Counting matching models…
Toy Binoculars for Kids Coudln't find any good toy binoculars with eye spacing that worked for kids, so I made my own. I copied some aspects of a few different binocular designs I found out there. I modeled the support piece in already.…
Documentation Updates Model Version Date Description 1.02 9/3/24 Added to the errata a workaround to close the gap between the right eyecup base and the adapter base. I realized this hole could allow dust to get on your lens. I'll close…
TD2.3 Electrobinoculars Production information Manufacturer Neuro-Saav Corporation Model TD2.3 Electrobinoculars Type Electrobinoculars Cost c. 100 credits Physical & Technical Specifications Length c. 0.25 meters Weight 0.7 kilograms…
Millimeter for millimeter a copy of the typical LEGO binocular accessory. One file is the 1:1 scale replica of the original. The second file is a 4.85:1 scale to fit my wooden articulated version of a LEGO minifig. Photos show it holding…
If you like what I do and want to support my work check out my Patreon!
This model is compatible with the lego system.
I needed some toy binoculars for a kids spy birthday. Also wanted the kids to actually be able to use them. This is rev 1, printing now, may have to adjust how far apart they are. Print instructions Category: Toys & Games Print Settings…
Binoculars - dollhouse accessory
Designed this prop opera glasses / theater binoculars for a friends birthday. There are holes so you can look through them. I printed them "looking" upwards. Supports are needed for the middle bit and under the arm. Enjoy! Category: Props
Remixed from Thingiverse model by efrias and jnavarro1178 Lets you change the diameter to fit your binoculars using the customizer. Has nubs inside the holder for a smooth fit on soft lens border, as found on Orion Mini Giant binoculars…
Scale up as desired for a full size print! I printed theses at 600% with default 0.3m draft settings, easy print with some supports required
Binoculars for children. It is a toy for children aged about 3-4 years.
Here's my version of Kenobi's Binoculars that he used in the new Kenobi Trailer. Category: Props
A simple but good looking pair of Print-in-place binoculars with 2 styles for any figure within Soozafone's LUCKY 13 family. Print: 30mins max (highest quality) LUCKY 13 family: https://www.printables.com/@soozafone/collections/955062…
10-6-21 Added remix credit to Slangfil since his design is similar and earlier dated. Unintentional remiss on my part. 9-22-21 Added a smoothed version for little hands. Kids pretend binoculars using toilet paper rolls. 42mm diameter…
Ready to build your Magic? Download the files here and visit https://analogsky.co/magic-build for course access. Ready to make Magic? Download the files here and visit https://analogsky.co/magic-build for course access.
This model is compatible with the lego system.
WORK IN PROGRESS! BE SURE TO CHECK THE SCREW CLEARANCE ON THE PHONE MOUNT, SO IT DOESN'T SCRATCH THE BACK OF YOUR PHONE. I wanted to get the phone closer to the lens, It also makes the design simpler. I also edited the clamp for my…
Remix of ReProp's Kenobi Binoculars. I added a dial on top and on the right side, as well as a space for a blue LED, reshaped the front panel, and decreased the overall height. On my print, I have a small magnet under each dial to hold…
Universal binoculars adapter for smartphones
I got a red dot finder with a telescope - don't even know what this mount is properly called though it seems common. Looks a lot like a "Celestron Star Pointer" but is not branded. It looks very similar to the "Orion EZ Finder II…
Solar Filter for Binoculars 15x70 or 20x80 and 10x50 use with BAADER AstroSolar Safety Film (OD 5.0) Use a tap to create a thread for screw FreeCad source Category: DIY
Do you love Toy Story and Lenny the binoculars then you will love this 3d print file.
GoPro Adapter for Binoculars (Parametric) This is an adapter for having the GoPro film (coaxially, normally) through its own lens while mounted to the binoculars. It is not an adapter for shooting through the bincoular optics themselves!…
I wanted another prop to use with my Star Wars Rebel Legion Resistance Trooper costume for a Blaster-Free troop so I designed these Star Wars-ish looking binoculars. A bit of acrylic paint for weathering and a bit of leather attached with…
Ready to build your Sunny? Download the files here and visit https://analogsky.co/sunny-build for course access.
