253 models
Playdoh/clay letter stamps made in OpenSCAD. STLs for the letters A, B, and C are included as demos, but you can modify the "text" variable in the SCAD file to be whatever character you want. Print instructions No support material should…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
This are just test Gcodes (two) for more info (userguide) please look at: https://3dlabprint.com/shop/stearman-pt-17-kaydet/
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
I have used the LEOPARD LC3536-6T 1270KV motor, back mount. Unfortunately, there is no cooling of it. There is no air flow around the motor. So, I have created a new motor mount with air holes and printed it from ABS - it allows a better…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
A magnetic charging stand for the Playdate . It uses eight round 8mm x 1.5mm neodymium magnets for the corners (two for each) and four rectangular 5.75mm x 19mm x 1.75mm for the center. The magnets are connected to a standard 5v USB 2.0…
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant
I made this for my kid, to his playdough with text ‘Mom’ and ‘Dad’. I've left an empty plate, so you can make your own design. There is two holes for lining up when gluing. These holes are made for 1.75mm filament thread. It can't be…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Simple Playdate stand. The bump rests in the headphone jack for support, and allows the face of the Playdate to remain uncovered. Designed to be small so as to use little material and print fairly quickly. The attached gcode is with the…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
Play dough fun for our children. It can also be used for cookie printing. There are finger indentations on 2 sides for easy holding. There is a finger hole where it will be pushed to press. Thus, you can easily grasp and push. The more…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Rubber duck moneybin (SpareAnd) (SavingsDuck) This model is a remix of the original Rubberduck. The duck screws onto the pond base.
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
Here's an easy to print play-dough toy waffle maker press that makes heart shaped waffles. These play waffles are suitable for use in the toy waffle iron that you can find elsewhere on printables. Children love pushing down on the top…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
This is a screen magnifier for the Playdate handheld. It works, but I couldn't find larger lenses. This project will be in the public domain. .step file and .stl file included. 3D printed parts might scratch Playdate shell. It did not…
Print approx. €2.37–€2.90 excl. taxPreliminary estimate for one variant
Hi James, yep I do have these models I have other additional characters as well if you need one in particular, Check the sizing suits your needs and post some pics if you do take the challenge on to print these, Cheers Jace ; ) The seam…
Here are some cute Halloween-themed cutters that you can use either for cookies or playdough. This is my first attempt at making cutters like this so I definitely welcome any feedback you have! Important : Not all cookie recipes hold…
Einfacher Wandhalter für 1-5 66mm Spraydosen. 12.06.22 - Adapter für 33mm Dosen hinzugefügt. Simple wall mount for 66mm aerosol cans. 06/12/22 - Added adapter for 33mm cans.
Best printed at 0.2mm layers with 10% infil.
Prints best at 0.2mm layers with 10% infil.
COOKIE CUTTER - PLAYDOH - KINETIC SAND - CLAY - STAMP - TOY BAKING: 🍪 Perfect for: ✨ Sugar cookies 🧑🍳 Gingerbread 🍂 Shortbread Pro Tip: 🪄 Lightly flour edges for clean releases every time! CRAFTS & PLAY: 🧩 Shape clay, playdoh, or kinetic…
Destiny 2 Cayde 6 wearable cosplay mask
You can spin a lump of plasticine through the rollers and get a flat, rolled-out dough. It works like a pasta machine. In addition to the pressure parts, you also need 9 screws (M3 x 22mm).
This is a playdoh MegaExtruder that uses an auger to push the dough through the shape templates. It features a kid friendly crank that is geared down to help make it easier to turn. The gearing is external and oversized to make it more…
An old design I made in High School! From Thingiverse: This is my personal rendition of what I think Cayde-6's hunter knife would look like. I have named it the "Ace of Blades". Enjoy! 1:1 Scale Category: 3D Printing
Level up your sensory play! 🧱✨ These 3D-printed cube stamps are sized perfectly for toddlers and young children, these cubes feature deep-relief designs that leave satisfying impressions in play dough, modelling clay, salt dough, or…
Remix of WinterHawk904's model, separated into blade, grip, and ring for easier single-color printing or printing on smaller beds. Added indexing holes between each part to make gluing easier. Also modified the spade logo on the blade to…
Dieses Modell ist für 3 Spraydosen mit einem Durchmesser von 67mm ausgelegt.
