Counting matching models…
Charybdis Ergonomic Keyboard An ergonomic keyboard with integrated trackball. Engineered to be a full mouse replacement solution with high-quality, custom-developed components. Print instructions Recommended settings: PLA - prusament and…
Prints in place. No assembly. *There was an issue in the face of the model that made it difficult to color in Bambu Studio. This was brought to my attention by @RealFakeDoors99_1577567. I believe that this issue was caused by a split I…
Extended version with wrist pads can be found here: Charybdis/readme.md at main · Bastardkb/Charybdis (github.com) I find a standard 30-degree stand is pretty aggressive, but flat also not working for me as well. This might be helpful to…
Remix of the original cups by Ari with more subdivisions for shallow divider cups. Helpful for low-quantity or really small parts. I'll upload more subdivision variations as I need them
Simple stackable subdivided token tray compatible with the simple token tray by Demokrit . Diameter, height and wall thickness can be adjusted if needed. The source file contains also parameterized body of the original tray, driven by the…
This is a wrist rest for the Charybdis and Scylla Keyboard from https://bastardkb.com/ . The bottom part can be printed in PLA or PETG, the top one I printed upside down with ziro 95A TPU with 2.1mm wall thickness, 0.75mm for the bottom…
3 lid versions available. LID for better transportability and stacking stability for the SPINNING FILAMENT SWATCH DISPLAY originally by Brad which you can find here:…
Helps to use the space in these bins a bit more effectively with smaller parts. 1, 2, 3, 4, 6, and 8-way bins, some can be mix and matched and used in one bin. Numbering marks in the bins are only to help with the order that these should…
Adapter that secures the LM18-LSI sensor lens, for the PMW3610 sensor, when used with the original BastardKB Charybdis trackball assembly.
These are subdividers for the “Hart Stack System 3 Case Parts and Tool Box Organizer, Fits Hart's Modular Storage System” which you can get from Walmart at the link below: Hart Stack System 3 Case Parts and Tool Box Organizer, Fits Hart's…
HEBDI is an insertion aid for the filigree charging cable of the iPhone or iPad, Samsung S7 and S8. Once mounted firmly to the cable, it simplifies insertion and removal of the charging cable. For whom? HEBDI is primarily intended for…
I received my copy of the Vampire the Masquerade: Chapters board game recently, and it's got a LOT of NPCs! The included storage has two spaces for those standees, but that's still 70+ standees that you need to search through to find the…
A more precise way to dial in your CR-10's bed. Fits over existing bed knobs. M4 threads have a 0.7mm pitch, so turning the knobs 1/7 of a turn will change the distance 0.1mm. I beveled the face and added numbers so you could read…
Simple storage box with 6 compartments for tokens and resources for any board game with lots of pieces or anything else you want to store. Lid slides in and closes securely. Print with zero top and bottom layers and your choice of infill…
I made these divider compartments to further subdivide Stanley brand organizer boxes. The kind you can find here:…
Harry Potter Wand Handle Subdivided for more detail. Larger size due to more triangles.
Selectagon is a fully modular storage system consisting of full and subdivide hexagon drawers they modules are intended to be glued together for a seamless look Category: Organization
Charybdis, the mythical whirlpool terror of the sea, sculpted as a dramatic fantasy figure. Perfect for displays.
Simple with a twist… yep
Midea PortaSplit Fenster Abdichtung
These tents were designed to allow for cables to pass under the keyboard and turn typing more comfortable. See original work from Keyboards - Bastard Keyboards - Split ergonomic keyboards (bastardkb.com) .
I've created this initially, but I found the position is not comfortable, so I moved on with further iterations, but you can try this. This is more flexible option: Scylla/Charybdis adjustable tenting stand by choovick | Download free STL…
GrandFather has created an amazing box organiser system for Ark Nova that has space for everything, but I wanted to separate the partner zoo and university tokens by type to make setup faster. This remix of the token tray splits four of…
AXII HD 2 patch mod for the DJI Goggles V2. If your running something like the BDI adapter for analog video and you still want to run the patches for your digital video this is the way. I printed the base in PETG and the Face in TPU. I…
these are for the v3 base plate https://github.com/Bastardkb/Skeletyl/tree/main/archive/V3 they have the honeycomb filled in to give better adhesion for magsafe sticker mounts there is a version that also adds 4-5mm of spacer to the plate…
Neatly divide a standard kitchen cutlery organizer to keep dessert spoons and forks in their place. Customizable so you can make the sizes you want. Corner hold-downs to keep the corners flush during the print. Print Settings Printer…
Hi! This is a generator for 2D subdivided surfaces An old script made with Processing ( http://www.processing.org ) a few years ago, now adapted to Openscad. This thing was the precursor of Futuristic Citybuider (…
Designed to be printed in vase mode (no top layer, 0% infill) and accept labels*. Labels are 15mm x 7.75mm
Abdichtung für Filamenttrockner Für die Verwendung mit unserer MMU haben wir uns einen Filamenttrockner und Trockenbox von Sovol gekauft, den ich für die direkte Verwendung ein klein wenig modifiziert habe. Ich habe die…
I have the Ross-Tech VCDS cable and it gets dirty in my garage so I created this in Tinkercad. I had to redo it recently as when I attempted to print, it didn't fare well. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts:…
This box was designed to fill a gap in my drawer that already had a cutlery drawer liner. Because the drawer has a rounded inner edge I angled one side wall of the box a bit. The box is subdivided into one large and one small compartment.…
VASE MODE, a nice vase I designed in blender. it's a birthday present print triangulated version, the other one has problems slicing (parts where the printhead moves very slow and leaves marks Category: Decor
Like my older model, but for larger pads, which gives it more versatility. Pads examples: https://www.aliexpress.com/item/1005005598462912.html https://www.aliexpress.com/item/1005004557222656.html Other model:…
insert for medium and small boxes for sorting small parts
Loosely based on the PI card deck case by dktosoch on thingiverse (https://www.thingiverse.com/thing:2844013) this is a completely scratch modeled design that incorporates space for an OBDII connector at the rear and a seed studio CAN-FD…
Remove the OBDII socket from the housing and insert it at a 90-degree angle using an adapter. Now you can close the fuse cover and have the scanner permanently installed. Use supports and 0,2 mm layer height.