Print out in something mechanically strong. You'll have to provide your own camera mounting screw of course, screw into the standard mounting screw most binoculars have in the front (you'll probably have to remove the cover first). You…
this is an eyepiece for machinist pocket microscope, probably it fits various other equipment, scale it up as you like 1:1 scale drawing is on the photo so it is easily scalable within slicer software to match your needs, just do the…
Opera Glasses. There are a few versions with and without stick, and with and with out stick cover. Made for my wife. Two versions one with a lower poly count.
Background An old coworker told me the adjustment ring for the binoculars eye piece, which helps with focusing, broke and asked if it was possible to 3D print a replacement. Apparently when he contacted Nikon if they had replacements, he…
Astronomy red dot finder holder for big binoculars 20x80 (25x100) or similrar types Other componets: 7x M3 srcew 5x M3 nuts 1x Red Dot Finder Note: Use a tap to create a M3 thread in the dovetail For Binioular 15x70 see:…
NATO/Picatinny Rail for Binoculars (Parametric) Mount NATO/Picatinny/Weaver compatible stuff on your binoculars (i. e. action cameras). Works with binoculars that have a 1/4" thread in the hinge. Print instructions Category: Camera…
These covers are sized at 47mm and 37.5mm I.D. to fit the large and small ends, respectively, of a set of vintage Bushnell binoculars where I had found the original plastic ones to have cracked due to age. The company logo is inscribed on…
Toy binoculars. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0,2 Infill: 0% Filament: Gembird PLA white Notes: I printed it in spiral mode with 3 bottom layers. Line width 0,6mm (0,4mm…
Objective and eyepiece covers for the Zeiss Victory Pocket 8x25 binoculars. Print instructions Use PETG at the 0.10mm Detail setting, rotate 45º so the lines are parallel to the lens axis.
Solar filter for binoculars with 42mm objective lenses. These work both on my Nikon Monarch HG 10x42 and Nikon Monarch 7 10x42 binoculars and will probably fit other similar sized binoculars. This solar filter fits nicely on the end of…
Astronomy right angle adapter for bigger binoculars (15x70 20x80) or similar types Componets: 2x Seagull Right Angle Finder or similar types 6x M3 screw Note: First, print the test ring to select the version according to the size of your…
Print in place lens cover for Vanguard ED 10x50 binoculars. Should probably work with other ~50mm binoculars. No flexible filament required. Print with PETG (tested with Prusa PETG) and use at least 5 perimeters to keep the hinge robust.…
I made this as I needed a very low-bulk case for some binoculars. This case fits my bushnell 10x42 binocs, similar to these: http://www.bushnell.com/Products/Binoculars/Trophy/Trophy-10x42/?sku=334210 . I've included a pic of my binocs in…
Adapter um ein Fernglas auf einem Fotostativ zu montieren. In die Sechseckige versenkung kommt eine ¼ Zoll Mutter.
Astronomy Red dot finder holder for bigger binoculars Celestron SkyMaster 15x70 or similrar types. Other componets: 2x M3 srcew 1x 3/8 Inch Female to 1/4 Inch Male Tripod Thread Reducer Adapter 1x Female 1/4 to Male 3/8 Convert Screw…
Perfect toy for any age! This model can be scaled! You can scale it down and use it as an accessory for a kid's toy or scale it up and use it for a kid to play with outdoors. This can also be a fun prop for any kind of performance! The…
Binocular Adaptor - iPhone 15 Pro Max - for Diamondback Vortex 10x32 Binoculars - Easiest to print this model as two seperate pieces and super-glue together. -Added a MERGED file which can be printed using supports, but I find it much…
Style One is the most accurate, but not all the small details can be seen on print. Style 2 is a mixed style, but the details show up better.
Protective shell replacements for front and rear optics of ZEISS 7x40 NVA German military binoculars. Easy to print, no support. Shell is much more compact and sleek comparing to originals, designed for more intense practical use. No…
Impression sans support. Film spécial : Baader Planetarium AstroSolar Filtre solaire pour l'observation solaire 20 x 29 cm https://www.amazon.fr/dp/B002SYD2EM
Zeiss Victory 10x25 binoculars are of high quality and light weight. So they are easy to carry in the pocket as such but the well engineered carrying case are the only available lens protection and it adds a lot of space and weight around…
Here's a small little accessory for Cliffjumper as a homage to its appearance in the latest comics - his pair of binoculars! To allow him to be able to hold it, the main option for this piece comes with the 5mm peg. But, we've included…
Print settings: 0.1mm layer (fast detail) 100% infill Printed with Prusa MK4, Input Shaper.
