Counting matching models…
This is a battery holder for Einhell 18V batteries. I have developed it on a Einhell battery. Special feature: This holder uses the original locking mechanism of the Einhell battery. Secure hold. Material: PETG Layer: 0.2mm Nozzle: 0.4mm…
Hi! Hier ist mein Batterie Halter für die großen Milwaukee M18 Akkus! Ich habe es mit PETG gedruckt und habe Supports zwischen den Schienen gedruckt (siehe Bilder) Ich habe die Version verbessert da noch ein kleiner Fehler sich…
This is a battery holder for Makita 18V batteries. I have developed it on a normal battery. Special feature: This holder uses the original locking mechanism of the Makita battery. Secure hold. My recommendation for the print settings:…
Milwaukee M12 batteryholder - Mountes with two screws - Vertical or horizontal
Easy battery holder for the IKEA SKADIS pegboard
This is a battery holder for Milwaukee 12V 2.0Ah batteries. I have developed it on an 2.0Ah battery. Special feature: This holder uses the original locking mechanism of the Milwaukee battery. Secure hold. Note: Does not fit for 4.0Ah…
Matching Battery holder for AA here https://www.prusaprinters.org/prints/44599-batteryholder-aa-for-ikea-skadis
This is a battery holder for Bosch Professional 18V batteries. I have developed it on a ProCore battery. Special feature: This holder uses the original locking mechanism of the Bosch battery. Secure hold. My recommendation for the print…
This is a battery holder for Einhell 18V batteries. I have developed it on a Einhell battery. (Long Version) Special feature: This holder uses the original locking mechanism of the Einhell battery. Secure hold. Material: PETG Layer: 0.2mm…
This is a battery holder for Milwaukee 12V 2.0Ah batteries. (Long Version) I have developed it on an 2.0Ah battery. Special feature: This holder uses the original locking mechanism of the Milwaukee battery. Secure hold. Note: Does not fit…
This is a battery holder for Bosch Professional 12V 2.0Ah batteries. I have developed it on an 2.0Ah Professional battery. Special feature: This holder uses the original locking mechanism of the Bosch battery. Secure hold. Note: Does not…
About: When I got into 3D printing in 2019, the models were ASAP. ASAP = As Simple As Possible. The old AA battery holder originates from this time. This principle has not necessarily changed but I gave myself the challenge to use even…
This is a battery holder for Makita 10.8V batteries. I have developed it on a normal battery. Special feature: This holder uses the original locking mechanism of the Makita battery. Secure hold. My recommendation for the print settings:…
This is a battery holder for Makita 18V batteries. I have developed it on a normal battery. (Long Version) Special feature: This holder uses the original locking mechanism of the Makita battery. Secure hold. My recommendation for the…
This is a battery holder for Bosch Professional 12V 2.0Ah batteries. I have developed it on an 2.0Ah Professional battery. (Long Version) Special feature: This holder uses the original locking mechanism of the Bosch battery. Secure hold.…
This is a battery holder for Bosch Professional 18V batteries. I have developed it on a ProCore battery. (Long Version) Special feature: This holder uses the original locking mechanism of the Bosch battery. Secure hold. My recommendation…
This is a battery holder for Makita 10.8V batteries. I have developed it on a normal battery. (Long Version) Special feature: This holder uses the original locking mechanism of the Makita battery. Secure hold. My recommendation for the…
3 Versions of a batteryholder for use with battery spring contacts like these
Made a Batteryholder for CR24XX & CR20XX. Maximum is CR2450 and CR2032. You can modify the .3mf for your needs. You can make a color change on the writing on top. is a very easy print. Printed mine in PLA with no special settings.
Added "Rechargeable" embossed text
Schraubbare und Verbindbare Akkuhalter passend für Einhell Power X-Change Verbesserungsvorschläge sind gerne erwünscht. Screwable and connectable battery holder suitable for Einhell Power X-Change. Suggestions for improvement are welcome
This is a remix of Wojteks model. I wanted to have a very clear identification about the charging status of the batteries. The status is identified by the covering flags. Parts are properly oriented, just drop them in your slicer and you…
Batteries not included. Dont forget to add bed support
Batteryholder for 18650 and 21700 Batteries
I love to make useful 3D Desgins, and i love Coffee: Buy me a Coffee: https://www.buymeacoffee.com/phitscho Or Twint me something over 078 713 68 61 THANKS! Batteryholder for the Happymodel Mobula 6 It is designed to hold 1S 300mah 75C…
Battery Holder für Batterien ( AAA, AA, 9V)
Akke Halterung für alle Dewalt Akkus der XR Generation
After I accidently dropped my LiIon battery holder for 2 18650 I did not want to fix this by scotch tape or similar. So I designed a new lid, printed it, little file-off work and here it is! Advantage is if you have several of these…
EIn einfacher AA Batteriehalter mit Löchern für die Schraubmontage. Als Kontakte kommen Platten der Abmessungen 12x12mm zum Einsatz
NOT TESTED designed for AAAA batteries with. R 8,3 mm L 42,5 mm
There's plenty of holders around web, but I didn't find angled ones that would have easy access to battery level indicator button/display. So I created one. There's model for screwing invidual holder to wall and wallplate to fix four of…
One can use the model as a connector cover when the battery is not in use. But it's more meant to be remixed with other ideas. Use it and share your work!
Simple Adapterbox for the smaller 6V Batteries. The original Rubberguides on the Sides must be removed Print Settings Printer: Prusa mini+ Rafts: No Supports: No Resolution: 0.2 Infill: 15% Category: Automotive
I made a simple replacement for the batteryholder of a SIP22 car key.
Für die deutsche Beschreibung bitte nach unten scrollen Lever for Batteryholder This is a simple lever to operate the switch integrated into the battery holder. It was mainly designed to be able to operate the LED of the red dot sight…
This a remix of two models I made. Now the controllers and batteries are all together. The third battery holder on the top was printed separately and then glued to the model. The model fits under the headstrap.
You can print it laying down or standing. If you do it laying down, you have to use supports or else it wont print correctly Other print settings dont matter too much, you just have to use a bit of a higher infill, so it doesnt break when…
A Bosch Power4All Battery holder for Sy's Peglock System.
Battery holder for Bosch 3.6V and Bosch/Dremel 12V. Left and right extentions are optional and can be removed within the slicer.
remixed for AA und AAA Batteryholder
Holes for Batterystraps have to be widened, added foam so the battery wont get scratched, Receiver relocated to where battery was at. Category: R/C Vehicles
Gridfinity coin battery holder made for a set of batteries from Lidle, the square space is to hold something like a toothpick or a sim card tool to help you get battery out.
It is a simple battery holder. I designed it for my lab so i can store every battery seperatly and not in a box where all are mixed.
A basic build to which additional printed accessories can be added. In the future, I will be adding more accessories such as a box for bits, drills, etc., but the basic build will still be the same.
This is a battery holder and it can hold not only AA batteries but also for AAA batteries! Soon V2!
BatteryHolder_RSPRO_2378296_1x1220
I needed a slightly lower rear batteryholder for my reciever. added extra mounting holes for longer pistons. I used PLA, 0,4mm Nozzle, 0,16mm Layer, 2 walls, 15% infill
Gridfinity coin battery holder made for a set of batteries from Lidle, the square space is to hold something like a toothpick or a sim card tool to help you get battery out.
This is a remix of Wojteks model. I wanted to have a very clear identification about the charging status of the batteries. The status is identified by the covering flags. Parts are properly oriented, just drop them in your slicer and you…