Here's a basic square Polypanel subdivided. I use it for my pens and desk tools Print instructions No special print instructions https://www.myminifactory.com/object/3d-print-polypanels-square-89425
photogrammetry model of chlorophyllum molybdites before the vale breaks. photo is of the 3d model before making print ready. haven't personally printed yet. my first model. will update if successful
This is a scaled model of a subdivided apartment, regular apartment and furniture I designed for my PYPx school project. This is a great model to demonstrate the average and subdivided living spaces for a family of four in Hong Kong.…
USBdisk holder for table 2x M3
Distanzhalter für Pflanzkorbhalter auf dem Balkon
A pegboard holder for the AMTIFO OBDII Code Reader. Print with supports. Yes, I definitely should have dried my filament before this print! Designed for this one from Amazon, but may fit others: https://www.amazon.com/gp/product/B09TQCLDCZ
chlorophyllum molybdites. toxic look alike to the delicious shaggy parasol mushroom. i filled in the gaps with a textured sphere.
This is designed to subdivide an existing gridfinity box. It will nest in the "efficient floor" boxes models generated by Gridfinity Extended ( https://gridfinity.perplexinglabs.com/pr/gridfinity-extended/0/0 and/or…
I found the 'T' and 'Y' Keys a little far away when typing flat so made these "Tilt Risers". I lifted the inner back corner about 25mm then tilted foward and lowered outer corners as much as i could without having to add more height to…
A pro micro NRF 52840 / Nice! nano holder for handwiring a Scylla / Charybdis Based on the NRF 52840 holder from https://ryanis.cool/cosmos/beta https://github.com/rianadon/Cosmos-Keyboards Original step file is licensed under CC0 1.0 The…
This is the result of exploring the ring from the Tipping Point VRC game aiming to print some efficiently. It holds together of its own accord unless knocked. A dab of glue should seal the deal. I printed four copies here fast with a…
Center marker for multiple subdivisions. Center markers are ok if you only want the middle, but as soon as you need another uniform subdivision, things won’t work anymore. This is due to the cylinder-shaped guide, which induces errors…
I recently designed and manufactured this case for my (H)yper (T)ough 300 OBDII that I purchased from Walmart for under $50. As you can see I have provided a little cheat sheet on the front cover of this model, when you run a code you…
Remixed the charybdis BTU holder to fit siderakb PWM 3610 / 3360 PCB Requires 3x M3 heatserts, holes are 4mm diameter and 4mm deep, any heatsert that fits that will work. Original file…
A simple Visual circular patterning tool to help subdivide features on radially symetric pieces! when I took up wheel pottery I needed something to help me put stamps on my pieces
Created some new keys that are based on the Craig Andrews set. I use the Charybdis flat without tenting with the DES keys, this raises and tilts some of the keys for the index and pinky so they can be reached easier and feel far more…
Haben Sie auch Fensterfalzlüfter in Ihren Fenstern, die zwar eine Zwangslüftung sicherstellen sollen, allerdings sind es viel zu viele und sie lassen unnötig viel Lärm und Kälte herein? Dieser Block Plastik (PLA/PETG; 10% kubische…
A Christmas edition of Charybdis, the legendary whirlpool monster from Greek myth. This is designed as a dramatic display creature for ocean-themed dioramas, fantasy collections, and mythology monster sets.
This is the result of exploring the ring from the Tipping Point VRC game aiming to print some efficiently. It holds together of its own accord unless knocked. A dab of glue should seal the deal. I printed four copies here fast with a…
This is designed to subdivide an existing gridfinity box. It will nest in the "efficient floor" boxes models generated by Gridfinity Extended ( https://gridfinity.perplexinglabs.com/pr/gridfinity-extended/0/0 and/or…
Charybdis, the mythical whirlpool terror of the sea, sculpted as a dramatic fantasy figure. Perfect for displays.
Remove the OBDII socket from the housing and insert it at a 90-degree angle using an adapter. Now you can close the fuse cover and have the scanner permanently installed. Use supports and 0,2 mm layer height.
Update: tried in keyboard and did not work since it was too far away from the trackball. New version (v5) should address this issue. but you need to print a remixed version of the adapter_v4_bottom as well! It is still not perfect, but I…
The OBDII socket hole is designed to use the OBDII socket from a Volvo 960. The original ashtray front trim piece needs to be removed from the original ashtray and attached to this one. Some trimming may be needed on the side tabs to get…
A less dramatic tent for the Charybdis Mini with trackball (3x6). Mirror the left tent in the x axis when printing. I used 15 infill.
