Counting matching models…
I designed this motor cover to protect the motor from dirt and water. It's designed to clip onto the motor without the need for cable ties or additional mounts and it has proven to work extremely well. If you find this part useful please…
This is a magnet holder for the BBS02 magnetic brake sensors. It is designed to let you use the sensors on handlebar systems which have no good position to glue on magnets or the hall effect sensors. It is designed for a friction fit for…
Print in medium hard TPU, use circular top and bottom pattern. Print slowly. It's better to have a slight underextrusion than too much. The model is slightly thicker than the original (2 mm vs 1,5 mm) so it squishes it a bit to help…
Habe die Abdeckung aus PETG und die Dichtungen aus TPU. Achtung! der Deckel und die Dichtung haben zusammen eine Dicke von 6mm . Eventuell muss noch ein Abstand zwischen Motor und Kettenblatt aufgesetzt werden. Print instructions Habe die…
Hello, here is the Support Tube holder for Hailong Akku https://www.aliexpress.com/item/1005001315092775.html?spm=a2g0 Works with all bike down tube of constant 50mm mounted with cable ties printed with Caribou 220 Mk3S ( modded Prusa i3…
magnet holder for the BBS02 and BBSHD magnetic brake switch
Protect your Bafang BBS01, BBS02, or BBSHD motor with this 3D-printed guard, easily installed on your bike frame with simple zip ties. Designed to shield your motor from rain, snow, and mud splashes from the front wheel, it’s especially…
M4 hardware – M4x12 countersunk flat head (DIN 965 / ISO 7046) minimum and M4 nut. 32mm seat post, 36mm from seatpost to center of chain. Installed on Bafang BBS02B with stock 48T front chainring and stock chainring guard.
adapts a 110bcd road chainring to the bafang bbs02. The bbshd uses a different bolt circle diameter and center bore(smaller). works with a 36t ring, any smaller and the chain doesn't clear the spider. print flat side down, I used petg and…
This is a printed alternative for the pretty pricey center nut tools for the Bafang BBS01/BBS02 (A and B) motors. This tool works just as good and did a great job for me. You need 4 M3 hex nuts and 4 at least 35mm long M3 screws.…
This is a mount I designed to place the Eggrider V2 display directly above the left (or right) handle of my Catrike Dumont. It goes into the end of a 7/8" tube and should work for other trikes that use 7/8' handles. I wanted my display to…
I bought the nut removal tool and needed to put it on a torque wrench. I orderd the tool on alieexpress: https://nl.aliexpress.com/item/1005007179459286.html Print it with 10 walls. It will be totally filled and plenty strong
Printed from TPU, 0.4mm Nozzle, 0.16mm Layerheight They are a lil loose & need to be sealed with silicone CAD files at onshape
Made these simple molds to make silicone gaskets, but ended up just printing TPU gaskets since that seems to be the better material. Mold A is meant to be filled with silicone and just pressed into Mold B. Very simple. Very human design.
