Counting matching models…
Dividers for the IKEA Boaxel wire baskets. The design has holes, so the dividers can be fixed in place with cable ties. Additionally the design comes with a sliding mechanism so that the individual halves can easily be printed on a Prusa…
My first fan broke when the fan was dropped due to layers being parallel to the fan blades. This gear allows for the layers to be perpendicular along the shaft making it a lot stronger. The pin has enough space to push in with relative…
A octopus with the head of an axolotl (MAKE THE SCALE BIG ENOUGH SO THE TENTECOLS WILL MOVE!!)
I use a 5mm steel axel for most of my model car designs but I got a request for a printable axel so here it is =) check out my other designs: https://www.thingiverse.com/soarpix/designs If you have any questions, let me know in the…
Dimensions of the Pin are adapted so that it can fit easily. Also the walls are thicker than on the original Lego because I printed in PLA so it gives a bit more stability. Layer height: 0,15 mm Brim: also used a brim for stability,…
Ballon race car TPU tires 5mm axel Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 8 Filament: MatterHackers.com PLA TPU red Notes: Ballon race car TPU tires 5mm axel Category:…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Axelstand for your rc crawler more specific Axial SCX10 III portal axels AR45P (AX1232022, AX232023). Can be used on front and back. Hardware 2x M3 x 8mm Cup screw 2x M3 nut For more info in swedish Buttyboys.se…
Version for left, right and both sides.
I needed more clips to hold IKEA JONAXEL units to each other so I designed what I needed. Enjoy!
I was building the car for one of my daughters and lost a few of these bushings, so I CADed it up real quick, and printed it in PETG. It fits perfectly, and prints in around ~10min on my Ender3 S1. Good luck Dads!
Reingegnerization of tatra original joint cap for semiaxles, with a thikness of 1.25mm, much resistent and durable. To print by Tpu 60A or 70A, to ensure softness and strength. i recommend to assembly by 2x M2 screws with 2x washers and…
Print with a brim like it's an extrusion (standing up). Scale on the longest axis only to make the faceplate longer or shorter depending on how much text you want on there. If you have a ½ in label maker, it'll fit comfortably in the…
Print with many perimeters for strength
My wife wanted dividers for the IKEA Jonaxel mesh drawers to sort and store her ever expanding collection of Lego bricks. It took 8 days and 8½ spools of filament to fill the entire stack of 6 drawers = 24 boxes, about 350g per box. Print…
I've lost one slider for the boaxel basket It feels that PETG works better, but PLA wasn't far off, print in 100% fill and full supports
I tried multiple variations and adjusted the dimensions to perfectly match the JONAXEL. This one is super tight and strong.
Divider wall designed to fit inside the IKEA JONAXEL slim mesh basket ( 904.199.65 , 25x51x15 cm). Small pins on the sides slot into the mesh openings, keeping the divider in place. Hexagonal pattern design.
Protective sleeve case for minidiscs, similar to manufactured slim cases. Easy to print upright without supports. Modeled after old Maxell and Sony MD sleeves inner spring latches to retain the disc (works well only when you insert the…
Divider wall designed to fit inside the IKEA JONAXEL slim mesh basket ( 904.199.65 , 25x51x15 cm). Small pins on the sides slot into the mesh openings, keeping the divider in place. Voronoi pattern design.
IKEA Jonaxel wire basket wall mount. The position of the hole for screwing it into the wall has the exact same offset as the original part. The thickness of the back is also the same as the original piece. Yes, you can order free…
These are longer dowels to hold the tape rolls on the Infinite Tape Organizer. I could not get the originals to work. These go through the entire length of the roll. I recommend printing horizontally for strength. There is a flat side…
Wheels with Tires for toy cars 5mm axel balloon racer Print Settings Printer Brand: Kingroon Printer: Kingroon KP3S Rafts: No Supports: No Resolution: 0.2 Infill: none / 30% Filament: MatterHackers.com PLA TPU any Notes: Wheels with Tires…
Useful snap-on hook for IKEA JONAXEL shelf. The hook designed for attachable in both sides (front or side-bar)
These hooks were made for the IKEA JONAXEL product family of shelves. There are two main categories: HEAVY-DUTY (only attachable to the frame ) and LIGHT-DUTY (attachable to either frame or the shelves ). Examples: The hooks come with…
It's S shaped, symmetric. Print on it's side, out of Prusa PETG, ~30% infill, works fine with very little stretching. The snap fit is really tight. See the drawing for dimensions. Source FreeCAD file included.
