Counting matching models…
This is my 3D-printable hexacopter (drone) frame, designed to sit in roughly the same size niche as the old DJI Flame Wheel F550 kits, but with the ability to easily print and replace anything you break if (when!) a crash happens. If you…
I needed a larger bezel for my car as it has two single DIN frames (rather than a double DIN). I made this with a larger bottom edge to hide the gap, it fits snugly around the AX1000, AX3000/AX3200 and AX5000 screen. I curved it to match…
Elevate your router for better signal and stability. Single screw fitting. Should be comparable with most screw sizes, use washer to ensure a secure fit. Designed for Asus RT-AX53U router however should fit any router with 84mm - 85mm…
Designed for Asus RT-AX58U v2 router however should fit any router with 97mm - 98mm mount point width.
Max 5 ESC plate and Radio relocation box. Base Plate Technical Drawing PDF https://www.dropbox.com/s/n8oeqlaa6dvb8fq/X-Maxx%20Max5%20Base%20Plate%20Technical%20Drawing.pdf?dl=0 This is for relocating the radio receiver in the Traxxas…
I wanted to mount my Dell soundbar on top of my monitor, so I designed this mount. Soundbar model is AX510. My monitor is Dell E2214H. Should fit most of the Dell monitors. Print instructions Print with supports from build plate only.
This is a Gridfinity system for an IKEA PAX wardrobe. It fits into the KOMPLEMENT drawer 50x58 cm. ! Some of the print files are up to 225mm in size. They require a correspondingly large print bed. On the other hand, you have to divide…
Instructions: Print 2 of the T-pieces, super glue at the spacing needed to fit in the mounting holes
Simple Wallmount for TP Link Archer AX58 Router
I love the original design done by @Ornotermes and thanks to offering the original CAD drawing I was able to use my sub-par Fusion 360 skills to make some small modifications to fit my use-case. I used a Sony XAV-AX5500 and to allow for…
Wall mount for the Zyxel WAX510D Wireless Access Point, with catch. Printed in Bambu Lab PA12 GF
Printed in PETG, modified and tested so it can be printed without any supports, with the wall/furniture facing side on the bed. It may be too wide for some printers (225mm) but can be shortened to 220.
Print it the same way , as your Multiboard, 3x walls, 15% infill, use Organic supports
This is a vertical stand for a Vertical Router Stand for NETGEAR – Nighthawk AX5400 I bought at Costco. Intent was to take less of a footprint on the counter where I needed it. Center to Center mounting holes are spaced at 105 mm if you…
TP-Link Archer AX50 V2 Cooling MOD top cover. Time: 12h37m 128g Need 2x 120mm PC case fans :)
Dell AX510 Stereo Soundbar Speaker Holder and Power Connector for Incompatible Monitor is a custom solution designed to adapt the Dell AX510 soundbar to monitors that are not natively compatible with its standard mounting or power…
UPDATE V2: I adjusted the length of the foot for better stability and added some material above the plug mount for better strength. The side contours have been adjusted for aesthetics. The RP-AX58 is an excellent value for those who need…
Printed with 4 walls, but can probably work just as well with less. Uses three hooks from this set called Skadis_Shelf_hook.stl Needs two M4x10 bolts for assembly, which are threaded as is into the corresponding holes. Make sure your…
You can put it on your camera monitor for better visibility.
this is a motor protector for the GepRC ax5 frame. it can easiliy fitted with just one small zip tie and will not require hot glue or similar Leave a like and share your makes if you find this useful ;-) Print instructions Category: R/C…
You can support your micro HDMI - HDMI adapter to save your output port.
197mm between mounting point centres. Mounting wider diameter is of 8mm, narrower is of 4mm.
TP-Link Archer AX50 router stand/Legs Rafts: No Supports: No Resolution: 0.2 Infill: 10-20 Filament brand: anyting Filament material: PLA-PETG
Just needed a way to mount it to the wall, so I had AI make this simple print. A bit bulky, but it's functional. Technically, the screws it was designed for are " #8 wood/drywall screws (or M4/4 mm screws), pan or round head, with a head…
geprc ax5 front, to replace te normal one. The normale one is a own design wich adds some material in some point vs the original. Front is not in shot if used wit a normal runcam swift The other version is a dual file design to add a…
Optimize your network setup with this custom wall mount designed specifically for the TP-Link AX50 router and Philips Hue Bridge . Engineered for performance and convenience, this mount also includes support for two 80×25mm cooling fans…
Hides your mini USB/Battery/whatever under the router without compromising on air flow. I printed with PLA, but should work with the other plastics. I recommend using brim when printing.
Stand for Asus RP-AX58, European variant
Part to mount the antenna of the ASUS PCE-AX58BT card. I would recomment printing in the orientation of the Cura screenshot. I did not start the part with the right orientation unfortunately. :) Currently designed to fit a width of…
Impresora: Core One + Boquilla: 0,25 Altura de capa: 0,15 Relleno: Giroide 10% Paredes: 3 Material: ELEGOO Rapid PLA+
While building the control panels we were using tape on the top of the drives to keep them clear of falling debris. It was always a pain to put the tape on/off so we came up with these printed panels. These are only to be used during…
Hides your mini USB/Battery/whatever under the router without compromising on air flow.
A IKEA SKADIS mount for the RT-AX59U that uses the factory base/backplate as a part, so you don't lose that bit of plastic to some junk drawer. It's not a robust mount, so make sure you print it from strong materials. If you push on the…
Simple Archer AX55 Mount for pegboard with a space behind it to run cords for a cleaner look.
Printed with 4 walls, but can probably work just as well with less. Uses three hooks from this set called Skadis_Shelf_hook.stl Needs two M4x10 bolts for assembly, which are threaded as is into the corresponding holes. Make sure your…
Impresora: Core One + Boquilla: 0,25 Altura de capa: 0,15 Relleno: Giroide 10% Paredes: 3 Material: ELEGOO Rapid PLA+
This is my very first self-designed 3D model – a practical and sleek wall-mounted WiFi router holder for AX58 TP Link router! I created it to help organize space, elevate your router for better signal coverage, and ensure proper airflow…
I needed the base model for making a stand for the router, so I modeled this first. Use as you want.
Cover to keep things from falling into drive during assembly. To be removed before power up.
![[EU] Asus RP-AX58 / RP-BE58 Range Extender Repeater AiMesh Node Stand](https://media.printables.com/media/prints/55842c70-0764-4a28-b5e8-9874ef19c218/images/12309456_0075a104-342b-4b26-9dd1-0c7918b14824_aba12282-ac32-47e4-8288-7d154fcfa736/signal-2026-03-14-194924_003.jpeg)