Halloween bones cutter - perfect for cookies, fondant, playdough, polymer clay
Halloween candy cutter - perfect for playdough, cookies, fondant, polymer clay
This is a Controller style grip for the Playdate! It should improve ergonomics for longer cranking sessions and one of the models has a slot for a booklight to clip onto as pictured (though I like to tape mine on for a little extra…
easy print, no supports - 31.10.2026 next stamps
This model has been ripped from the Payday 3 game files. All credit/ support should be directed to Starbreeze Studios. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
This is a very basic mold of a banana, inspired by a post I saw of someone making molds. It's intended for playdoh, but the main purpose was to learn a few new techniques in Fusion 360, specifically around built-in alignment methods and…
I wanted a quick way to protect the screen of my PlayDate console when I threw it in my bag. This uses 5x5mm magnets to hold itself to the front (or back) of the PlayDate handheld. If you aren't aware of the Playdate, go check out…
Can be printed for just the Playdate or for Playdate with cover. Should be printed with infill (10% should do) but does not require supports.
Clay stamp for playdough featuring Cub Scout symbols / Sellos para arcilla o masilla con simbolos de lobatos Scouts
I noticed that my playdate handle had cracked after a year of cranking so I made a replacement. Make sure you take out the bar magnet from the original Playdate handle and insert it into the new handle before screwing it on.
Remix of the Rugged Box model, insert 10mm thick foam to prevent clicking the power button. Assemble using 6 M3x30 bolts
Mount for the Panic Playdate on the Ikea Skadis
Spraydosen Halterung 65 und 68mm, Version für Ikea Skadis hinzugefügt Wenn dir mein Modell gefällt, würde ich mich über ein Like freuen If you like my model, I would be happy about a Like
UPDATE: In the BOM I changed the 6mm to 8mm M2 screw as this is the correct variant! Sorry for the error. A compact snap fit attachment using a standard AAA battery with a LED that swivels over the screen to provide a frontlight for the…
A 1:1 3D-printable dummy Playdate console that's useful for prototyping accessories or as a fidget toy while you're waiting for your real Playdate to arrive. 🌐 More information about the Playdate console can be found at https://play.date/…
Peppa Pig bookmark that can be added to your keys/schoolbag and used as a playdough press. Printer at 0.24mm on an 0.4 nozzle. 15% infil with Pink Fil X PLA
This is a 3D model Low Poly version of the DeadWish Skull mask from PAYDAY 2 , featuring a printable version and the original in-game model .obj . Great for wall decor and cosplay. Please note that the printable version has minor…
A 2 part snapping case case for the Panic Playdate. Inspired by the Playmate cooler.
You can choose which way to insert the playdate - with the ports accessible, or not. Should slide in and out easily, but not by accident. Proudly made in Tinkercad! If you want to make your own version see…
Print your own 1:145 scale model of the Stearman PT-17 aircraft! The Boeing-Stearman PT-17, commonly known as the Stearman, was one of the primary trainer aircraft for the U.S. Army Air Corps and U.S. Navy during World War II. It was used…
Benjamin Gunnar/Cayden/Kratos/Akela Magazine Organizer. This is for 22 caliber mags. May also work with similar Reximex mags. The tray nests in the lid when shooting. I updated this with additional lids (text) for the Akela, Cayden, and…
Easy to print, no support needed.
