283 models
Some covers to fit standard Clipsal 2000 light switches common in Australia. There is some blank covers as well as some to accommodate a Tuya 4 way switch and one for the simple Tradfri Switch. Useful for stopping your not so tech savvy…
Print approx. €3.50–€4.28 excl. taxPreliminary estimate for one variant
EN: Easy printed keychain. Print without supports. CZ: Snadno tisknutelný přívěsek na klíče. Tiskne se bez použití podpor.
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
EN: Recommended parameters for printing: - 3 perimeters - layer height 0,1mm - 10% fill (gyroid) - printing without supports CZ: Doporučené parametry pro tisk: - 3 perimetry - výška vrstvy 0,1mm - výplň 10% (gyroid) - tisk bez podpěr
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for PETGSource material: PET
I have a plethora of power tools in the farm shed, workshop and office. With these, collected over many years of renovating, comes a number of battery capacities at 18V, ranging from 2 - 6 Ah, as well as numerous charges. Why not use…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Los Capitanes - Canberra, ACT, Australia ska band 3d logo. Mash up of No Fun Intended and t-shirt spliff cat design. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. Note that the corner…
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for one variant
🇦🇺 Welcome to Australia! The Sydney Opera House is one of the world's most iconic buildings and a symbol of modern architecture. It is not only an icon of Australia, it is also our representative of Oceania in the Wanderlust Collection of…
This is a super fun print I made a bunch of these a test prints every time I get a new filament. If you have trouble with the feet coming during printing I recommend dropping the model .1mm into the build plate in your slicer it should…
3d miniature of Melbourne, Australia! Collection of all my miniatures: https://www.printables.com/@jarvizar/collections/1124416 I have many other exclusive miniatures available for free on MakerWorld ! Slicing & Printing Details This…
This is an optimized version of “Lucy” (Australopithecus). This skull has been optimized to print in around ½ the time without any loss of quality (the original scan of the skull has many voids which drastically slows down printing time.…
Post a make if you print! I would love to see it. Clip for Australian L or P Plates, to clip to the side of your numberplate. Non-reversable but rock-solid. Recommend printing in ABS/ASA or PETG due to outdoor use but PLA will probably…
an ancient humanoid skull that is anatomically correct Print instructions needs lots of supports
master key for trollies in Australia, and is sized for a $2 coin
Need an Australian $1 or $2 Shopping Trolley Coin? Well look no further! :D Simply print it out and add them to your keyring! Great to give to the family and friends. Dimensions: $1 - 50mm(L) x 25mm(W) $2 - 50mm(L) x 20mm(W) Printed at:…
🇦🇺 Welcome to Sydney! The Trains of the World Collection will feature some of the most iconic railways, from cities such as Paris, Tokyo, New York, London, Mexico City, Melbourne, Seoul, and more! This entry contains parts for assembling…
This model is the skull of a 3 years old australian shepherd. It is built from a scan realized for veterinary purpose (the dog is alive and well). No bone anomalies where observed on the scan. Model generated from scan with the open…
I liked andy_burke's idea for a coin holder, but when I printed a test print some coins fit and some didn't. So I thought it would be easier to just redesign my own one from scratch in Fusion 360. I decided to add a lid so that you could…
This is for Australian (and also Swiss!) Wheelie Bins. You'll need a hammer to tap these into place for a snug fit. Let me know if this works in your country and I'll update the description! Category: Replacement Parts
Simple dust cover for a combination of Anderson SB50 (50Amp) and 7 pin flat (Type 3) trailer plug (Australia/New Zealand). TWO models included - for 1x Anderson plugs and the cover for just the 7pin connector. For 12 pin plug version, see…
Australian Shepherd Wall Art
Remix from https://www.thingiverse.com/thing:29821 https://www.thingiverse.com/rekrapd Just a different layout Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.12 Infill: 20 Filament: Creality…
