Counting matching models…
A full range of seed starting trays inspired by the ones sold by Charles Dowding and Epic Gardening. I designed this set of trays from the ground up for 3d printing and made sure that all the overhangs were vertical enough to be easily…
Karting spacer tool very handy. Use an O-ring in the back to prevent the tool from sliding out! Print: Material: PETG, could work with PLA. Standard profiles in slicer very simple.
Use PETG/0.28/Supports Made for original Polini air filter pipe
Modelo creado para poder poner todos tus legos f1 como si estuvieran en la parrilla de salida . No es necesario el uso de tornillos para su montaje esta diseñado para poder pegarlo con cinta adhesiva o cinta de doble cara. Existen dos…
These are designed to tamp down the soil in square seed starting trays. 2026-02-08: Added 1.5 inch round tamper for starting seeds using cardboard toilet paper or paper towel tubes.
A new 3D figurine generated by AI, a Chibi Karting. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
I wanted to convert a distribution powerbrick from Harting 16 into Powercon true with loop through. This was easy after rewiring the thing this plate was alrready printed the thickness of the plate was required for the screw length in my…
A small modular seed starting pot, designed for a cover to be fitted into the slots on the side. I have not fully finished designing everything thing yet but once I do, I will upload all of it. The plant pot can be used individually or in…
a tray to put water and the pots in to self-water them. i recommend you use ASA for outdoor use.
This spacer is easy to place behind oven knobs, preventing your kiddos from turning the gas on and burning the entire house down. Disclaimer: If these spacers don't fit properly, it may still be possible to turn on the gas. This solution…
This is a ¼" ID karting Fuel line plug for keeping debris out. Printed in PETG (Tested in submerged gas for coming on 3 weeks and is fine), ASA may be best for the longest term solution. Printed at 45 degree angle for strength. 0.16 layer…
A tray and starting components for Pandemic Legacy Season 0.
This voluminous UPGRADE SET for your Traxxas TRX-4M and its trailer (#TRX9795) includes the following: (Please have a look at ALL pics to get an overview!) CASE BODY WITH SLIDING DOOR Slip-on trailer case body with sliding door for the…
1/64 scale racing starting grid. Has indents to center rolling cars. AMS required. I printed at a 45 degree angle so the lines are parallel. Can also be flipped over and printed upside down for a textured finish.
This model is compatible with the lego system.
This is a coverplate to close off the output or throughput of a Harting HAN 10 socket. I'm sure it works on the input as well, but then my lights wouldn't turn on anymore :) Place little supports under the latching pins.
Saw a video of a similar hair parting tool called “The Braid Aid” by “AB Glitz” and thought this should be easy to model and print. Prints in two pieces for stability reasons. Just superglue them together. Print orientation can be seen in…
A simple rack that holds hydroponic tower grow cups upright while establishing roots in a seed starting. Blacks out the water area underneath of the tray to discourage algae growth. Once the seedlings are established and there are roots…
simple bin to hold the “Greenjoy” seed starting deck. if your printer mess up and created some gaps, you can simply rub and melt some wax on the inside part of those problematic area. sponge holder tray from darkcody :…
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/h8HdMZiReGc
This model is compatible with the lego system.
This model is compatible with the lego system.
See https://www.printables.com/@Dom360/collections/1929103 for more gravitrax junior pieces
Quick-change holder for the AIM Solo 2 lap timer. It features four magnets — two for the steering wheel (25 mm) and two for the lap timer (20 mm). It is designed to be attached to a karting steering wheel with a single screw (13 mm head).
Parametric Parting Off Tool for lathe using spring. !!! be aware:!!! I have made so far the tool for bladeType=bt_HBM_1_5x8_25x73 from metal with wPartingTool = 11.6 I have made so far the tool for bladeType=bt_HBM_3_32x1_2x4 from metal…
Toilet - FARTING ROOM right side - sign, easy to print
Print with only one wall, the tinner the better, roll up newspaper and then fold the bottom
I needed to adapt the Go Kart for a 6-year-old child and by making this extension plus a lower footrest we were able to do it. Pedal extension for a Go Kart, pedal tube diameter 14 mm, extension 60 mm and 20º. Printed in PLA PLUS…
Трофей на картинг пистата в София - Красна Поляна
A martingale for old foil / sabre body cords. Print info: material: PLA color: black nozzle: 0.40mm layer height: 0.2mm support : yes, tree for legs (due to efforts) filament: 2.00g time: 17m47s Sliced with BambuStudio and printed on a…
Rain hood to keep the air filter protected and dry when racing in the rain or on the ice. I use this on my ice kart and it seems to work okay when printed in PETG. The ring slips over the back of the filter and the cover snaps on. It has…
