Counting matching models…
This mod will void your SSD's warranty but makes using them for recording much more convenient. Assembly requires two original screws and three additional M3x8 ones for the lid.
This is a tool less replacement adapter of the SSD caddy of the Atomos Ninja V. No screws or tools are needed in order to use your SSD with your Atomos. Also included is the clip (you have to print two of them) for the Smallrig 2209 cage…
I designed a sunhood for the Atomos Ninja V and Shinobi V. It is printed in two parts and then glued together. The main aspact is the screw to hold it in place.
I couldn't seem to find more of these that I could use with the Atomos connect on my Ninja V. I can confirm this works with the Ninja Ultra with a Connect module, the Shogun Connect and the Ninja V on a multi cam module as well. I used…
A sun hood for the Atomos Ninja V and Shinobi V that can be screwed into place. Supports are required and it's important that the model's position is upright with the edge of the screw contact point facing down.
simple print suport on the lead for the opening
Generally, there are two types of media that can be used with the Ninja V and other Atomos recorders using a similar caddy design - expensive AtomX drives that fit nicely in the slot and inexpensive caddies which accept a SATA SSD, but…
Atomos Ninja V / Shinobi 5" Screen cover
When the cover is attached, the threads and connectors on the side are still accessible.
Frame to attach the Small Rig Sun Shade to the Atomos Ninja V
Case for Atomos Ninja/Ninja Ultra based on Rugged Box by Whity. Fits following: Atomos Ninja/Ninja Ultra monitor-recorder NP-F battery (up to 7800 mAh) monitor mount SSD (with Master Caddy) cables etc. You will need 6× M3x30 screw (or 4×…
Specific box from @ Whity to fit an Atomos Shinobi 5" with its smallrig cage or not. I added extra space to add foam. Seal works fine if printed with TPU M3x30 screws :…
A slightly modified version of a simple sunhood for Atomos Ninja V to make it a bit shorter and more practical on the go. Obviously the effectiveness is reduced from the original model but if you angle the Ninja properly it can be…
This is my answer to the OEM Atomos drive caddy. I hated having to install and remove screws just to use new SSDs, so I designed a surprisingly secure caddy with no need for tools. Printing Tips: No supports necessary - brim is…
A beautiful minimalist painting of a Mushroom cloud on the wall or with a stand on the table. Size 185 x 200 mm You can find the small print stand for the table on my profile ↓…
Two-sided ATOM Keychain :) How to make easy layer change for many colors check movie below. How to use Layer Change to make colored Keychains / Prints in PrusaSlicer Printer: Prusa MK3 Material: PLA or TPU Nozzle: 0.4 mm Layer: 0.2 mm
Model This is an SSD adapter for the Atomos Ninja Flame, it allows you to use standard 2.5" SSD's. They slide in perfectly and snugly making it much easier to use. Print Settings Print this with any sturdy filament, supports are not…
A couple of years ago, I purchased a Sony NEX-FS700 second-hand for some random filming projects. However, I did not actually receive the rosette handle for the camera. Leaving a bit of a void in the overall look of it. Initially, I…
For all my vertical reel shooter, It is a vertical sunhood. I know its kinda stupid, but I find it uncomfortable when I use standard sunhood for vertical shooting and I can't the entire screen. This model is a remix of DoNotLeaN…
Model This is a loupe for the Atomos Samurai Blade which uses components from a GGS 3X Loupe. The only real issues is that it does not fully cover screen and should be redesigned with 2X Optics. This description is a work in progress and…
Magnetic carrying case for an atomos zato connect. Held together with 4 8x4mm Magnets found here. Affiliate Link: https://amzn.to/3WvcYKc
Oozora Subaru's New Shubatomo Design scaled for the Nendoroid.
I was inspired by this case, which unlike the full size cases allows the vents on the back of the Ninja to breathe, but the Crucial MX500 that I have didn't have the same board layout. This also keeps the original chassis as a heatsink…
Model This is a screen cover for the Atomos Samurai Blade but also works with the HDMI Blade. Print Settings I would highly recommend printing this with a flexible or soft filament such as PETG, ABS, Nylon or a specifically a TPU. Tape…
This is a 3D-printed cosplay prop of the Hematomorphic Infusion Blade from The Hundred Line: Last Defense Academy. This is intended to be printed on a single-extruder single-color 3D printer and requires glue to assemble. The metal rings…
There's tiny little knubs on the Atomos SSD caddy to allow using a finger nail to pull them out. I took inspiration from an SSD handle I saw but redrew things from scratch. First got the idea from DLSR Video Shooter's VideoDock. Needs 2…
This is the lootable uncommon item from the video game, The Cycle: Frontier. Item Description: Extracted from a glowing Teratomorphic Crystal, just holding this in your bag gives you an uneasy feeling.
With the addition of the NPF plate, the caddy is a little tougher to get in, but once its in - it's very tight.
Cover for the SDI ports for the Atomos Shinobi SDI. Print with TPU
This mount is designed specifically to securely and practically attach a SanDisk SSD to the Atomos Ninja V monitor/recorder. It is the ideal solution for filmmakers looking for a budget-friendly, compact, and reliable alternative to…
Si può stampare con un solo estrusore, anceh se è un po'tedioso. Nel cambio tool ho impostato un cambio colore (M600). Prima di procedere con la stampa consiglio di rimuovere il primo M600 nel file, che è inutile e costringe ad un primo…