Binoculars for 3 3/4 inch (1:18 scale) action figure. Features handles so can be held in right or left hand. Based on Luke Skywalker's binoculars from STAR WARS (later titled Episode IV: A New Hope) (added handles and other slight…
Protective eyepiece caps for «Nikon Sportstar EX» binoculars The standard eyepiece caps included with the binoculars tend to fly off at the most inopportune moment, and they also have no fastening - you have to put them in your pocket or…
Case for whatever you want. Edit dimensions in Fusion 360 file. Originally designed as a case for small theater binoculars. With adjusted dimensions, can be used for glasses too. 2 versions are available: Binoculars-case - original design…
This is a replacement eyepiece cover for Nikon Aculon A211 10x50 Binoculars or any binoculars with caps that are 45.3mm Inner diameter. I printed two of these with Solutech flexible filament and they go on easily and stay in place. They…
This is my make for bonoculars holder for my HSW. I use the wall for storing my most used hunting equipment. I use this holder to hold my Swarovski 7x42 GA binoculars.
Protect your binoculars with our universal cover, which can be easily adjusted to different sizes. This cover is designed to fit all types of binoculars, regardless of brand or model. With the ability to resize in the program, you can…
My daugther recieved some used, small binoculars for a trip, but they didn't have a case to protect them in her backpack, so I decided to make this for her. I have no idea of the make or model, but the diameter for each of her binoculars…
Toy binoculars that are easy to print in vase mode for playing pretend! Fits a 2-year-olds eye separation. Print instructions Print with a thick perimeter, vase mode.
Lens cover for the back of the Binoculars. Fits ~44mm lens. Works with Vanguard ED 10x50
Lost lens cover for my Nikon Action 10x50 6.5 Binoculars so I printed one. Included Rhino file so people that have it can modify if needed. Printed out of PLA.
The rubber eye pieces of Bynolyt Sparrow WPR 8x42 Binoculars can be moved to increase the distance between the eyes and lenses, which is mainly useful to block light from the sides. However, these adjustable parts holding the rubber eye…
Bought vintage Leitz Trinovid binoculars, so I needed a case to carry it around on my nature walks. Just print it as is. PLA or PETG is okay. No support needed.
this is a little helper to adapt filter foils to mono- and binoculars inner diameter of the connection surface is 83.5mm i include the CAD files to change if you want or have to edit that The CAD is really quick and easy Probably this can…
A fun simple project i did for my son. A fun binocular for children! When you turn the black wheel (see images) the inside scopes will be extended. The models comes in 2 length, on pictures its full lenght, then there is a shorter verion.…
This model are binoculars. You used it to watch the Neighbor.
Solar filter for binoculars with a diameter of 72.5 mm
This is a high-fidelity 3D model of modern tactical binoculars, meticulously crafted in Plasticity 3D using a professional CAD/NURBS workflow. The result is a prop with exceptionally clean lines and realistic mechanical details, perfect…
This is a simple solar filter for my olympus 10x50 binoculars. You can modify source file if you want to fit this design on another one https://github.com/gshimansky/scad-models/tree/master/solar-filter Print Settings Printer brand: Anet…
Simply slide on the adapter onto your Fairphone, attach it to the binoculars and go! FreeCAD-File is provided as well and fully parametrized, so you can adapt measures if they are not perfectly fitting due to tolerances. I've added a demo…
Solar (or other type) filter holder for Nikon Monarch binoculars. Notes: USERS ARE RESPONSIBLE FOR USING AN APPROPRIATE TYPE OF FILTER. Cut filter to ⌀56mm approx. Fit between holder and binoculars is good with my 20+ year old Monarchs.…
This adapter can be used to connect an iPhone 15 in its case to binoculars exactly such that the normal lens interfaces the binoculars to take nice, zoomed pictures. The FreeCAD model is also provided so that it can be quickly adapted for…
I love Canon's IS 10x42 binoculars but there is one annoying flaw in their design. The diopter for matching focus on each optic is very easily moved. This necessitates a recalibration of the optic to get a sharply focused binocular view.…
made it for the idf soldires that use it to stop the sun from reflecting from the optics of the Binocular
Zwei Objektivdeckel für ein Canon 15x50 Fernglas die mit L und R gekennzeichnet sind um des verstauben der Linsen zu verhindern. Two lens caps for Canon 15x50 binoculars marked L and R to prevent the lenses from getting dusty.…
Designed for 65 ... 70 mm diameter (0.5 L multi-use bottles). Use scale function in your slicer for other diameters. Only the «Focus Knob» needs support. M5 screw and nut needed. I used black PETG, 0.3 mm layer height and 3 vertical shells.
