Velocity Karambit by MaitreLancelot on Thingiverse ( https://www.thingiverse.com/thing:5198504 ) This project was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot…
3D model of Karambit, in parts so you can print easily
Things you wanted to know before: Be aware of the effort involved in this project, you can't just put everything together in 10 minutes. You should also be good at soldering and know how to handle cables. It took me about 3 hours to…
Just simple Gravity Karambit Knife Fidget Toy. Need 5 M3 12 bolts to assemble. Some glue for blade.
Banana Training Karambit. Print with a good amount of infill for a nice momentum. Have fun printing.
The print consists of two parts. Print them separately and slot them together with some glue.
See Original : https://www.thingiverse.com/search?q=foldable+karambit&type=things&sort=relevant Print Settings Printer Brand: FlashForge Printer: Adventurer 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: KCamel PLA Black…
This karambit utility knife prints in one piece and requires a razor blade and two M3 button head screws . Use the techniques shown in this video to produce different designs! If you are looking for a compact utility knife, check out my…
The karambit is a traditional knife from Southeast Asia, featuring a curved blade resembling a tiger's claw. Initially designed for agricultural use and later adapted for martial arts such as Silat, the karambit is ideal for…
I have printed the original from Dani Projects and as I wanted to glue the handles together, they wouldn't close fully. So I added some distance (total 1,2 mm) to them and it worked like a charm with no need of cleaning up. Use supports…
This remix of Dani Projects' Karambit Knife streamlines the printing process, especially for multi-color printer setups. It combines the original parts into two, a half-knife and a half-handle, enabling one-shot printing without…
I now als designed the knife in two pieces so dont need as much supports as before
I used no supports. I split the model into two parts and then glued them together.
so this is a folding karambit, credit to Biobernhard (thingiverse creator). i found this model online and re edited it to be able to be printed in separate colours, only requiring a little super glue to keep them together. ill try to find…
This is my take on an Iambic Paddle for CW (Morse Code) Operation. It takes inspiration from the CWMorse Pocket Paddles but is smaller and can be made at home! I Recommend printing this in PETG for durability, but you can print this in…
Clicky karambit, but with no overhangs. I highly recommend using the 3mf with negative parts for the M3 nuts to recess into. I exported it from Orca Slicers, and it unfortunately might not work in Prusa Slicer.
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Foldable Karambit with locking mechanism. Print settings: Infill -100% Layer height- 0.2 mm For clean top layer turn on “ironing” M3, 14mm x 3 for spacer and blade lock M3, 12mm x 1 for blade holder Add 4 more washers on the cap head side…
I recommend using gold colored filament and later paint the print with silver/grey and black color.
Handy box cutter or decorative karambit knives - available in 2 sizes - 10 gram prints
Designed after Easy-Bot-3D's AAP-01 Charging handel to make it one sided. It has the option to use a m5 screw to secure it onto the pistol, however in my testing, its a snug fit and should stay on without the screw. This can be used for…
A fun little twirly whirly Utility Knife A upgrade to my previous Mk3 knife. this has improvements around the blade for better hold and safety, Handle MK4 is 7mm thick whereas the Handle MK4.2 is 6mm thick Please use it safely and don't…
https://stllink.pages.dev/
Print with a smaller layer height if you are interested in an improved blade surface.
Keyrambit for 6803 ZZ or RS bearings Material: PLA SILK DUAL COLOR ( PURPLE and GOLD ) ERYONE Others: 6803 ZZ bearing 26x17 Printer : Anycubic Kobra 2 PRO
2D artwork of Thumper from Bambi Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
The model doesn't need any hardware to assemble. If you want a stronger bind, you can glue the pins to each other as shown in the pictures. Print settings: PLA 5% infill gyroid prusa mk4s For the model you need to download each STL file.…
Keyrambit for 6803 ZZ or RS bearings Material: PLA SILK DUAL COLOR (BLACK and GOLD ) ERYONE Others: 6803 ZZ bearing 26x17 Printer : Anycubic Kobra 2 PRO
Bambi Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab so that…
There were some problems with the original, so I fixed them Category: Video Games
This is my Ambiguous Cylinder Generator to create Illusions based on the "Ambiguous Cylinder illusion" by Kokichi Sugihara. Use OpenSCAD to customize to your liking! Have fun and share a make if you print one! Changelog: v1.4: Presets for…
Available also on Makerworld: click Keyrambit Keychain This is a keychain spinner inspired by the karambit knife. It requires a 6803 (61803) bearing to function. It is a great way to fidget and relieve stress, and it can also be used as a…
A Minimalist Karambit Knife with a small blade. The Finger whole is the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5 15.7 0.785 or…
Remix of newman13f's model with a wider hole which fits stock 54mm portafilter of Sage/ Breville Bambino/ Bambino Plus. newman13f does not seem to have a printables account though.
Customizable Triple Letter Blocks Ambigram This is a 3D ambigram made of letter blocks that are each shaped like three different letters when viewed from three orthogonal viewpoints. You can create your own with the customizer using…
Made a simple karambit because I wanted to try making something with the bearing I had left. Used a 6704 bearing or the equivalent to it with 20mm inner, 27mm outer and 4mm thick dimensions. Recommended build space 200x200x10
Editing my model in 2 parts so that the blade can be printed separately.
Bring the ultimate flex from Roblox Rivals into the real world! This is a 1:1 scale, highly detailed 3D printable model of the iconic Gold / Champions Karambit. Designed with a clean, low-poly aesthetic that perfectly matches the game's…
Description This is the SA-3 Mozambique, a pistol-sized shotgun present in Apex Legends (and previously in the Titanfall series). Print instructions Print with your prefered settings. Don't forget to add support. Note : multiparts…
I was thrilled by Reven's Portafilter holder for Baratza Encore but I found my portafilter was too small, tweaked the design of the holder piece to fit it. Go get the other parts from their project!
The paddles I've created differ slightly from the design that I Remixed. These paddles use bearings for less friction, and the return tension is created with magnets instead of a spring. I have uploaded a PDF with step by step…
Here are four different mounts for Philips Hue Gradient Ambience Lightstrip. First one is a loose fit and the second one is a much more tighter fit. The other two mounts are the loose fit, but with an 30 or 45 degree angle. These mounts…
¡Descubre la navaja KARAMBIT plegable, la herramienta perfecta para tus aventuras de campamento! Con su hoja curva de alta precisión y diseño compacto, esta navaja ofrece máxima versatilidad para cortar, rasgar o desollar. Su mango…