Mount Panorama Circuit, Bathurst, Australia, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
An escapable trolley token based on the Australian $1 coin size. Plug it into the trolley coin slot, then squeeze the two little arms and retrieve it straightaway! The other side is actually a $2 coin! 💾 I've also included my Fusion360…
This project was inspired by those cool IKEA shelf to monitor stand hacks I've seen floating around, though this one is designed for us Aussies. It was cheap to make, super easy to print and I think it'll look great on any modern desk…
KMART Australia Pie Maker Pastry Cutter If you have lost the pastry cutter supplied, this is the file you are looking
⬛ 🟡🟥 Welcome to Australia! 🇦🇺🦘 This model is a little different from what we usually do in MiniWorld3D. Instead of a landmark or famous building, this is part of a series of objects representing art & design of the world . Together, they…
Simple dust cover for a combination of Anderson SB50 (50Amp) and 12 pin flat (Type 3) trailer plug (Australia/New Zealand). THREE models included - for 1x and 2x anderson plugs and the cover for just the 12pin connector. For 7 pin plug…
.stl and .f3d files included. I printed the 5cm version and it seems to work well. Both have tolerance of 1mm on all coins except 0.5mm on 2$ and 5c pieces. The 10cm tall version has added feet. Fusion 360 files included if you wish for a…
Remixed to suit the Australian Rangers and i also changed the size of the money holder to suit our coins. I removed the top lip to make it easier to print so it is a friction fit in the console now
Australian Shepherd
Migrating from thingiverse https://www.thingiverse.com/thing:4362301 Original here https://www.thingiverse.com/thing:3797754 at that size, the original were quite weak and breaking easily, remix it to make the wall stronger. compared to…
3D model of Australia F1 track 2023 Scale to your desired scale and drop down the Y to get the desired height of the model.
Just a model I made of the Australian flag. There are two versions: massive and mini, which can both be printed with a colour change at the specified layers. Bottom layers: Blue Middle: White Top: Red
replica of WWII Australian Trench Knife
AU $2 Trolley Token. Use the new / improved “easy out” paddle version. Or if that doesn't work on your style of trolley the original, in either coin (if you are a rules stickler) and paddle forms, all with keychain holes. For maximum…
Used spec documents, but no guarantee of accuracy. DO NOT USE IN LIVE ELECTRICAL OUTLETS - YOU DO SO AT YOUR OWN RISK. Reference model only. For use as a design aid for parts that have AU sockets and plugs.
I love uploading car parts. Great fun altogether. Maybe some day it will be possible to download a complete Toyota Hilux 1:1 scale Hilux and print it from metal. Make sure you print the bottom part on it's side, I have included some 0.4mm…
This is a replica of an Australian picnic table which can be found in many natural parks all over the country. These picnic tables are of high quality and are very comfortable to sit at. They are constructed out of wood or of recycled…
Plasterboard cutout jig for Australian power points with notches to align with laser levels. Two small holes are 45mm apart to allow for quick drawing of 90mm holes. Print at .15mm, its thin enough that infill percentage has no real…
A 6 swich and 3 switch gang plate for standard australian light switches. Print in glow in the dark for easier vision at night!
This is a snap on cover for a common light switch model in Australia (clipsal 2000 series). For use with smart bulbs with remote that require the light switch to always be left on. The .OBJ file is included so if any modification need to…
Albert Lake Park Circuit, Melbourne, Australia, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…
Simple dust cover for Australian / New Zealand flat 7 pin trailer plug. Limits dust & moisture getting on the pins, however I also added some dielectric grease in the holes to prevent corrosion also. Remixed from…
This is an Australian Bull Bar for a Western Star 1/14 scale Tamiya RC Truck. This also includes the Western Star Grill modification which fits straight into the existing kit supplied grill. Instructions Print and assemble using 3/16…
It's rare to find 3D files (or anything else, to be honest lol) of Australian Shepherds, so... let's fix that!