I wanted to mount a Boaxel basket to this empty space in that modified cabinet. The basket is the perfect size but the structure around it was a bit too large. I therefore designed low profile slides that allow to hold the basket in…
designed to center mount filament spools. The axel ends fit into 8mm center hole on 608 bearings. works great for center mount dryboxes like this: https://www.printables.com/model/1102515-filament-drybox-reremix-designed-for-plastic-house…
I don't have a picture but it works.
Just a simple model to create a single axel for the Eibos Cyclopes. When printing from one spool, this will allow the other spool to spin too. One issue is if the spool you are printing from is quite a bit lighter than the other spool, it…
This joiner helps you position your IKEA JONAXEL racks at equal distances (10, 20, or 30 mm), and make them stiff together. I used two on the front (top and bottom) and one on the back in the middle.…
I made the model and its a spare part for the axle holder from the Playmobil City Action Set with the number 9466 Fire Truck. So if your kids also lost the part, here you go and don't forget to post a make. :-) Print instructions I will…
For me, tolerances were pretty good- needed a bit of force to fully seat. Dimensions: Wall→Tip: ~100mm “Trough” (flat part on top): ~55mm
Why this exists I’m using the IKEA BOAXEL system a lot in my office/workshop, and I ran into a very practical problem: adding more full-depth shelves to increase capacity quickly becomes impractical . BOAXEL “40 cm” shelves (actually ~ 38…
My son broke the axle of this tractor trailer. I designed and printed a replacement part in order to restore the trailer. One iteration further, it is fitting perfectly and my kids are happy :)…
Thule FreeRide 15mm axel mount Mounting mountain bike forks with 15mm through axel forks on the Thule freeride bike rack. Holes in mount are made from M6 bolts.
The rope for my sunblinds is pretty long and it gets pretty messy on the floor under the window when the blinds are rolled up, so I designed this hook to store the excess rope. I didn't really test how much it can handle you can use it to…
A wheel and axel for the duplo trailer 14923c01. The parts are presure fit. Axel 4mm Wheel ⌀ 28mm with 4mm axel Printed in PLA with 15% infill 0.20mm layer height, printed laying down with support.
connects with the same twist-lock connector as the K1 spool holder. It can sag over time, so I added a hole in the back for a 20mm M3 screw to give it a bit more stiffness.
This bumper was designed specifically for the 80x38x160cm Ikea JONAXEL shelving unit in order to prohibit our resident Vacuum Robot climbing through the feet ( which it can, but not very graciously ). It'll likely work with all other…
The internal axle of the filament spool holder of my our CR-10 Smart is broken, we noticed the design of the internal axle are very thin, and we also see other user is having the same issue. It can be strengthen with longer screws, and…
Zeelo 160-2gt-6 Endless GT2 Belt 160mm Length 80 Teeth 2GT Synchronous Belt 2mm Pitch 6mm Width GT2 Closed belt https://a.co/d/eN7VdON LEGO 10pc Technic axle Set (3M 6M 8M 10M 12M Mindstorms nxt Robot Gear) https://a.co/d/99LIaYM Onshape…
My kids Dirt Hog aka Fazer 1st servo motor axel "servo horn" brokes like every second time. I decided to remodel this part so i can print this every time i'll need one and not to spend like 13€ every single time. This works, it's not…
I looked at some throw levers in store but I quickly thought “Hey, that's some expensive metal, I aint gonna pay 100€ for that”, so I decided to make my own one. Took me a couple of days and several iterations, but I think this works…
Xmod RC Rear Axel Bearing Holder Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: .2 Infill: 100 Filament: generic PLA Category: R/C Vehicles
Large Mawsoniid from the mid-Cretaceous.
