Counting matching models…
Getafix, or Panoramix, a cartoon character in the French comic book series Asterix. Getafix is the village druid in comic book series Asterix. He is known for his strength-enhancing magic potion. Aside from making potions, he also acts as…
Sickel This is a sickel modelled after Miraculix / Getafix / Panoramix from Asterix the Gaul. It looks like on the cover of The Golden Sickel ! https://www.youtube.com/watch?v=8m1kYK\_U66I Print Settings Printer Brand: Ultimaker Printer:…
EDIT: Please make sure that this is the wrench that fits you blender models. Other users posted variations that fit newer Vitamix blenders. This thing is a tool I used to replace blades on our Vitamix blender. It's a remix of another…
Someone on Facebook asked about a file for a Vitamix tamper. Probably should be coated with a food safe resin. I made it in two parts with a screw connector for ease of printing.
I needed a tamper holder for my Vitamix A2500 to keep it tidy. I found the linked thingiverse model, but I wanted to make some changes. Unfortunately they only had a STL file, so I needed to remodel it to make the changes. So that this…
Wall bracket to keep order for your Bamix with accessories
Tired of a bulky, hard to use Vitamix smoothie cup? Don't have kids or pets? Boy do I have the solution for you. The Ascent series of Vitamix blenders use NFC to prevent an exposed blade from spinning without the cap. Every other Vitamix…
Midway Amix Pro electroscooter screen holder Крепление экрана электросамоката Midway Amix Pro. Штатное крепление у всех быстро лопается (у меня всего за один сезон). Пришлось делать замену. Всего должно быть 5 деталей (с прокладками 7),…
We like to make smoothies w/ our Vitamix using the “personal cups" which screw on to an adapter base that contains the blades. The gasket (or o-ring) on our adapter has become stretched over time and doesn't always make a good seal when…
Replacement cap/plug for a Vitamix Blender. This is the plug that seals the hole in the top rubber cap. Changes include: -Reworking of the size of the outer ‘grip’ area to eliminate overhangs, and to reduce the height of top grip and…
Wall mounting holder for a VitaMix blender tamper. Prints just fine in PLA. Includes Fusion360 file if you want to change the screw holes, spacing or whatever.
Dynamixel Mounting Plate for XL430 motors
Blade replacement wrench for Vitamix Ascent series containers.
I was always annoyed that with the Vitamix Nutrion / Smoothie Maker & Blender, the remains of the mix under the knife are very difficult to get out, especially when the consistency is a little firmer. That's why I scribbled out a quick…
Adapter for Dynamixel XL430
Found this model on Thingiverse and uploaded it here after I successfully printed and used it myself. Printing Notes I printed this with 3 perimeters and 50% (gyroid) infill to make it strong. Fitment Notes Some people on Thingiverse said…
Lost your Vitamix cap? Most replacements online didn’t fit quite right—many are perfectly round and don’t match the original shape. This version is designed with the correct square form and gently rounded corners for a snug, press-in…
This wrench can be used for removing the blade assembly from a Vitamix blender for the purposes of cleaning or blade replacement. I printed this out of PLA with 5 layers shell for added strength and 15% infill, but PETG or other materials…
A simple but effective adapter to connect Lego Axis with a Dynamixel servomotor. To properly put the Lego axle you will yo apply some pressure (some knocks with a hammer for example) Category: Robotics
I once downloaded a neat box as I could not design myself. Now i wanted a better box for my bamix hand blender to store the add-on tools in.
Wall mount for Vitamix 5-Speed Immersion Blender. We store the blender sitting on its blade-end with the protector in place, but it was not totally stable especially if it was bumped in the cabinet. This model keeps it from tipping over.…
dynamixel xl430 Servo coupling for niryo one
Snaps on and off mixershaft easily and stores 2 Bamix tools. Store the 3rd one on the mixer itself. Printed without supports in 2 parts. Attach together with an M2x8 bolt. Optimized for printing… No supports. Split in 2 pieces so both…
We bought a used Vitamix 3600 Plus and the gasket for the lid was deteriorated, so I designed and 3D printed a new one out of rubber! Print instructions Category: Kitchen & Dining
Print sapmples of all your colors and materials, based in the 3 models that are remixed here Edit: Remix now with print in place box for 22 diferent samples (cant change the license tipe dont know why)
Handle for the Damixa Series 32 water faucet so its possible to open the faucet using your wrist and dont get nasty greasy hand on the faucet knobs ;) The ends are left open so thats its still possible to see the colors on the faucet that…
These are drawers to be used on Filamix spools
Bambu Lab PLA Bambu Green Getafix - Panoramix : https://www.printables.com/model/1409227-getafix-panoramix
My wife picked up a Vitamix 5200 at a garage sale. It was missing a rubber foot. This is a model for a front foot of a Vitamix 5200. I printed it in Flexfill 98a
This is a presser for the Vitamix 3600 Plus, we bought a used one and it was missing, so I made one instead! It is just short enough that it will not touch the blades on the inside Print instructions Category: Kitchen & Dining
This practical holder can be mounted, for example, on the inside of your pantry door. Your Bamix stick blender will have a new home for itself and its accessories!