This model has been ripped from the Payday 3 game files. All credit/ support should be directed to Starbreeze Studios. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
First of all, I did not model this mask myself, all props go to Valertale and you should definetly check out his profile. I just added some depth and details like wrinkles, creases and the scar in blender. The original model seemed to…
Spraydosen Halter für Dosen von ca 50-66mm Durchmesser, ideal bei Farb und Autopsraydosen
This is a simple rolling pin for playdough that can be used to make kid friendly noodles. It's a quick print at 0.25 (under an hour on the MK4S) and it's sturdy enough for repeated play. Printing instructions: Print vertically - I used…
I liked the original Pasta Machine for Playdough by edelsteff a lot but ran into the problem where, sometimes when the play dough gets really old and tough, the crank would spin free, meaning the self-tapped thread inside the roller had…
EN: Print Settings No supports required (Print-in-place design) Infill: 15% Gyroid Layer height: 0.2 mm (Variable layer height can be used for smoother surfaces) Perimeters: 2–3 walls About the Set The set includes molds for: Cube,…
Crinkle Cutter model that can be used for little kids to cut playdoh with Print Settings printed at .2mm layer height any infill no supports brim optional Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No…
I really liked how well the original design worked; I just slightly tweaked it to make it look more round and to use about 40% less material when printing. (Original can be found here:…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Claydol, Tabletop DnD miniature 50 mm Large base which can be used for DnD and other Tabletops.
insta360 camera holder integrated with waydoo remote control Model printed from PETG. Fits original Invisible Selfie Stick Insta360. Connect the holder to the remote control using a cable tie, and attach the selfie stick to the bottom of…
Scroll down for the english translation… “ JAYDEN ” als druckbare LED- Namenslampe. Druckeinstellungen: Infill 8%, no Supports, 0.2 mm (Möglichst die Z-Naht so verstecken, dass sie an den Klebepunkten ist.) PLA (nicht UV-beständig, besser…
Turn playtime into a buzzing mini adventure with this insect-inspired activity cube 🐞🎲 Each side reveals a tiny world of bugs and textures, inviting kids to explore, press, and create while discovering the fascinating shapes of nature.…
I just got my Playdate in the mail, and I'm so excited! I'd love to make some accessories for it like a protective case and wall mount, so I made this dummy model in Fusion 360 so I can make sure my accessories fit perfectly. I'm…
Hi Adrian, yes I do have this mask. there are some errors around the back I tried to fix as best i could. It was a little rushed sorry. Hope it works for you and as always check the sizing suits your needs, Please post some pics if and…
Enhance AAC learning with these core word play-doh stamps for a specific vocab set. Best printed standing up build plate supports only.
Tired of not knowing where to put your Stokke Tripp Trapp tray when it’s not in use? Meet the TrayDock for Tripp Trapp — a pair of smart, spring-loaded clips that let you neatly store the tray behind the chair’s backrest, always within…
There are 2 versions, I first designed and printed the angled design and figured a more square one would be better, I have yet to print it so let me know if there are any issues. Holes are sized to take a 3 high stack of 5mm magnets, each…
A client asked me to create them a 58mm x 58mm Circle Stamp with a Star on it. Suggested Printing Options: - 0.2mm Layer Height - 5-10% Infill - Ironing (This fills gaps in to help prevent clay from getting stuck)
I wanted to start my NAS project with NAS ITX PC case by @haydnbao https://www.printables.com/de/model/590711-nas-itx-pc-case-with-stackable-expansions I just wanted to start with two hard drives and didn't want to print the whole lower…
if you need an all-in-one clay tool then think no more it offers angle tools separation pieces and 2 rollers I encourage you to remix this model for roller needs use petg or abs
This model has been ripped from the Payday 3 game files. All credit/ support should be directed to Starbreeze Studios. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
A playdate stand at an angle of 20 degrees so that the lightbar on your monitor will perfecty illuminate the display, making it a very pretty clock. Additionally it can also hold the cover flap for displaying it at a more upright angle.…
You'll need ABS or PETG filament for the hinge.
