64 models
Molle lighter holder for backpack belt, etc. Molle držák zapalovače na batoh opasek atd.
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
I created some fishing lure holders for my 3 most used Rapala sizes and a spinner one. All I did was use 3M tape to hold them in place on my boat. So far no issues. I made them thicker at first to make sure they held up I might do a V2…
Print approx. €2.56–€3.12 excl. taxPreliminary estimate for one variant
Studenti si jednoduchým pokusem ověří přítomnost povrchového napětí v kapalinách
Print approx. €1.89–€2.30 excl. taxPreliminary estimate for one variant
Studenti si jednoduchým pokusem ověří možnosti změny povrchového napětí v kapalinách.
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
der Löwe erhielt das Gesicht des Robo-Alpaka und eine flauschige Mähne
Print approx. €5.16–€6.30 excl. taxPreliminary estimate for one variant
This is my attempt at Jaro Tapal's Lightsabers from Jedi: Fallen Order. If you want a double lightsaber print two of the saber emitter and two of the saber hilt as well as a connecter piece. If you want the broken saber just print one of…
The lightsaber first used by Jedi Knight Jaro Tapal but later used in a broken form by his apprentice Cal Kestis. Right now I just have the pommeled version of this saber, later on I might work on the torn grips for it. If you are wanting…
A plaque for the eagle napalm strike UPDATE 3/4/24: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more accurate…
This custom saber was inspired as being somewhere between Jaro Tapal/Cal Kestis's and Ezra Bridger's third lightsabers with a few custom additions in between. These parts compatible with this modular lightsaber and several of my other…
wanted to remake my old version of this. split up into sections and reinforced with a 1/2 rod. there's the double and broken version. Category: Props
Lighter holder of normal dimensions on molle straps. Držák na zapalovač běžných rozměrů na molle popruhy.
vhodne pro stare ceske motocykly do kastliku. model udelany podle ceskoslovenskeho originalu. vhodne pla, petg.
I elevated the areas that need to be white so that you can preform a color change at that layer. I Printed the 500KG Bomb remix I did (same thing just different plaque) with my Ender 3 V2. With a .2 layer height Black: Layers 1-23 Red:…
Žáci změří hustotu různých materiálů filamentů. Vypočítají, navrhnou a vytisknou těleso na principu karteziánského potápěče. Zmňenou tlaku budou ovládat stoupání, klesání a otáčení tělesa v kapalině.
TinyMtn Free Pack 5 - Hawaii This is a package with 3D model files for four notable landscapes in the state of Hawaii, USA. Mauna Kea, 13,796 ft / 4205 m Mauna Loa, 13,679 ft / 4169 m Haleakala, 10,023 ft / 3055 m Napali Coast Each…
I hated having to find my pliers after landing a fish so I designed this belt holster for my Rapala Fisherman's pliers. Has great retention but the pliers can still be removed and reholstered one handed. Printed at 0.2mm layer height with…
Recommended print parameters: print profile and layer heigh: 0.2MM QUALITY infill: 50% perimeters: 2 Doporučené tiskové parametry: tiskový profil a výška vrstvy: 0.2MM QUALITY výplň: 50% perimetry: 2
využití: k nalévání tekutin do malých otvorů
designed to fit a 3 inch carboard tube in it. handles uses a bit of 1/2 in rod. split for printing, about 6 bed plates. Category: Props
This pen holder is inspired by the iconic papal robe, reimagined as a clean, stylized desk object with a playful yet respectful design. The model features the traditional white garment, buttoned front, shoulder cape, and a central cross…
Rapala Touch Screen Fish Scale holder with slot for pliers.
