P
Printables
Gridfinity BatteryHolder Lidle
Gridfinity coin battery holder made for a set of batteries from Lidle, the square space is to hold something like a toothpick or a sim card tool to help you get battery out.
Search results: batteryholder
Counting matching models…
P
Printables
Canon LP-E6 double batteryholder
This is a remix of Wojteks model. I wanted to have a very clear identification about the charging status of the batteries. The status is identified by the covering flags. Parts are properly oriented, just drop them in your slicer and you…
P
Printables
Parkside_Toolbox_20Vbatteryholder
A basic build to which additional printed accessories can be added. In the future, I will be adding more accessories such as a box for bits, drills, etc., but the basic build will still be the same.
P
Printables
Gridfinity BatteryHolder Lidle
Gridfinity coin battery holder made for a set of batteries from Lidle, the square space is to hold something like a toothpick or a sim card tool to help you get battery out.
P
Printables
Batteryholder for 18650, AA and AAA
It is a simple battery holder. I designed it for my lab so i can store every battery seperatly and not in a box where all are mixed.
P
Printables
Batteryholder for Einhell Power X-Change
Schraubbare und Verbindbare Akkuhalter passend für Einhell Power X-Change Verbesserungsvorschläge sind gerne erwünscht. Screwable and connectable battery holder suitable for Einhell Power X-Change. Suggestions for improvement are welcome
P
Printables
Sy's Peglock - Bosch Power4All 18V Batteryholder V2
A Bosch Power4All Battery holder for Sy's Peglock System.
P
Printables
BatteryHolderV1
This is a battery holder and it can hold not only AA batteries but also for AAA batteries! Soon V2!
P
Printables
Batteryholder for BOBOVR B2 Battery Pack
One can use the model as a connector cover when the battery is not in use. But it's more meant to be remixed with other ideas. Use it and share your work!
P
Printables
Meta Quest 3 Controller Holder v2.0 with Batteryholder for BOBOVR B2 Battery Pack
This a remix of two models I made. Now the controllers and batteries are all together. The third battery holder on the top was printed separately and then glued to the model. The model fits under the headstrap.
P
Printables
Batteryholder Bosch 3.6 and Bosch/Dremel 12V
Battery holder for Bosch 3.6V and Bosch/Dremel 12V. Left and right extentions are optional and can be removed within the slicer.
P
Printables
Makita 18V - Angled single batteryholder model and wallplate adapter for 4pcs
There's plenty of holders around web, but I didn't find angled ones that would have easy access to battery level indicator button/display. So I created one. There's model for screwing invidual holder to wall and wallplate to fix four of…
P
Printables
AA Batteryholder with screw holes
EIn einfacher AA Batteriehalter mit Löchern für die Schraubmontage. Als Kontakte kommen Platten der Abmessungen 12x12mm zum Einsatz
P
Printables
Batteryholder AAAA for IKEA SKADIS
NOT TESTED designed for AAAA batteries with. R 8,3 mm L 42,5 mm
P
Printables
Sprint 2 Batteryholder
Holes for Batterystraps have to be widened, added foam so the battery wont get scratched, Receiver relocated to where battery was at. Category: R/C Vehicles
P
Printables
Honda Dax Batteryholder 6V
Simple Adapterbox for the smaller 6V Batteries. The original Rubberguides on the Sides must be removed Print Settings Printer: Prusa mini+ Rafts: No Supports: No Resolution: 0.2 Infill: 15% Category: Automotive
P
Printables
MakitaBatteryHolder
You can print it laying down or standing. If you do it laying down, you have to use supports or else it wont print correctly Other print settings dont matter too much, you just have to use a bit of a higher infill, so it doesnt break when…
P
Printables
Repair or Spare Lid for BatteryHolder 2x18650 LiIon (Batterie Deckel)
After I accidently dropped my LiIon battery holder for 2 18650 I did not want to fix this by scotch tape or similar. So I designed a new lid, printed it, little file-off work and here it is! Advantage is if you have several of these…
P
Printables
Milwaukee M18 BatteryHolder
Hi! Hier ist mein Batterie Halter für die großen Milwaukee M18 Akkus! Ich habe es mit PETG gedruckt und habe Supports zwischen den Schienen gedruckt (siehe Bilder) Ich habe die Version verbessert da noch ein kleiner Fehler sich…
P
Printables
Batteryholder for Car Key SIP22 (FIAT Citroen Peugeot Iveco Lancia)
I made a simple replacement for the batteryholder of a SIP22 car key.