Includes: To save material and time, print trays with a single perimeter. 48 Cell Tray 24 Cell Tray 12 Cell Tray The legs will need a little more structure to print properly. 5mm Leg Spacer 10mm Leg Spacer 15mm Leg Spacer 20mm Leg Spacer…
Tired of having your spare karting axles end up in a different location to where you packed them? Buddy-Up your Axles with "Axle Cuffs". Secure each axle with a partner and stop them from escaping their designated location in your lock-up…
The Seed Starting Soil Presses in this design are used to help in planting seeds in multi-cell seed starting trays. The three sizes of presses in this set cover many of the tray sizes commonly used in seed starting. The presses will make…
Wall mount for the new Speed Champions F1 sets. It resembles a starting grid:)
This seedling tray was inspired by the epic gardening 6-cell tray. It features 4 side slits per cell for air pruning and one bottom hole per cell for easy bottom watering and plant removal. Recommended materials: PETG, ABS, ASA or other…
A tourist attraction on your miniature railway layout. Dimensions Karting Circuit: 224 x 224 mm. The riding direction is counter clockwise. If you prefer clockwise, just mirror the Karting Circuit in your slicer. Printing I printed the…
Hideg indító kábel diselhez és kézi karburátorhoz. Pteg és TPU95A és bármien vezetákes kűbellel befűzhető, ideiglenes vagy helyetesítő pótalkatrész. 161711501/C https://www.heritagepartscentre.com/eu/161711501c-choke-cold-start-cable.html…
Schutzkappe für ein 26 mm hohes Abstechschwert, hauptsächlich um die eigene Hand zu schützen ;-) Für die Breiten von 1,5 mm, 2 mm und 3 mm. ……………………….. Protective cap for a 26 mm high parting blade, mainly to protect your hand ;-) For…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
A full range of seed starting trays inspired by the ones sold by Charles Dowding and Epic Gardening. I designed this set of trays from the ground up for 3d printing and made sure that all the overhangs were vertical enough to be easily…
Machine à laver Daewoo De dwd-ed1212 bouton d'allumage Print Settings Printer Brand: Prusa Printer: i3 MK3 **Rafts:** No Supports: Yes **Filament:** prusa filament PLA Category: 3D Printing
This model is compatible with the lego system.
Karting spacer tool very handy. Use an O-ring in the back to prevent the tool from sliding out! Print: Material: PETG, could work with PLA. Standard profiles in slicer very simple.
Use PETG/0.28/Supports Made for original Polini air filter pipe
This is a drilling template designed to help you easily install double or triple electrical wall boxes (68mm diameter) in plasterboard (placo) walls. It aligns perfectly based on the position of your first hole, allowing fast, accurate…
This is a drilling template designed to help you easily install double or triple electrical wall boxes (68mm diameter) in plasterboard (placo) walls. It aligns perfectly based on the position of your first hole, allowing fast, accurate…
Modelo creado para poder poner todos tus legos f1 como si estuvieran en la parrilla de salida . No es necesario el uso de tornillos para su montaje esta diseñado para poder pegarlo con cinta adhesiva o cinta de doble cara. Existen dos…
This is a model i made of the blue starting wand of the game Noita. I used a 30mm x 1180mm wooden rod as the core. I glued the pieces together using cyanoacrylate glue. There are two different crystals to choose from. The crystal in the…
The ring must also be printed with the funnel, it attaches to the bottom of the funnel to lock the part in place (Glue may be needed). This design took way more testing and redesigning than any of my other models, the main challenge was…
My wife and I love F1, and we wanted to make something cool for our toddler to play with that was F1 inspired - we came up with the idea of a sequence of red lights that mimic F1 style race-start lights. Alas, the internet could not…
Celebrate your best Karting victories with this Karting Cup Cookie Cutter! Print Settings Rafts: No Supports: No Resolution: 0.4 Infill: 15%
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
I make these coins almost every week to give to kids in Sunday school at church. Whoever is the teacher that week, sometimes me, can decide to give it to any kid for any reason. I usually give them out for memorizing a Bible verse,…
This is tool for trimming perfect shape of the starting shoe friction material. Print it from PETG 4 perimeters, 25% infill cubic. You need 2 steel shafts 8 mm h8 tolerance length 1x50 mm and 1x70 mm. 2x screw M5x20 mm 2x nut M5 Category:…
These are designed to tamp down the soil in square seed starting trays. 2026-02-08: Added 1.5 inch round tamper for starting seeds using cardboard toilet paper or paper towel tubes.
After printing the board overlays and a tray for the tiles, I needed a tidy way to store the factory displays, the scoring markers, and the starting player marker. So I made this one. This is a first draft. It works, but you have to tip…
A step file that represents half of a clip for an sn30pro. Mirror it for the full clip. I've included a folded print to test the fit on your device. By folding the clip it lets you print it with no supports.