zapalovací svíčka, lampička spojení na závity
A beautiful minimalist painting of a Lighter on the wall. Size 183 x 200 mm Check out my other creations and don't forget to follow me so you don't miss any news. You can support me by buying my premium print ↓…
To connect two broomsticks one after the other. It is useful to get a long pole, using pre-threaded broomsticks that are sold in any store. It can be reinforced by gluing toothpicks to the sides, or without gluing, if the filament is…
Také sbíráte zapalovače Clipper a máte jich už tolik, že by jste s nimi mohli vytapetovat místnost? Tato na zeď šroubovatelná lišta vám to umožní. Na jednu jich zavěsíte 9 a díky důmyslnému designu se dají jednotlivé lišty spojovat do…
Víčko nádržky brzdové kapaliny KIA SEED s logem KIA GT
Tisknout s podpěrami / Print it with supports Originální barva je černá / Color of genuine part is black
I made this piece to carry my Micro Fpv drones on my skateboard backpack. I quickly realized how useful it was so I made a smaller one to fit my side straps as well, along with a “Straight” version where both straps run parallel. I use…
car socket; autozapalovač; autozásuvka; 12v/24v super příprava děr 20,5mm
Step into the TARDIS with this commanding 3D printable figurine that captures the intense presence of the Twelfth Doctor in stunning detail! This meticulously crafted STL model showcases the iconic long coat, fitted trousers, and…
Printing the complete heraldry version in parts is not possible without editing because different parts are available. These files are primarily for previewing the final result. Depending on the piece, supports may be required. Any…
EN I needed some kind of holder for my liquid flux bottles. Nothing fancy. There is a room for 12mm width Dymo tape so you can make sure where is what. CZ Potřeboval jsem jednoduchý stojan pro 3 lahvičky pájecí kapaliny. Nic složitého. Je…
kryt zapalka pro tahostart z činskeho křovinaku tištěno z petg prusha ideal by byl PETG-cf/GF
The Papallesi are the inhabitants of the planet Papalla. They were created by Armando Testa and his Agency for a series of episodes to promote the electronics company PHILCO in 1966 A friend asked me to find a model, but I had no success,…
Dvarapala – The Temple Guardian of Pairi Daiza This impressive stone guardian, located in the Indonesian area of Pairi Daiza, represents a Dvarapala , a traditional gatekeeper deity found at the entrances of Hindu and Buddhist temples…
podstavec/držák tryskového zapalovače. Pro průměr 29.7mm. Pokud patříte mezi kutily či tiskaře kteří používají tyto malé tryskové zapalovače a vadí vám jak se neustále převrací nebo padají, tak pro vás mám držáček který tomu zamezí.
Without supports!!! For Skoda, WV, citroen…
Lighter holder for Skadis system. Fits a 31mm diameter lighter/burner. Uchwyt na zapalniczkę, do montażu w systemie Skadis. Pasuje do zapalniczki / palnika o średnicy 31mm.
one of the largest known ancestor of todays racoons and this model is ready for everyone who wants to see it Category: Animals
Introducing custom-designed 3D printable lens hoods for the Papalook PA930 webcam! These lens hoods enhance your webcam's performance by reducing glare and minimizing lens flares, ensuring sharper and more focused images. Tailored to fit…
Designet for hold classic gas lighter on gas burner bottle. Navrhnut na držení klasického plynového zapalovače na plynovém hořáku. O ring (24x3,4)
Perry Rhodan series that were published in the 60's (Over 3.000 books of approx 70 pages comprise the epos). More infos under https://www.perrypedia.proc.org/ The Skapalm barges serve as spaceships for the column anatomists and are…
Simple adapter to allow the use of micro cameras in the 4" Armattan Japalura frame. I've included the STL and the Fusion360 file if you want to tweak it for your use. The length will just barely keep the camera behind the roll cage so it…
Nálevka pro chladící kapalinu pro motorku - stačí nasadit otočit a drží sama. Podpěry stačí dát na horní vnitřní zub.
As imported from Thingiverse: Summary To level the bed I had to turn the screw from above and hold the lower wing nut with the other hand, or hold the screw from above and turn the wing nut below. With this little part you will only need…
Stojánek na pájecí kapaliny F1, který je umístěný ve vozíku s nářadím a měřícími přístroji.
Helldiver 2 stratagem key cap for a mechanical keyboard.
A replacement locking cap for Rapala RapStack Storage Boxes if you accidentally broke it like me 😔. It works on both the deep or shallow version of the Rapala RapStack storage boxes.
uchwyt na zapalniczkę 30mm
A Apallie. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toys & Games
V hodinách fyziky vznikl návrh na tvorbu 3D modelů pro Pascalův zákon a spojené nádoby. V hodinách IKT žáci tvořili modely pro dané úlohy. Tisk probíhal na tiskárně MK3S+.
Standard Bambu Labs print settings. No supports required! Pinball add-ons are all press-fits and the board layout is reconfigurable! Slot is added for an acrylic sheet to be press-fitted in, but this is not necessary. You will need a…
map of Papal States (1859-1870)
Molle lighter holder for backpack belt, etc. Molle držák zapalovače na batoh opasek atd.
This pen holder is inspired by the iconic papal robe, reimagined as a clean, stylized desk object with a playful yet respectful design. The model features the traditional white garment, buttoned front, shoulder cape, and a central cross…
vhodne pro stare ceske motocykly do kastliku. model udelany podle ceskoslovenskeho originalu. vhodne pla, petg.
A Apallie. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toys & Games
A clip I designed to fix the motor cables to the drone's arm. Category: R/C Vehicles