Realme 7 Pro (and similar) binoculars adapter
Like many people right now, I have the option to work from home part time to reduce the number of people in the office. I got to see first hand what my wife has already been juggling for a week as we both work and try to maintain our…
This mount is to hold a phone for use with Astrohopper. It uses the grid system found on the Sunny Solar Binoculars and the Ember Space Binoculars, which can be found here: https://www.analogsky.co/sunny This requires the following extra…
I have a set of Ricoh/Pentax AD 8x25 binoculars, and I thought Fazal's model would fit. However, I wanted an eyelet so that I could attach the lenscap to the strap on my binocular to reduce the chance of losing it. I added the eyelet in…
Hi all I have few changes on this one and wanted to share I have made this one a little different and it seems to work great for me on my iphone with phone case and I have added magnet to have great grip and it holds the phone fantastic,…
Clone trooper macrobinoculars great for cosplay, comic cons and other events. Great for a first personal Star Wars project.
Oring for Bauer HD 8,5x50 binoculars made from TPU
1.25" M28.5x0.6 astronomy filter adapter to mount CPL or other color filters to oculars of binoculars. Sizing is set for easy snap inside of custom printable ocular shells Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro…
These rings/retainers allow a Baader solar film to be used with the Svbony SV47 8x42 binoculars Printed with: 15% infill PLA+ 0.4mm layer height no supports required You can just cut the Baader film accordingly and jam between the two…
I created the lens cap for Baigish 20x50 binoculars because the stock cap was too loose. I printed the model in Ataraxia Art Flexible PLA.
Hold your filters tightly and safely without tools or mods to your equipment. This filter holder for binoculars solidly grips via a sleeve, designed for TPU or other soft material. The solid rings clamp the sleeve between them and hold…
Uses heatset inserts, screws, and a magnet to hold the latch closed while storing
Objektivdeckel für einen 20 x 60 Feldstecher. Aufgrund des geringen Platzes im Köcher wurden die großen Deckel so konstruiert, daß sie innen passen. Ebenso ist der Durchmesser so gestaltet, daß die Deckel mit DC-Fix Velour beklebt werden.…
Nothing big. I just didn't want to have to track down an M3 nut and bolt. So I added a tab and hole from from tbuser's Pin Connectors V2 and mixed them in TinkerCAD. The picture is from before I realized that I broke the string hooks…
Astronomie-Taukappen um das Beschlagen der Gläser zu verhindern und um Streulicht zu blocken. Gedruckt auf einem Prusa MK4 mit Color Fab LW-PLA, mit einer Temperatur von 245°C und einem Extrusionsfaktor von 0,7. Das LW-PLA ist extra…
This piece lets you mount your binoculars to a tripod or any accessory with a 1/4 inch screw. It's designed for Nikon Monarch M7 binoculars but will probably fit others. The adapter can remain mounted as it fits into the bag. It allows…
Hold your filters tightly and safely with the option to quickly remove and replace the holder assembly based on your own needs. This filter holder for binoculars solidly grips via a sleeve, designed for TPU or other soft material. A solid…
Astronomie-Taukappen um das Beschlagen der Gläser zu verhindern und um Streulicht zu blocken. -------------------------------------------------------------------------------------------------------------- Astronomy dew caps to prevent…
I don't like carrying binoculars dangling around my neck and find bino harnesses too much a hassle. This 2-parts adapter allows to fit a capture clip mount to a pair of binos (mine are Kite Lynx HD+ 8×30), in order to secure them to a…
Eyecup Spacer for Swarovski Habicht 8x30 W (Binoculars) This spacer was specifically designed for the Swarovski Habicht 8x30 W binoculars. It is installed between the binocular body (eyepiece) and the rubber eyecup to noticeably increase…
This is an "iron" sight that helps you line up your binoculars to the target. It adds no bulk to the binoculars and still allows them to fold up. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution:…
This will be usable "as is" by very few people because it is intended for a specific binocular and also a tripod, but I hope it will serve as an idea and a starting point. That's why I've also packaged the Sketchup file so you can edit…
передняя крышка бинокля БПЦ 15*50