Simple fork mount for a 12x100 thru axel to mount on the center headrest of a ~2010 Subaru Forester or similar. (10mm headrest posts 95mm spacing) **Update: loosened tolerance a little on the headrest portion. Apparently 40+ people…
Print the thing idk what else to say. Download and get lost. I used 0.4 at 0.2mm use whatever you feel like I don't really care. Also if you need the screws #4/40 - 1/4 Countersunk. Check the Amazon and give papa Bezos your soul.…
He's name is Axle and he is very drunk on fermented banana juice, he is very angry at how the Jungle King is managing the jungle and he has nothing nice to say about it.
infill 100% to make it strong, if you can print in ABS or other hard materials
Two part holder for the Logitech K400+ keyboard. *estimated total print time and material usage (P1S, 0,22mm layers, PLA, 3perimeters): 1h16m, +-60g
I needed a holder for my headphones compatible with BOAXEL system so here it is. Hope this helps someone! Pinted in PETG in horizontal orientation for added strength with a 0.4mm nozzle and 0.2mm layer height. Using tree supports on P1S.…
BOAXEL pants hanger fits almost perfectly IVAR racks. So I've made an adapter
Axel adapted to use 2kg spool holder base with silent auto-rewinding spool brackets. Gravity Spoolholder 2kg Version
A simple filament spool holder for (by default) 1kg spools (with 50mm inner diameter). By editing the spool width and holder diameter parameters it can be customized to match your spool dimensions. Material: PLA ; PCTG ; PETG Layer…
Many existing models are too closed or have other problems. So I simply created my own parametric model in a few minutes in Onshape with a 50° transition angle between the mirror halves. For printing used Sunlu PETG, standard 0.4mm…
PLA will work for a limited time. PETG is a better choice. The part can be made stronger by printing length wise instead of upright like in the picture. But if you do that then supports will be needed. Editable here:…
Now you can use that dusty Anet A8 spool holder for any printer without being annoyed at its design. The Anet A8 kit included an A-frame spool holder. The problem is that the threaded rod that they included causes the spool to wander to…
Front bearing holder for Xmod Rc cars Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: .2 Infill: 100 Filament: generic PLA Category: R/C Vehicles
To get a tight fit to the axel threaded bar i printed it with spiral mode 0.16 layer. This is the first thing i have designed as i am new to the 3D printing world! If you do print it please share pictures and comments thanks. Print and…
Wall hooks to mount axel stands on; needs a piece of 20 x 45 x 1000mm piece of wood.
Print with supports, no brim needed. It will probably be printable without supports if rotated upside down (adding brim for adherence), but only requires a short tree support in this direction.
Conversion kit to turn an IKEA Jonaxel Shelving Unit (50x51x70 cm) into a 19" rack. This model fits 1U of equipment. Designed to use M5 nuts and bolts to attach to the Jonaxel, and M6 bolts for the rack mount equipment. You will need to…
Boaxel wall distance blocks 3-20mm
You probably know the situation: you want to store something on an IKEA Boaxel shelf, but because of the wire design, the item won’t stand upright. This tray is designed to hold four standard soap dispensers.
NOTE: If you like our designs, please consider supporting our work by joining our Patreon channel—your support helps us keep creating and growing our community! This is a set of pieces that can be used to recreate the Rock Raider Axel fig…
My small children broke the wheel holder of a Revell Revellino RC car that connects the axel with the wheel. I created a replacement holder that works. Best for printing: I had issues with the layer adhesion because of the hole in the…
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn skills and test out theories…
.2 layer height, .4 nozzle. Suggest 3 wall loops with inner outer inner wall printing order for precision. Also suggest using random seam so that the roller doesn't have a lump in one spot at the seam.
I wanted to mount 2 additional shelfs in the closet of my girlfriend. So i created this litte bracket in FreeCAD. They use only 2,2g filament. Mount to the Jonaxel drawer with M4x40 screws.
