Counting matching models…
The idea is to create an easily printable object but with the characteristics of an airplane able to take flight at high speeds if fired from a blowgun. The blowgun can also be easily printed, or you can use an existing tool and print the…
The winged cone for blowgun darts is made for blowguns in caliber .625 (like the big bore from Cold Steel). The wings should force the dart in a little rotation in order to stabilize the flight and increase accuracy. You may need a bit…
This is the next iteration of a design I made 2 years ago, but was lost. Essentially, it is a blowgun designed to fit Nerf darts. There are 4 versions of this model; Smooth Shorty Nerf Blowgun Vase Mode - Has a smooth barrel that is half…
Use heat to insert the skewer and hold it in place.
Cold Steel .625 Big Bore Blowgun Grip with 5 Slot Picatinny Rail Materials Needed: 2 - M3 SHCS 2 - M3 Nuts Optional: Picatinny Mountable Laser for increased accuracy! Print Recommendations: Print with something strong if possible,…
I programmed this mouthpiece inspired by a mouthpiece I have. The big difference is: it is oval, not round. To complete your blowgun, you need a tube. I use aluminium tube with 10mm diameter (1mm wall). you get those in every hardware…
!!! WARNING !!! I printed it with a 0.8mm nozzle. With spiral mode setting with sequential printing. In this way, excellent quality and strength can be achieved without a seam. I can print 9 pieces sequentially on the mat. If you do not…
Just a simple modular Nerf Blowgun for N-strike Elite Foam Darts. Print: 1x Barrel Cap, 22mm*22mm*50mm, Less than 10g, Depending on how you print it you don't need supports. 1x End Piece, 50mm*50mm*65mm, Less than 10g, Don't need supports…
This rapid-fire blowgun features a loading mechanism and magazine that holds up to 6 slugs used as ammo. Just pull the tube end forward and then back to load the next slug and then fire away. It works best by building up pressure in your…
The idea behind this dart cup is to keep the dart more horizontal as it accelerates out for the gun. Normally, the dart tips toward one side, with the head rubbing the inside of the barrel on the way out. This should keep the dart…
A fast and easy to print 14 mm dart cone for 2.5 mm BBQ skewers. I printed it with a 0.5 mm nozzle in vase mode without bottom and top layer. Printing time on my Ender 3 is about 4 minutes. Have fun!
das ist mein erster Make, bei Problemen oder Fehlern schreibt mit bitte das ich was anpassen kann. ich empfehle das ganze in etwas festerem tpu zu drucken. die Konen haben alle eine 2,5mm Fassung für Standard 2,5mm Carbon Stangen, um mir…
This is a Nerf blowgun I designed myself. I designed it to fit all .50 inch nerf darts. Some nerf darts need to be rolled in your hand with a bit of pressure to make it less stiff to fit down the barrel. I used a pencil/pen to push the…
A little wing-addon for the darts of a blowgun, caliber .625 (e.g. Big Bore made from Cold Steel) In theory the little wings force the dart in a rotation which stabilize the flight. TPU is recommend because of flexibility and adhesion on…
The winged cone for blowgun darts is made for blowguns in caliber .625 (like the big bore from Cold Steel). The wings should force the dart in a little rotation in order to stabilize the flight and increase accuracy. You may need a bit…
Wanted to experiment with 3D printing a high airflow blowgun using “vase” mode. Using PrusaSlicer with the settings below allows a “mix-mode” vase printing, whereby the lower section is printed normally and the upper section is printed in…
This is a complete rewrite of the model for a dartcone. You'll need the BOSL2 library and obviously OpenSCAD. To the parameters: caliber the caliber (inner diameter) of your blowgun in mm shaft_diameter the diameter of the needle you plan…
Blowgun darts for E Darts in cal. 0.40 and 0.625 The darts are with a thread fitting the standard (european) darts tips Use TPU for printing. PLA will break on impact. Best for game mode "Cricket" otherwise its likely that you hit and…
AssemblyAid: -For dart cups with a neck diameter of 5mm -For dart shafts with a diameter of 2,5mm Notice: With the assembly aid, the shafts can be glued straight into the cap with superglue! Dart Cup Dimension(mm): Cone_Diameter: 16…
I had some extra aluminum barrels lying around and figured making some blowguns would be neat. And why design a new attachment mechanism when a brilliant one already exists? You will need a 016 o-ring, or a rubber band to place between…
This modal was designed to be printed without supports. Print standing upright. Dart cone may need to be sanded for more precise fit.