This 3D-printed pickup height hooking gauge is a practical workshop tool for passive P-Basses (split-coil pickups), designed to set reproducible pickup height starting points without using calipers. It is not a “perfect setup” and not…
Based on the Epic Gardening Epic 6 Cell Seed Starting tray. Has ventilation slits on sides for root air pruning, hole in bottom for drainage and easy removal, and 6 cells for planting 6 individual plants. 12 Cells fit perfectly into a…
This deign happened because I wanted to make a more modular 72 plug system. The plugs measure 1.5 inches sq. at the top and tappers down to 1 inch sq. with a height of 2.25 inches. There is a model with air pruning and one without. Large…
These are mini garden tags I created for seed starting trays. It works perfectly for labeling your trays with whatever you are growing. I have also included a blank one to make your own I printed mine in PLA, and they held up just fine…
Shadowheart's starting gear mace from Baldur's Gate 3 for cosplay! This listing is for the digital .STL files ONLY. The mace measures approx. 80cm in length. You can choose between an option with a printed handle (with a 12mm internal…
I made this as an easily labelled mini soil blocking tray, but also starting just filling it with my seedling mix and then pricking the seedlings out and potting them up. It works fine both ways for me, and was water tight. I've only…
A new 3D figurine generated by AI, a Chibi Karting. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
I wanted to convert a distribution powerbrick from Harting 16 into Powercon true with loop through. This was easy after rewiring the thing this plate was alrready printed the thickness of the plate was required for the screw length in my…
A small modular seed starting pot, designed for a cover to be fitted into the slots on the side. I have not fully finished designing everything thing yet but once I do, I will upload all of it. The plant pot can be used individually or in…
This base was designed to fit on top of the makerbot sketch, which is an enclosed printer. I supposed it can be used with any flat object, however. I printed mine as half cut pieces then epoxied them together.
A reusable seed-starting tray with a grid of cells and drainage holes for raising vegetable, herb and flower seedlings indoors before transplanting — a tidy, plastic-waste-free alternative to disposable trays. Parametric: set the grid…
print with tree supports 0.2mm nozzle Printed in PLA 150mm's
I was looking for some entry and exit tiles to print for our Gloomhaven sessions but couldn't find any. Therefore, I created them according to the designs in Jaws of the Lion, Gloomhaven, and Frosthaven rule books. These tiles fit the…
I had made som larger signs, but concluded that smaller will do fine, especially handy when seed starting inndor. And it prints fast! Very easy to make new version in inventor simply edit the drawing for the ebossed text in the part. The…
We used Slicer Goodies on here to make the lettering and not sure where we got the blank plant label from. Hope every one likes it. Look at all the other plant labels in our collection.
This design is inspired by Epic Gardening and their Epic 4-Cell Trays. To view the product that inspired this visit: https://shop.epicgardening.com/collections/all-products/products/epic-tray-4-cell-garden-propagation-trays I couldn't…
For tube diameter 22.4 mm 2 socket head cap screws M4 x 30 2 lock nuts M4 ASA Filament recommended. PET-G will work too.
Print these two parts in different colors, stick (and maybe glue) them together and enjoy your flying rocket. Print with supports. The diameter of the plant hole ist 100 mm. Scale it up or down to the size you need.
Starting from an STL model of the left lens, build a parametric frame for your glasses using OpenSCAD. Hinge and temple design inspired from by u: erickso 's glasses but both redesigned from scratch in FreeCAD. * * * Rev.1: adding taper…
A gift box that parts into 2 pieces. Fun and completely useless. Makes a great punny gift for loved ones, friends and colleagues. Printed box halfs upside down. Printed bow parts on side. Minor glue assembly required. May be best to…
Another 6 colors 3D print .... with 6 ways Flux capacitor, MarlinKimbra (MKDuo),,,,,, printed with BFB 3000 IeC refurbished...."Alligator" on board.... ;) A dream for first race in Australia..... FORZA FERRARI!!!!!!!!!!!!! Formula 1…
Knowing that there are many people around who love marble racing I designed this starting gate as an extra part compatible with the Marblevator Starting gate in action: https://youtu.be/M8bvlDLAor8 There might be need to file the lever…
Simple dummy module for blanking a vacant position in the connector.
A remix of self starting siphon by dougfeig. This version is smaller and easier to print: 60° overhangs don't need support Triangular section assures a better adhesion on printer's bed Wall size optimized for 0.4 nozzle Have fun!
This is the house where you start in the game The Legend of Zelda: Link's awakening for the original Game Boy. I made this in 1997. I played the game a lot and I wanted to see if I could recreate the house as close as possible to the game.
A small pot for starting seeds. the raised base keeps it out of the water and also allows light to get to the base to stop the roots growing thru the mesh. Look at the 3mf file to see how to print the mesh. adjust the infill size to suit…
UPDATE: This is now an outdated model. I have created a new one that is much easier to print and also has a bottom tray to keep things neat and tidy. https://www.printables.com/model/639430-seed-starting-set-v2 These are a sturdy and…
I picked up a Pelican Case (iM2500) that I've seen at many surplus stores: These cases were used to transport Mechanical Ventilators during the pandemic. Good news for us is you can get a really good price on a Pelican iM2500. However is…
Self-Watering System This is a self-watering insert system for seed starting. It is intended for re-using containers as seed starting pots; adding the self-watering reservoir, drip trays, and a greenhouse top/lid. The STLs I've provided…
If you have a mix of seeds and seedlings in your starting tray, you're bound to start using nutrients… and nutrients means algae. These covers will protect your empty slots and cores from excess light. NOTE : The cover without the slot…