For commercial licence: Patreon https://www.patreon.com/c/MiniFlexi Say hello to the Mini Flexi Australian Shepherd – a cute, articulated Australian Shepherd designed for effortless 3D printing! This model is 100% print-in-place , meaning…
Australian scout fleur de lis woggle - Canuto o pasa pañuelo con flor de lis de Scouts australianos. For scout neckerch
For Aldi trollies Category: Household
This is a remix of Hextra's Nucleum insert in order to add space for Australia and future expansions that add contract tiles, action tiles, and other minor elements. I've also included remixed versions of Dukesavard's power plants…
Realistic penny coin as a coaster This is a replica of an Australian Penny coin for use as a coaster. The diameter is 10.1 cm (3.9 inches). The back side is flat with 3 round insets with 10 mm (0.4 inches) diameter each. You can glue some…
It seems that the Doggie Cookie Cutters that I have uploaded are some of my more popular designs. That said, I received a request for a Australian Shepherd and this is what I came up with. I hope you like it. As always I am including my…
Australia Melbourne The first place is Carlos Sainz number 55 You can build a racing circuit in Albert Park using roads from the Racing Circuits - building kit . Here is a list of the parts and how many you will need: A1LRC - 1× A2CLRC -…
Made a one dollar coin trolley token. I printed 10 as I keep forgetting to carry change! Printed initial on a Prusa Mini in PLA+ .15 settings 15%infill Tested on Aldi trolleys
Token to unlock Australian trolleys. Once the trolley is unlocked, pinch the sides of the model to escape it from the lock. Keyring side is the same size as a 2 AUD coin. Included .step file for modifications. Cheers to @visualdensity for…
Based on @FilipKolinsky_352287 's parametric f360 gridfinity template. https://www.printables.com/model/286722-gridfinity-block-template-easy-to-use-for-fusion-3 It has magnet holes, but with the .f3d file you can remove them, or add…
Gutter clips for old W Australian profile, printed from ABS due to high heat range in WA in summer, but other materials can be used eg PETG or even PLA. Printed at 0.2 layer height with no infill just increased wall perimeters for…
This emu statue captures scale and posture while remaining strong and printable as a single piece. Powered by MakerWorld – Image-to-3D AI https://makerworld.com/makerlab/imageTo3d
The newest iteration of the Australian passport is notorious for curling up and warping of the cover due to temperature and humidity. So I've made a sleeve that helps retain the shape of the passport for long term storage. This is made…
Looks like cases must vary between countries, I had to modify the parent to make it fit my Australian game case. Print Settings Printer Brand: TEVO Printer: Tornado Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 15% How I…
This wombat statue focuses on weight and stability while keeping a clean, printable structure. Powered by MakerWorld – Image-to-3D AI https://makerworld.com/makerlab/imageTo3d
Remix of the excellent Fortnite Logo Lamp created by LowRob as I was unable to find the parts used in his model. Slightly increased the size and got parts from by local Jaycar (the Australian Radio Shack). Fusion 360 model attached so…
Made this L/P plate holder to stop all my L plates flying off as the zip ties would rip through the plates when riding. You can use zip ties to attach the plate holder to your motorbike and hopefully it will be much stronger than just…
I had a bunch of change on my desk, so I wanted somewhere to store it. Would suggest doing a slice of the middle section and printing a ~2mm high section to check your tolerances with coins, and scale +1% if required (it's designed to fit…
This is just a modification of the "head" part from: https://www.prusaprinters.org/prints/24291-soda-stream-air-gun. The thread on The Australian bottles is different to US and EU. I just modified the provided file to suit AU bottles.…
Just a standard 1165 x 1165 x 150mm Australian pallet. Import into your favorite slicer and then reduce the model size. 5% works perfectly if you are printing a pallet for your Bunnings/Hammerbarn forklift model. Printed pretty well on a…
This object was created with a python script I wrote called dem2stl: https://github.com/GeoffWilliams/dem2stl You can use it to convert any jpeg format digital elevation map into a 3D printer STL file. The data for this example object was…
I tried several other tow ball covers and none were a good fit… too loose. I modelled this one to be “snug”, with the bottom of the cover flexing over the base of the tow ball mount and being a friction hold. It is so snug as to not be…
Simple yet effective shopping trolley coin alternative as its hard to find a coin nowadays. Attach it to your keychain
A neutral Australian Shepherd figurine featuring realistic proportions and simplified fur geometry. Designed for reliable single-color FDM printing as a solid one-piece model. Powered by MakerWorld-Image-to-3D (…
I received another cookie cutter request. This time for a "head only" of an Australian Shepherd. As always, I am including my Basic Sugar Cookie Dough Recipe. Print Settings Printer Brand: Printrbot Printer: Printrbot Simple Metal Rafts:…
2x2 Gridfinity model to hold Australian coins and some notes in the middle. Made a bit shorter for an Ikea Alex drawer.
