Counting matching models…
Top Bar Punk Bracelets : For Common 1 Inch Top Bars Yea the only way to get these around the bar would be to use flex + Look at it can you imagine landing on that spiked one. Soft Flex only. Resize as needed.
♾ Mix. Match. Click. Chic. ♾ Meet Linklet — the bracelet that loves to play dress-up as much as you do. These sturdy links are designed to snap together in endless ways and will not come apart unless you want them to. Go elegant with a…
Please watch this short video: Fast printed bracelets from PLA, no supports. This is a free version of my jewelry program “Amazing STL Creator 13: Jewelry” Link to download the program…
3MF included to easily resize hole as needed, and/or rotate 90 degrees depending on whether you want to run it the long way or short way. Picture shows both the long way and short way in use on different bracelets.
3MF included to easily resize hole as needed. Minimal supports needed for the lens. I was able to print it as a singular piece using multi-extruders.
3MF included to easily resize hole as needed. Although it can be painted, I was able to print fully using multiple extruders instead.
3MF included to easily resize hole as needed. I was able to print it as a singular piece using multiple extruders. You could also paint it if unable to do so.
3MF included to easily resize hole as needed. I personally needed to use a brim in order to keep it from scattering.
If you like my project, give me 👍, it will make it easier to reach others 🙂
Brazaletes PS 30º Aniversario. Imprimir en TPU, activar "Imprimir paredes finas" en Cura, no necesita soportes. (testeado). PS 30th Anniversary Bracelets. Print in TPU, activate "Print thin walls" in Cura, does not need supports.…
Holder for rings and bracelets. The design also has provisions for magnets 6mm x 2mm.
3mm hole. You can easily adapt it to your necessities
For example to use with cord create with the great Spin Master Cool Maker KumiCreator or your own corded bracelets and necklaces cord. Put the cap over the cord, and use a lighter to melt the thread ends together. Pull back the blob into…
A set of 3 fun, flexible bracelets to print from flexible/TPU filament. Use flexible filament ONLY! The bracelets come out very stretchy, so they are a one-size-fits-all. Under the files tab for each of the 3 designs, there are two…
Top Bar Punk Bracelets : For Common 1 Inch Top Bars Yea the only way to get these around the bar would be to use flex + Look at it can you imagine landing on that spiked one. Soft Flex only. Resize as needed.
A simple, adjustable jig designed to aid in the making of paracord bracelets and projects. Length can be adjusted by use of the screw knob piece in the middle. It requires six (6) M4x20 screws: two (2) to attach each end piece and two (2)…
Simple recreation of N's bracelets for cosplay purposes. The model may have some broken faces etc. however it's still very easy to setup for an easy print
This set of cards for Celtic weaving is designed for creating decorative belts, straps, bands, or bracelets. The cards can be used with finer materials such as wool, cotton, or yarn, as well as thicker cords and strings. The result is…
♾ Mix. Match. Click. Chic. ♾ Meet Linklet — the bracelet that loves to play dress-up as much as you do. This is a spooky Halloween set for the Linklet modular bracelet system. Featuring: 🎃 Pumpkin 🦇 Bat's wing 🕸 Spider's web 🧙 Witch's hat…
Another model of my jewelry box - now for bracelets (especially circular bracelets) and so on. It is 25 x 16 x 2 cm, it is stackable with my special parts (https://www.prusaprinters.org/cs/prints/135871-zarazky-ke-krabickam-na-sperky).…
A nature-inspired jewelry stand 🌿 designed as a functional decorative accent for everyday use. The organic, branch-like form provides an elegant way to organize rings, bracelets, and necklaces 💍✨ Its sculptural shape keeps jewelry clearly…
Coupled with your own bracelet this dragon head can act as nice addition to your rainbow loom crafts. Print Tips: No Brim or Brim, both work Added a modifier around the head to include 6 perimeters to help strengthen the clasp. Used…
The design of the stand, inspired by organic forms of nature 🌳, is more than just a decoration – it is a private gallery for your timepiece 🏛. Thanks to its well-thought-out construction, the watch rests in a position that perfectly…
Print the box in spiral vase mode. Print the hook. Glue the hook to the recess at the back of the box. Hang it on a coat hook.