P
Printables
Canon LP-E6 double batteryholder
This is a remix of Wojteks model. I wanted to have a very clear identification about the charging status of the batteries. The status is identified by the covering flags. Parts are properly oriented, just drop them in your slicer and you…
P
Printables
Batteryholder AAA for IKEA SKADIS
Matching Battery holder for AA here https://www.prusaprinters.org/prints/44599-batteryholder-aa-for-ikea-skadis
P
Printables
Lever for batteryholder with integrated switch
Für die deutsche Beschreibung bitte nach unten scrollen Lever for Batteryholder This is a simple lever to operate the switch integrated into the battery holder. It was mainly designed to be able to operate the LED of the red dot sight…
P
Printables
Batteryholder for CR24XX & CR20XX (in my case CR2450, CR2430, CR2032 &CR2025)
Made a Batteryholder for CR24XX & CR20XX. Maximum is CR2450 and CR2032. You can modify the .3mf for your needs. You can make a color change on the writing on top. is a very easy print. Printed mine in PLA with no special settings.
P
Printables
AAA-Batteryholder
3 Versions of a batteryholder for use with battery spring contacts like these
P
Printables
Milwaukee M12 batteryholder
Milwaukee M12 batteryholder - Mountes with two screws - Vertical or horizontal
P
Printables
Rechargeable Batteryholder AAA for IKEA SKADIS
Batteries not included. Dont forget to add bed support
P
Printables
Batteryholder for the Happymodel Mobula 6
I love to make useful 3D Desgins, and i love Coffee: Buy me a Coffee: https://www.buymeacoffee.com/phitscho Or Twint me something over 078 713 68 61 THANKS! Batteryholder for the Happymodel Mobula 6 It is designed to hold 1S 300mah 75C…
P
Printables
Bosch Professional 18V Batteryholder
This is a battery holder for Bosch Professional 18V batteries. I have developed it on a ProCore battery. Special feature: This holder uses the original locking mechanism of the Bosch battery. Secure hold. My recommendation for the print…
P
Printables
Bosch Professional 18V Batteryholder Long
This is a battery holder for Bosch Professional 18V batteries. I have developed it on a ProCore battery. (Long Version) Special feature: This holder uses the original locking mechanism of the Bosch battery. Secure hold. My recommendation…
P
Printables
Bosch Professional 12V 2.0Ah Batteryholder
This is a battery holder for Bosch Professional 12V 2.0Ah batteries. I have developed it on an 2.0Ah Professional battery. Special feature: This holder uses the original locking mechanism of the Bosch battery. Secure hold. Note: Does not…
P
Printables
Makita 18V Batteryholder
This is a battery holder for Makita 18V batteries. I have developed it on a normal battery. Special feature: This holder uses the original locking mechanism of the Makita battery. Secure hold. My recommendation for the print settings:…
P
Printables
Makita 18V Batteryholder Long
This is a battery holder for Makita 18V batteries. I have developed it on a normal battery. (Long Version) Special feature: This holder uses the original locking mechanism of the Makita battery. Secure hold. My recommendation for the…
P
Printables
Einhell 18V Batteryholder
This is a battery holder for Einhell 18V batteries. I have developed it on a Einhell battery. Special feature: This holder uses the original locking mechanism of the Einhell battery. Secure hold. Material: PETG Layer: 0.2mm Nozzle: 0.4mm…
P
Printables
Einhell 18V Batteryholder Long
This is a battery holder for Einhell 18V batteries. I have developed it on a Einhell battery. (Long Version) Special feature: This holder uses the original locking mechanism of the Einhell battery. Secure hold. Material: PETG Layer: 0.2mm…
P
Printables
Bosch Professional 12V 2.0Ah Batteryholder Long
This is a battery holder for Bosch Professional 12V 2.0Ah batteries. I have developed it on an 2.0Ah Professional battery. (Long Version) Special feature: This holder uses the original locking mechanism of the Bosch battery. Secure hold.…
P
Printables
Makita 10.8V Batteryholder
This is a battery holder for Makita 10.8V batteries. I have developed it on a normal battery. Special feature: This holder uses the original locking mechanism of the Makita battery. Secure hold. My recommendation for the print settings:…
P
Printables
Makita 10.8V Batteryholder Long
This is a battery holder for Makita 10.8V batteries. I have developed it on a normal battery. (Long Version) Special feature: This holder uses the original locking mechanism of the Makita battery. Secure hold. My recommendation for the…
P
Printables
AA-Batteryholder by KMS
About: When I got into 3D printing in 2019, the models were ASAP. ASAP = As Simple As Possible. The old AA battery holder originates from this time. This principle has not necessarily changed but I gave myself the challenge to use even…
P
Printables
Milwaukee 12V 2.0Ah Batteryholder
This is a battery holder for Milwaukee 12V 2.0Ah batteries. I have developed it on an 2.0Ah battery. Special feature: This holder uses the original locking mechanism of the Milwaukee battery. Secure hold. Note: Does not fit for 4.0Ah…
P
Printables
Milwaukee 12V 2.0Ah Batteryholder Long
This is a battery holder for Milwaukee 12V 2.0Ah batteries. (Long Version) I have developed it on an 2.0Ah battery. Special feature: This holder uses the original locking mechanism of the Milwaukee battery. Secure hold. Note: Does not fit…
