34 models
This is an adapter that allows you to mount the Garmin Varia radar to a Trek Blendr seat mount. This requires the blendr mount with a compatible saddle, as well as the insert from a Garmin Varia mount included with the Varia. The Garmin…
This is a Garmin Varia saddle mount using the Bontrager Blendr saddle mount system. No hardware is needed in the model. Allen screws are needed to mount to the saddle, otherwise the Garmin mount is built in. It should be printed with…
Bontrager Blendr Universal Light Mount Model W574066 Support: YES Material: PETG, ASA etc.
Update 2019 Aug 15: I was contacted by nichenke who tried to fit this on the Wahoo Elemnt and it didn't fit. He tried to modify the original design from the F3D file but it didn't update right. I tried and got the same results. I've found…
An adapter to fit the Garmin edge 530 to the blendr double stem gopro mount.
So it turns out the Bontrager Blendr system Garmin low mount doesn't fit the longer (100x series) Edge cycling computers. Fixing these little problems is what 3D printers are best at, right..? This model is based on the original…
Added some strength to the original.
Slight modification of the blendr Duo by dar3kg . This is easier to print, and won't split when you try to fit it over the handlebars. I've also added material underneath the handlebars so the mounts won't slide apart. This fits my Trek…
I'm a big fan of the Bontrager Blendr system for mounting things to the compatible stems. You can mount a Garmin and a headlight onto your bike without a single rubber band or screw-on mount wrapped around your handlebars, resulting in a…
A mount for the Lezyne GPS units with the X-lock mounting which is compatible with the Bontrager Blendr mounts . Along the same lines as my Blendr mount for Wahoo thing, Bontrager only makes mounts that fit their own (non-GPS) computers,…
Busch & Müller IXON Core light mounting bracket for the Trek Bicycle / Bontager Blendr system. Uses the original IXON Core mounting clip from the standard bracket. Blendr sizes are same as GoPro mounts so this should be compatible with…
I found that the two nubs didn't hold the varia straight, so I adjusted it and added the tabs that are on the Garmin
Mount for Garmin Varia or compatible accessories to fit a Bontrager seat with the blendr fitting spacing Edit: Added .step and .3mf files because its what I would have wanted.
Designed for Trek Blendr system with duo mount adapter, leaving the second one for any light or cam. You need a standard Garmin (round) mount with the 2 bolts used on garmin stuff. Designed and tested with Garmin Edge 1040. Thanks for…
The Columbus V-900 (see note below) is a GPS datalogger that I've used in the past to track bike rides when I didn't want to run a proper bike computer. Normally I have it in a pocket but I wanted to have a holder so I could have it on my…
This is a Garmin Varia saddle mount using the Bontrager Blendr saddle mount system. No hardware is needed in the model. Allen screws are needed to mount to the saddle, otherwise the Garmin mount is built in. It should be printed with…
I wanted to use my light with the Blendr mount on my bike, but I couldn't find a stock solution that seemed suitable. The mount uses standard GoPro-style fittings, so it should be compatible with a wide range of accessories. I have this…
An adapter to fit the Garmin EDGE to the Bontrager Blendr system.
I needed a combined mount for my Wahoo Elemnt Bolt v2 and Bontrager ION 200 RT front light. I made use of the Blendr system from Bontrager to neatly combine and fit them to my stem. Some additional requirements to complete the build:…
Here are the files to print the Mono and Duo Base for the Trek RCS Pro Stem to attach accessories. Additionally, you will need the following hardware: 2x M5x18 Allen Bolts 2x M5 Nuts 1x M4x18 Countersunk Screw Make sure to tap the hole in…
This is remix of two model https://www.printables.com/model/857615-garmin-varia-bontrager-blendr-saddle-mount and https://www.printables.com/model/439489-magene-light-l508-saddle-bag-mount Magene mount 90 deg rotated and do'nt work…
PETG or similar is recommended. Attach your twist lock adapter with two screw and your are set.
Adapts seatpost mount that comes with Garmin Varia RTC71 Camera/radar to be used with Trek/Bontrager Blendr saddle mount. Uses the hardware from the original mount. Has a slot to tether to saddle rails and a hole for an m3 (preferably…
This mount works with Blendr capable saddles. It allows you to mount the Garmin Varia RTC 710 to the compatible Blendr mount using the parts that come with the Garmin Varia. This will not work with other version of the Varia that use the…
Some Bontrager saddles feature 2 M5 tapped holes, which is nice for mounting all sorts of things. Here is Bontrager Blendr Saddle Accessory Mount which uses these hardpoints. I have a Topeak saddle bag which I wanted to mount. Because I…
Motivation I wanted to a way to mount a GoPro to my (Trek) road bike handlebars, and I didn't like how other 3D-printed mounts that tried to mimic the Blendr system either required a lot of support material (or weak printing orientation)…
This mount bolts onto the fork crown, provided your fork has a bolt at the crown. Can be used with Trek's Blendr mounts, I use it to mount a light on my fork. Best to print with ASA or other UV resistant strong material, don't want it…
Garmin Blendr compatible mount lower + gopro mount, upper and a heavy duty that works better with PETG filament
Blendrahmen für einen 30x30 Spiegel für Kinderzimmer etc. Frame for a 30x30 mirror for children's rooms etc.
Remix of the excellent Blendr light mount by CinciJeff - functionally identical, remix just addresses some needs for supports. The back mount (for attaching to a GoPro or Blendr mount) has been slightly adjusted to no longer need…
This mount bolts onto the fork crown, provided your fork has a bolt at the crown. Can be used with Trek's Blendr mounts, I use it to mount a light on my fork. Best to print with ASA or other UV resistant strong material, don't want it…