I made this model for blunt headed darts to fit a .625 caliber cold steel blowgun for when you want to shoot something but don't want a hole in it. The dart fits well inside the blowgun, it snaps into the anti-inhalation device with a…
Lost my quiver guard for my big bore .625 blowgun, so I made a replacement that entirely covers the "razor blade" type dart. Printed in Petg, mine was quite snug. If fitment isn't sufficient, I recommend adjusting the size when slicing…
I'm posting rails and attachments for my son's Cold Steel Big Bore blowgun. The first piece is a double-sided NATO Accessory Rail ( STANAG 4694 ). The rails were created using an OpenJSCAD port of the OpenSCAD code from…
Easy-to-print blowgun for standard 13 mm Nerf Elite foam darts. Shoots 50+ feet. Print the long barrel for highest velocity or the short barrel for a more compact build (~10.5" vs ~7" total build length). The barrel is designed to be…
I've seen some blowgunners use grips on their blowguns. So I created my own that follows the rules of the german DSB (Sportordnung Blasrohr). The main parameter is the outer diameter of the tube - obviously :-) The axis is designed for a…
This is a small foam dart blaster that has two screw-on attachments allowing it to act as a breath powered blow gun and a bellow powered blaster. There are multiple barrel diameters allowing you some leeway in tolerances for dart fit. The…
Update: 20-11-2021 Problem that the stucked darts, after entering the barrel! Drill the first 80-100 mm of the barrel to 14 mm and the darts have enough speed and guidance to enter the tube/barrel whitout problems! Canged version from the…
It is recommended to heat the nail before putting it into the TOP, be careful not to heat too much so that the plastic in the area does not melt.
Inspired by the Blowgun Plane Aereo by Stefano Rocca I saw a few complaints about lack of flying power. I took to TinkerCad to design a new version which hopefully solves the problems raised. Uses and Aerofoil wing and attack angle to…
Made myself some blowguns, now I need some darts, with this and some BBQ sticks, I have more than enough. Since my blowguns and sticks are quite random, and different filaments are not that easy to match precisely, I made all the variants…
inspired by the spiral fidget toy, my brain immediately went to 'blowgun'. i might tweak it later to function better but im sure one of you out there is a total pro at blowgun stuff. so print it out & play with it & give me your input i…
Generic Disclaimer: Most aluminium tubes are not sized very precisely (at least one of mine were), so the models here have been adapted to fit the tubes that I bought. You will probably need to resize the model (for the 3mf-files) or…
This is a mouthpiece for a blowgun. It is designed for a 12mm pipe (inner diameter: 10mm) so I can shoot Bang Snaps with it. It should be printed with supports. Organic supports have worked very well for me.
This adapter screws into a cheap Harbor Freight blowgun (and probably others) and fits inside the Intex air ring hole so that you can use an air compressor to fill up the ring. If you have a different size plug to fill or a different size…
Protects the end of you blowgun from being bent or nicked. Suitable for 22/16 tubes (22 mm OD, 16 mm ID), e.g. the Cold Steel .625 Big Bore.
Something to hold you arrows during practice or competitions. Currently only suitable for 16mm and 14mm darts. To create quivers for 12mm darts, scale X and Y to 90%, for 10mm to 80% (assuming your darts are all the same length,…
I didn't have the same style of blowgun as the source object so I designed my own parametric version. I found that the 30 degree version works better with a longer nozzle (the needle style nozzle in the photos) and the 45 degree version…
Simple blowgun that can be screwed together. The large pieces have their own supports do they don't move while printing.
this is a tpu mouth piece made for 16mm OD tube for a diy blowgun
I don't have a 3D printer myself! If you print this, please post a 'Make' with a photo. I'd love to see how it turned out!" Update: Version 2 is the same except for the bottom which is now easier to print. Print this out for a .625/16mm…
This is a simple barrel-mounted holder for blowgun nail darts. It clips onto a 16mm diameter tube and holds 8 darts made from 3mm nails . The design keeps the darts secure so they don’t rattle or fall out, while still allowing quick…
I got the Tim Wells blowgun as a gift, but I noticed two things: one, I had an abundance of empty medication bottles (deranged) and I had a dearth of blowgun dart holders of any variety. The solution seemed obvious.
