Counting matching models…
I wore out the original feet on my astro chair so I designed these in Blender to be as close to them as possible. The original feet had steel washers in the bottom to prevent the steel legs from cutting through the rubber. I just printed…
Printed in PLA+ without support and upright as the inner edges of the eyepiece holders have an angle of 45°. Printed with a 0.4mm nozzle and 0.2mm layer. Model is tested with MaxVision 68° oculars, Explorer Scientific 68° eyepieces, Vixen…
SETEC ASTRONOMY - TOO MANY SECRETS, License Plate Frame Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
DO NOT LOOK AT THE SUN WITH THIS! Also have a look at my improved Dobsonian Design: https://www.printables.com/model/317112-propdob-telescope-foldable-travel-dobsonian-45-mir Hi, this is a Newtonian telescope with a 114 mm diameter mirror…
Simplest box for standard Bresser Messier solar filter.
3, 5, and 10mm extenders in M54x0.75 threads. Useful for telescope and astro camera connections.
I designed this for my handmade cuttingboard, which holds different sizes of gastronomy containers.
I designed this for my handmade cuttingboard, which holds different sizes of gastronomy containers.
Let's say you do astronomic photography and you are sometimes out with your mobil equipment: Then you might need this little toolset, that makes your daily outdoor setup, let's say on the terrace of your rented house, easy as 1-2-3. You…
////////// UNFINISHED & NO REAL CALCULATIONS ///////// This was and old project that i abandoned, (no more $$ ) might return later. This is a cheap way to bring radio astronomy to the masses! or just a way to listen to the air waves (The…
Mounting bracket for Red Dot Finder. For Vixen or APM dovetail style clamp and scope with 12mm dovetail. Сompatible with a Hadley dovetail finderscope mount.
Rollers for Roll-On Roll-Off Observatory Shed for Astronomy. These run on pipe of diameter 14 to 18 mm, preferably stainless steel pipe.
Electronically Assisted Astronomy (EAA) is a corner of the amateur astronomy hobby that uses cameras and electronic viewing devices to enhance the viewing experience of dim fuzzy astronomical objects. The Celestron Origin smart telescope…
Covers and caps for some commonly used sizes in astronomy and astrophotography. I find that sometimes I am missing a cap and I was unaware of a good collection, so I decided to design my own and bundle them. There may be some slight…
This is a Vixen-compatible mounting plate designed for astrophotography setups. It allows you to securely mount both a Raspberry Pi 4B (in a case) and the SVBONY SV241 Astronomy DC+USB Hub Box on a telescope using a standard Vixen…
I wore out the original feet on my astro chair so I designed these in Blender to be as close to them as possible. The original feet had steel washers in the bottom to prevent the steel legs from cutting through the rubber. I just printed…
A unique 3D printable creation — this Astronomy & Telescope Accessories Bundle of 5 complete 3D printable model packages. Save $7.98 (40% OFF) compared to buying individually! **Models Included:** - Bahtinov Mask - Barlow Lens Holder -…
3 Channel Dew Heater Controller for Astronomy and Power Hub on base my previous things PCB on EasyEDA Category: Electronics
Adapting Samyang135mm f/2.0 ED and 85mm f/1.5 IF UMC VDSLR lens for astronomy with EAF or OnStep focuser EAF holder is compatible for SCT and Newton telescope. For fine manual focus ring available too. Optional rings for old Carl Zeiss…
Dew heater controller for Astronomy and power hub Need this my PCB from EasyEDA: Main board USB port for LM2596 . Category: Other
Power case for astronomy 12V/60Ah only 6.5kg BOM 12x Turnigy 5000mAh 3S 20C Lipo Pack w/XT-60 battery 1x LUX Case Universal AKG130 2x Parallel Charging Balance Board For Lipo IMAX B8 Battery 1x 10 Pairs Original AMASS XT60 Plug Connector…
Astronomy right angle adapter for bigger binoculars (15x70 20x80) or similar types Componets: 2x Seagull Right Angle Finder or similar types 6x M3 screw Note: First, print the test ring to select the version according to the size of your…
Low profile mounting bracket for astronomy red dot finder Category: DIY
Mounting Bracket for Metal Telescope Green&Red Dot Reflex Sight 4 Reticles 5 Level Brightness For Vixen or APM dovetail style clamp FreeCAD source is this Category: DIY
Astronomy red dot finder holder for big binoculars 20x80 (25x100) or similrar types Other componets: 7x M3 srcew 5x M3 nuts 1x Red Dot Finder Note: Use a tap to create a M3 thread in the dovetail For Binioular 15x70 see:…