Remix of the “Removable token for shopping cart (Request your coin in comments)” by VikKon only for the Australian Dollar (AUD). I have added a few logos on removable shopping cart coins to personalise for family and a few close friends…
Thanks to HarryTHamster I have been able to produce a 5 slit version for cutting fold lines into pastry.
Tow ball cover i created to fit over a standard Australian 50mm tow ball. I printed in PETG to be a bit stronger and longer lasting than PLA.
Looking for a gift that's both unique and utterly charming? This 3D model of an Australian Shepherd is a delightful representation of everyone's favorite intelligent and energetic canine companion. With its detailed and lifelike design,…
This dingo statue captures the wild canine spirit of Australia with a strong, printable form. Powered by MakerWorld – Image-to-3D AI https://makerworld.com/makerlab/imageTo3d
3d miniature of Albert Park Circuit in Melbourne, Australia! Includes a colorized version highlighting the Grand Prix circuit! AMS and MMU compatible using the .3mf files. I'm primarily a Bambu user so let me know if the MMU file doesn't…
This echidna statue uses thick sculpted spines instead of fine detail, making it ideal for FDM printers. Powered by MakerWorld – Image-to-3D AI https://makerworld.com/makerlab/imageTo3d
I designed a clock to look like a Cuckoo clock but with Australian animals. The various parts join together using 3D printed dowels and keys, no bolts or screws needed. It uses a clock mechanism I had in my junk box. The mechanism is 58mm…
Hollow Maps of Australia and USA Made with tracing the inside onto paper in mind. Size: (over 100mm wide) X 1mm thick. Can be resized in you slicer. Layers: 0.2mm or less.
I messed up the size of the project so firstly adjust the size of model in your slicer.
General approximation, but dimensions taken from specification documents. DO NOT USE IN LIVE ELECTRICAL OUTLETS - YOU DO SO AT YOUR OWN RISK. Reference model only. For use as a design aid for parts that have AU sockets and plugs.
Created out of a hate of trying to fish power cords from behind the washing machine and dryer. I've made the socket hole not a snug fit so I could put blu-tack in behind it to hold it in place. Enjoy! Category: Household Supplies
A coinholder to suit Australian coins for the cupholder of a VW Golf Mk6. It sits snugly and is removeable. It holds all denominations from 10c to $2, and is 42mm deep, so it will hold around 25 10c coins, through to 13 $2 coins.
Australian Animal Stencil Scale X and Y to your desire, keep Z @ 1mm My photo was 500% scaled
Print 100% infill PLA works best
Fluffy pupper 3D scan on stump
It's silly that we decorate our homes with snowflakes in 40" weather, Let's make some truly Aussie Ornaments! Starting with beautiful gumnut flowers! These were modeled on the “Silver Princess” Caesia flower:…
Removable trolley coin token to suit shopping trolleys in Australia, this is $2 dollar size. Attractive design to add to your keyring. Simple to use, insert the token into the trolley $2 slot until the chain releases, swivel the token to…
Tested on aldi carts, works perfectly and was deigned to fit a Niteize S-biner.
In Australia we dont do snow mans we dont get snow we do bush animals so here is a Kola wearing his Santa hat.
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
This print is a business/credit card sized version of the Australian Aboriginal Flag. This was modelled entirely within Prusa Slicer, and when you open the .3mf you can find my handiwork and iterations off the build plate. I've used…
Australian Flag Coaster Designed in FreeCAD. The .stl is large so scale it down to 30% and set z height to 4mm in the slicer. Ender 3 v2, Generic Silk PLA, 0.4mm nozzle, 0.2mm Layer height.
This quokka statue emphasizes charm while staying printable and realistic in appearance. Powered by MakerWorld – Image-to-3D AI https://makerworld.com/makerlab/imageTo3d
I got tired of food scraps making it past the side of my sink strainer and decided to make one that fits better on my drainage outlet. The strainers I found here were all too deep (~3 cm) for my outlet. This strainer features a mounting…
This kangaroo figurine features a strong stance and long tail, capturing the essence of this unique marsupial. Optionally includes a baby joey in the pouch. Printing : Compatible with both FDM and resin printers Supports : Recommended…
Australian coin holder, I used this in the cupholder in my car. Tapered the body to fit better in the car, and also fixed a model error in one of the plugs. Springs are required for operation - ID 9mm, length 35mm. Remixed from…