Hold dat Bamix up on the wall. Files for both shelled & solid (to print with infill) versions - see attached images to see difference. Shelled may need supports.
This goes on the bottom of a Vitamix blender to protect the bearings while upside down in a dishwasher. If you don't protect the bearings when it is upside down the bearings will rust and become faulty. This is printed in sainsmart TPU…
Tired of getting your countertop scratched when using the Vitamix FC-50 container as a compost bin. Try out this coaster that is custom sized to the bin's bottom at 6.5" plus a .25" rim to hold it in place. Let your compost coast!
I needed a new foot for my blender. This one does the job. It fits in my model vm0103 blender just like the one I lost. I don't know if it is compatible with other Vitamix appliances. Print settings FIlament: TPU Supports: No Brim: No…
Something I could not find so I drew it. Dynamix Cat5e coupler with panel housing. Category: Electronics
Bracket adaptor for mounting a PiCam V2 onto a Dynamixel digital servo
Puzzle remix by the respected Marcell Mágori who posted it on www.thingiverse.com. Since I did not want to look for the core from the desired 2x2x2 cube, I drew this puzzle already with the core. The core of this puzzle can be printed out…
I created a Parallel Rack-and-Pinion gripper using a singular Dynamixel XM430-W210-T gripper for easy pick-and-place operations. Upon request, I will be happy to provide editable models for the enclosure. Item Filament Supports Brims…
📜 Descrizione Questo componente è un ricambio compatibile per il frullatore a immersione bamix Gastro 350 . Serve per collegare la parte motore all’asta in metallo del frullatore, sostituendo completamente il pezzo originale. Il modello è…
Mount to hold Vitamix Mini-Tamper and Low-Profile Tamper horizontally. Most mounts I found held the tampers vertically but I needed to mount it horizontally. I made it to attach simply with Command strips, but the STEP is there if you…
Nut/tool for removing the blade assembly from a Vitamix Ascent container. Use with channel lock pliers or big wrench
The handle makes it easier to turn the water on and off with less force in your hand.
This roller binding replace the original for Orgamix storage tower.
Replacement Vitamix TQO Motor Plate Gasket Service Kit - 060065 Printed with TPU 95A 15% infill
📜 Descrizione Questo componente è un ricambio compatibile per il frullatore a immersione bamix Gastro 350 . Serve per collegare la parte motore all’asta in metallo del frullatore, sostituendo completamente il pezzo originale. Il modello è…
Bambu Lab PLA Bambu Green Getafix - Panoramix : https://www.printables.com/model/1409227-getafix-panoramix
A coworker of mine asked if it would be possible to make a replacement for the broken bowl. and indeed it was. came out top notch. made Fusion 360 and printet in Bambu Pla
This holder allows for quick and convenient access to your tamper. This fits the Vitamix Explorian series of blenders and press fits into the base. You could use a drop or two of hot glue to fix the holder to the base of the blender. The…
Snaps on and off mixershaft easily and stores 2 Bamix tools. Store the 3rd one on the mixer itself. Thanks to @WoutDR for the original model!
Fits a Vitamix Ascent container for removing the blade assembly. Printed in PLA+ with 20mm M3 screws used for extra re-enforcement against shearing - but probably wasn't needed. Rather than printing the part with a handle, I opted to use…
Showcase your favorite memories with this elegant, heart-shaped photo holder! This design is fully parametric and optimized for support-free printing . Whether you have classic Polaroids, Instax Minis, Instax Wides, or a custom photo…
I used .28 layer height with standard Cura settings, just the speed set to 60. In the .stl file I used CHEP`s fast profile for Cura, it takes 7 hours to print.
A mount to hold the Vitamix Classic Tamper. Designed in TinkerCAD. Category: Kitchen & Dining
Bamix hand blender wall mount including cable holder Suitable for mounting with countersunk wood screws. Material: PLA Layer height: 0.2mm
I recommend hand washing only for this part. I printed mine in ASA, but there may be some higher temp filaments that could survive the dishwasher.
Remix of https://www.thingiverse.com/thing:5379818 Replaced the original model mounting bracked with screw holes like the original mount Added a plug-holder for cleaner look Printed with 0.2 Layer height 4 walls and 20 gyroid No supports…