My kids loves to play with playdough with stamps. I've created this set for halloween. Please, share your print, i'd like to see your make. See also full sets of pumpkins , bats , skulls , ghosts play-dough stamps. Halloween style clay…
A playdoh press I designed for my daughter. It's a lot like the ones one can buy at a store (but where's the fun in that?). It comes with a dozen tips that hold securely and should be easy for small hands to remove. Some of the smaller…
Designed this to press bezels onto my DayDate 40 with a normal Vise. Also suitable for watches with a similar diameter.
This model has been ripped from the Payday 3 game files. All credit/ support should be directed to Starbreeze Studios. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
A client asked me to create them a 58mm x 58mm Circle Stamp with a Lightning Bolt. Suggested Printing Options: - 0.2mm Layer Height - 5-10% Infill - Ironing (This fills gaps in to help prevent clay from getting stuck) I have other stamps…
Ich hatte das Problem, dass ich in meinem Regal mit den Spraydosen immer wieder den Überblick verloren habe. Also habe ich eine Möglichkeit gesucht die Spraydosen übersichtlicher zu lagern. Das ganze möglichst als Bausatz System, also…
Einfacher Spraydosenhalter 3st. oder Wandfach Ist für Große Spraydosen geeignet 67mm durchmesser a 3St. L:218xT:78xH:100 Wandmontage mittels 3x4 Senkkopf Schrauben.
Playdate cover for flexible material printing. Using reference playdate model https://www.printables.com/model/198263-model-of-playdate-console-for-making-accessories-i There's a lip around the opening to hold device inside. No support…
I found the Playdate a little sharp around the edges, in addition to being very tiny. Long sessions would make my hands hurt, so I designed this grip case for it. Includes holes for plugging in USB, headphones, and a slot for the…
Print with supports. 0.2 mm layer height should fist just fine.
My son tried his hand at tinkercad. His newest creation are cookie cutters. I gave it a nice rendering. Hope you like it.
Hi! I recently received a panic playdate, and loved the aesthetics of the clock. I had a browse of the available models and none of them seemed to do a simple stand without additonal material requirements. The cover which came with it…
A client asked me to create them a 58mm x 58mm Circle Stamp with “Happy Birthday” written on it. Suggested Printing Options: - 0.2mm Layer Height - 5-10% Infill - Ironing (This fills gaps in to help prevent clay from getting stuck) I have…
Hello everyone here is another one from series clay playdoh fun. this time wanted to make something mechanical as learned recently some gear stuff. there we have outcome adjustable roller/press for equal layer of clay or playdoh. designed…
Bring some prehistoric fun to your sensory bin! This TOM t Lizard Stamper is designed specifically for sensory play acti
Second Update to my previous Controller Grip for use with the Playdate Case! A metal plate is still part of the grip so that the case magnetically mounts to it just like it does on a fridge or other magnetic surface. The ones I used are…
Project is not endorsed or affiliated with Panic. Update: Added a 116mm version that might add more comfort, especially if you have smaller hands. This is a mod that allows you to customize your Playdate to be roughly the size of a…
Hi I design this button for VIKO Lighting Switch Button. Enjoy Merhaba Viko aydınlatma anahtarı için dizayn ettim İyi Günler
A magnetic charging stand for the Playdate . It uses 9 6x3mm round magnets: https://www.amazon.com/gp/product/B07873ZCY4 The magnets are connected to a standard 5v USB 2.0 charging cable (red goes to the top magnet and black goes to the…
Added mount for bottom screw from controller and ziptie around pole cylinder. Printed in PC and 25% infill.
The source marked this model as adult content.
Press fit as shown in the image. I'll be updating the model in the future to make it more secure.
A neat little folding travel case for the Playdate! I've included a little bit of space on the top and bottom for a sheet of felt to protect it, and the circular pockets inside the case are for a magnet to keep it closed. I haven't tried…
Made this for my brother for his first childs first christmas, his name isn't really available to much.
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
This is a remix of @LineArcLine's great Magnetic Cover for Playdate . If you aren't aware of the Playdate, go check out https://play.date/. I wanted a lower profile cover than the original. This remix contains the following benefits: Low…