Kids broke the factory part in about 5 minutes after unboxing by playing "Crash Battle." Left Rear Axel replacement Monster Jam "grave digger" 1:64 Scale Remote Control RC Monster Truck. This RC car was bought at target. It was for the…
The budget line of the “Wolf-Garten” mowers attach their plastic wheels with a starlock washer on a 10mm axel, without and grove or additional fixations. So, possibly after the warranty time they will come loose and fall off. Instead of…
Quick edit to use with 12mm thick by 40mm long board to fit the ikea boaxel.
Sharp drawer microwaves are known to have an acquired issue where either abrasions on the metal wheel axels or paint damage on the drawer frame from the wheels or wheel axels creates severe current arcing in the microwave. Sharp denies…
SeaSucker Adapter for Surly Ice Cream Truck through axle.
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn skills and test out theories…
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn skills and test out theories…
IKEA Boaxel has holes in their brackets. IKEA sells a clothes rail, that can be mounted to those holes. But otherwise, there is no other use for those. So I decided to create a mount, that combines another IKEA system - SKADIS - with…
this is a replacement hubcap for a Brenderup 200 trailer, it was modeled after the original cap. printed and fitted on my own trailer with a 52mm hole.
Tool to install axel seal into RX-8 Differential. Designed to be used with air hammer seal driver tool, but can be used with any metal driver.
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn skills and test out theories…
Axel - Palworld Figurine is a video game character figurine STL for 3d printing, ideal for fans searching for Palworld Axel 3d model, Palworld character statue, or game collectible prints. You can use this 3d printable character model for…
This scale axel will compete your scale shop / garage.
The little plastic covers for the wheel axels on my grill fell out when rolling it around the deck. Pretty lame for a new grill to have an issue with an injection molded part. Oh well perfect simple use for the printer. These fit in with…
I use these to attach thru axle wheels to my PBK bike travel case, which was designed for quick release wheels. These may work in similar style cases, such as the Bonza Bike Box or the Bike Box Allen. Shapr3d file included as well if…
Part BBM3-67-H41 for the lock cylinder cover. Should fit Mazda 3 between 2010-2013. PLA works but given its in a car, a more heat resistant material is better. 90% infill.
Simple cup hanger for IKEA Boaxel. Perfect to hang cups between the shelves. Print Settings Printer Brand: Kingroon Printer: Kingroon KP3S Rafts: No Supports: Yes Resolution: 0.12 Infill: 35% Filament: Devil Design PLA White Category:…
Solder spool holder designed for rolls with a inner diameter 9mm or bigger. Print the axel with supports. Max width: 45mm Max Diameter: 45mm Min/recommended inner diameter: 9mm
I needed a way to store my spare build plate next to the printer and the existing designs were fairly complicated and material intensive. Lots of potential improvements on this idea but this one works for me. It should probably have some…
I tried multiple variations and adjusted the dimensions to perfectly match the JONAXEL. This one is super tight and strong.
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn skills and test out theories…
A wheel and axel for the duplo trailer 14923c01. The parts are presure fit. Axel 4mm Wheel ⌀ 28mm with 4mm axel Printed in PLA with 15% infill 0.20mm layer height, printed laying down with support.
You probably know the situation: you want to store something on an IKEA Boaxel shelf, but because of the wire design, the item won’t stand upright. This tray is designed to hold four standard soap dispensers.
Quick edit to use with 12mm thick by 40mm long board to fit the ikea boaxel.
This remix modifies the solder stand axle to fit Afrisol brand solder spool. Compatible spool dimensions: - Bore diameter: 21 mm - Spool width: 58 mm Changes made: - Increased axle diameter to match the larger bore - Adjusted axle length…
Many existing models are too closed or have other problems. So I simply created my own parametric model in a few minutes in Onshape with a 50° transition angle between the mirror halves. For printing used Sunlu PETG, standard 0.4mm…
Wanted some half shelves for the same reasons as the original designer, the dimensions you need for these are 6" x 0.5" x (shelf length)"