This is a dragon head that is made to fit on a 1/2 inch PVC pipe. This is a remix off of MartialDesign's creation. I changed it so that it was shorter and so that it would fit correctly. I would recommend printing it upright with supports…
Generic Disclaimer: Most aluminium tubes are not sized very precisely (at least one of mine were), so the models here have been adapted to fit the tubes that I bought. You will probably need to resize the model (for the 3mf-files) or…
Because the basic connection was broken, I thought about making my own design
Tic Tac blowgun with 20ft range. No moving parts, so super easy print WARNINGS: DO NOT INHALE WHILE USING. DO NOT AIM AT EYES OR FACE pls like & download so i can get core one
A fun blow gun that is easy to print I printed it in pla silk gold
A simple top-loading blowgun of ½” PVC works well once a mini marshmallow reaches the chamber, but the ammunition tends to jam up in the loading tube. My 3D-printed loading tube resolves this with a tapered inner diameter that gets larger…
I was watching a Mike Shake video, and he had the idea of powering a blowgun with one of these pneumatic plungers. https://www.amazon.com/dp/B0DPKJC58B is the plunger I used, though I think the internals are mostly the same across most of…
What is this? This model fits the threads of a Campbell Hausfeld blowgun (and maybe other brands?). It adapts the blowgun to the Walmart Aquarium tubing with a 4mm ID . The model includes wingnuts for tightening the nozzle down with ease.…
This is a model of an already existing object. I could not find it anywhere on the internet, so I made my own and after many years spent on my hard drive I finally upload it here. originally the dart had a long tip that would stick to…
print with flex, use bamboo skewer for a dart, piece of pipe with inner diameter 17-18mm. Or scale the dart according to your pipe. Tisknout s Flexu, na šipky použít bambusovou špejli, k tomu kousek trubky s vnitřním průměrem 17-18mm.…
Leather wrap for blowguns, intended for a laser cutter. Add engravings to your own liking. Meant for a blowgun with 20mm OD and around 4mm thick leather. Cutting parameter on my 10W diode laser: 400 mm/s, 90% power, 2 passes. I would have…
holds 36 darts of up to 60mm height and 14mm skirt width
blowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunblowgunb…
Generic Disclaimer: Most aluminium tubes are not sized very precisely (at least one of mine were), so the models here have been adapted to fit the tubes that I bought. You will probably need to resize the model (for the 3mf-files) or…
really nice and easy to print parts fits really good. The mouthpiece was [tpu] but its your pick what kind of plastic you want. Made for pvc pipe
Habe das Modell passend für mein Blasrohr mit einem Innendurchmesser von 12mm skaliert.
Habe das Modell passend für mein Blasrohr mit einem Innendurchmesser von 12mm skaliert. Ebenfalls wurde ein 4mm Loch eingefügt um eine 3,9x55mm Schnellbauschraube als Spitze von hinten durch das Projektil zu drehen, ein sehr effektiver…
Habe das Modell passend für mein Blasrohr mit einem Innendurchmesser von 14mm skaliert. Ebenfalls wurde ein 4mm Loch eingefügt um eine 3,9x55mm Schnellbauschraube als Spitze von hinten durch das Projektil zu drehen, ein sehr effektiver…
Using the link below you can buy the PVC pipe that this is designed for and can print the model then attach it to the PVC pipe and I will later make a dart you can put in it as ammo…
Habe das Modell passend für mein Blasrohr mit einem Innendurchmesser von 14mm skaliert.
I could not find any moddles so i made my own. works good. may need to heet up the metal end and push it into the nock. use tpu filament
Cold Steel Big Bore – MOLLE Mount I designed this custom 3D printed MOLLE mount for my Cold Steel Big Bore blowgun. The blowgun separates into two sections, making it easier to transport. This holder keeps both sections together in a…
This is a mouthpiece for a blowgun. It is designed for a 12mm pipe (inner diameter: 10mm) so I can shoot Bang Snaps with it. It should be printed with supports. Organic supports have worked very well for me.
Made myself some blowguns, now I need some darts, with this and some BBQ sticks, I have more than enough. Since my blowguns and sticks are quite random, and different filaments are not that easy to match precisely, I made all the variants…
This is a simple barrel-mounted holder for blowgun nail darts. It clips onto a 16mm diameter tube and holds 8 darts made from 3mm nails . The design keeps the darts secure so they don’t rattle or fall out, while still allowing quick…
Using the link below you can buy the PVC pipe that this is designed for and can print the model then attach it to the PVC pipe and I will later make a dart you can put in it as ammo…
Using the link below you can buy the PVC pipe that this is designed for and can print the model then attach it to the PVC pipe and I will later make a dart you can put in it as ammo…
I don't have a 3D printer myself! If you print this, please post a 'Make' with a photo. I'd love to see how it turned out!" Update: Version 2 is the same except for the bottom which is now easier to print. Print this out for a .625/16mm…
I don't have a 3D printer myself! If you print this, please post a 'Make' with a photo. I'd love to see how it turned out!" Update: Version 2 is the same except for the bottom which is now easier to print. Print this out for a .625/16mm…
This is a sectional modular nerf blowgun. It shoots Nerf darts quite well. There are 5 required pieces to print, that all interface with each other. If you want the blowgun to be longer, you can print more bullet chamber pieces. The…
![Blowgun setup[pvc]](https://media.printables.com/media/prints/3fa82477-b6f5-42ed-87a5-d4d96aeb5e87/images/13718359_4895d310-c485-447e-a901-65a4f3a3b8e8_462c1f77-1f77-47a9-8c6d-593a97ac902f/20260901_174323.jpg)