Astronomy Red dot finder holder for bigger binoculars Celestron SkyMaster 15x70 or similrar types. Other componets: 2x M3 srcew 1x 3/8 Inch Female to 1/4 Inch Male Tripod Thread Reducer Adapter 1x Female 1/4 to Male 3/8 Convert Screw…
Power distribution box 12V and 5V for astronomy telescope accessories. BOM 2x DC 12V Car Cigarette Lighter Socket Outlet Power 2x 5V 4.2A Dual 2USB Charger Socket Adapter Power 4x GX16 2pin 16mm Aviation Connector 1x DC Power Supply Jack…
Astronomy Mounting Bracket for Laser Pointer (Viven stile Dovetai) Version 1 You need print these parts: 1x laser_finder BOM 1x Laser pointer 6x M3 screw NOTE Use a tap to create a M3 thread Version 2 You need print these parts: 1x laser2…
Mounting Bracket for Astronomy Low-Cost Red Dot Finder 1x Red Dot Telescope Finder Scope for Astronomical Telescopes 2x M5 screw 2x M5 nuts Category: DIY
Astronomy red dot finder holder for refractor 80/400mm Category: DIY
Printed in PLA+ without support and upright as the inner edges of the eyepiece holders have an angle of 45°. Printed with a 0.4mm nozzle and 0.2mm layer. Model is tested with MaxVision 68° oculars, Explorer Scientific 68° eyepieces, Vixen…
The QHY163M COLDMOS Astronomy Camera is a $1100 USB3 camera with a 16MP cooled monochrome micro Four Thirds (MFT) CMOS sensor. It comes with an M42 thread about 18mm from the sensor plane, which is short for M42, but unfortunately too far…
A customizable OpenSCAD (free and open source: https://openscad.org/ ) focus mask generator. Can generate masks for various telescope types and photo camera lenses as a filter via the OpenSCAD customizer…
Adapting Canon Lens EF 400mm 1:5.6 L (Ultrasonic) for Astronomy with ZWO EAD EAF holder is compatible for SCT , Newton or Refractro telescope. Fine manual focus available too. OpenSCAD source code on GitHub BOM 1x Canon Lens EF 400mm…
This was designed to hold a ToupTek GPCMOS 1.25" camera on a standard 1/4-20 threaded tripod for testing purposes. After printing, drop a standard 1/4-20 nut into the hole; superglue it if you feel so inclined. There is a new version of…
After messing with my Astronomy Camera Holder for a while I realized it wouldn't be terribly hard to virtually glue on a dovetail mount for a finder scope or a telrad sight. This would make it much easier to know where I'm pointing the…
I was a bit annoyed with trying to fit my filters into my eyepieces case. Every filter seemed to come in a different box which meant they could either float around loose or I’d need to make multiple different sized holes in the foam. I…
After getting annoyed with 1.25" Filters coming in a range of boxes, I thought it would also be sensible to make a similar pattern for the 2" filters. This was a bad idea as the bigger design didn't lend itself to the pattern. I got…
Print at low layer heights for best results and less sanding requirements. For blank version use Prusaslicer to deboss a custom message or shape into it! Use supports on build plate only - I found that snug supports work quite well. The…
This is a set of 1mm, 2mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, and 10mm M42x0.75 adapters. The 4-10mm adapters are Male to Female style adapters, while the very tiny 1 and 2mm adapters are Female to Female adapters (they just sit between any…
I made this panel for use with a round electroluminescent panel I got for making calibration frames for my small refractor telescopes. This is based on the Astrophotography 5in EL Panel Circle Flat Frame Kit I bought from Ellumiglow:…
This model allows you to customize and print an astronomy filter drawer. While there are several really excellent designs out there already, none exactly matched what I was looking for. Specifically I wanted a 21mm filter drawer with M42…
This astronomical adapter allows the use of 1" 1/4 (31.75 mm) internal diameter astronomical mount counterweights on 1" (25.4 mm) diameter rods. The adapter is drilled to allow passage for the counterweight locking screw on the rod. The…
Astronomy Telescope SCIENCE TECH replacement optical adjustment - Telescopio Astronomico ricambio regolazione ottica 28mm inner diameter/diametro interno Resize to adjust dimensions All our designs are free to download and use. Your…
1.25" M28.5x0.6 astronomy filter adapter to mount CPL or other color filters to oculars of binoculars. Sizing is set for easy snap inside of custom printable ocular shells Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro…