♾ Mix. Match. Click. Chic. ♾ Meet Linklet — the bracelet that loves to play dress-up as much as you do. These sturdy links are designed to snap together in endless ways and will not come apart unless you want them to. Go elegant with a…
This model Has 3 different versions: Just Necklace Holder Necklace/bracelet holder just bracelet holder They all hold rings, none of them hold earrings!
Superheroes - Wonder Woman Bracelets of Submission (Gal Gadot) 3D printable model.
Superheroes - Wonder Woman Bracelets of Submission (Gal Gadot) 3D printable model.
How to form the bracelet How to use this system Measure the wrist of the person you are trying to build a bracelet for. This measurement needs to be in millimeters. Using the chart below, determine which form you will need. Select a form…
Adjustable Bracelets. Made with TPU, printed at 100% infill. Utilizing an easy snap connection, no hardware is needed. I have included the STEP file, it is not a great CAD design, still learning.
Stitched neck choker, bracelets, and armbands. Works great for Sally from The Nightmare Before Christmas, Frankenstein's monster, or Monster High character. The necklace and bracelets are meant to be used with a clasp and chain. The…
A small tray designed to hold beads while working on bracelet designs. The outer rim allows you to arrange your selected beads and get a sense of what the final product will look like without needing to string them. The inner divot works…
With this OpenSCAD code you can print ALL OF THE PENTAGONS that can tile, or tessellate, the plane. Fifteen families of pentagons, including the last possible type, discovered by mathematicians in 2015. What can you MAKE with this design,…
Bracelets based on some of our solar system's bodies. Links to original models, for reference Moon: http://www.thingiverse.com/thing:14011 Earth: http://www.thingiverse.com/thing:14070 Mars: http://www.thingiverse.com/thing:26311 Europa:…
Update 2/12/2023 : I added some links for quarters, dimes & nickels. The biggest problem I have with these is sizing them correctly for the coins. If you make it too loose, they can slip out. I you make it too tight, they are too…
Small box designed to host Paracord bracelets, but can easily be used for a range of other applications. It must be double printed, so you have a top-bottom match. I used a stainless steel soldering rod as a pin for the hinge, but a piece…
Hello World! :) We have all looked at something and thought "That looks nice" before, and then thought "But it doesn't do anything" We also might have run into a situation in which a phone holder might have been useful. For reading,…
stávek na tkaní módních vzorovaných náramků a jiných doplňků z korálků. průměr tyče 26mm - standardní dřevěná násada na koště strike for weaving fashionable patterned bracelets and other beaded accessories. rod diameter 26mm - standard…
Howdy, wonderful people! That Fidget Skull was a fascinating thing to explore, but it made a terrible bracelet! These much more purpose-designed things work far better, even if they feature fewer skulls. Now, the first thing you'll notice…
Après le présentoir à boucles d'oreilles, voici celui pour les colliers et les bracelets. Imprimé ici en PLA.
Adjusted to use 2x4mm threaded rod length at your discretion used counter nut to hold in place
ENGLISH I've always had a passion for Paracord and some time ago I met BlackSquirrel from whom I buy the materials to make my creations, they have a great assortment and well done guides and tutorials on how to make bracelets and more . I…
This printable bracelet stand is the perfect accessory for jewelry enthusiasts. Easy to assemble with 3D printing, it offers a practical solution for storing and displaying your handmade bracelets. It's an elegant and functional jewelry…
The rock charm compatible with Pandora charm bracelets and necklaces.
Printed with PLA and ironing on the top. 100% infill because it's so small so the walls will be 100% infill anyways.
Stand for watches, bracelets, rings and other things. It is printed without supports.
Lighter and slimmer then before with a new improved locking mechanism, prints on average in 30 minutes and uses less then 8 grams of filament. Strong even with silk and easy to print. Print settings - 0.42 wall thickness 0.15% gyroid…
3D MODEL DESCRIPTION 9 Lengths included per design Painted and single colour versions included 3mf files and stl files included New design, easy to print completely new unicorn, links and lock. Optimised for silk and strength so print in…
This is a braiding for easy doing Laces, Headbands & Bracelets. Simply us 7 Strings (eg wool) and knot them together on one side. Then push the knot through the hole in the star. Clamp the 7 Strings into the guides on the edges and leave…
Glue the magnets and the end of the knots into place. Print at 0.2mm height. 3 different gap sizes to fit the string knot.
Simple Jewelry stand made from 2 intersecting pieces. 15% infill recommended
Try it out. I want to start a small business and making this, I can learn more and more with this...:)
a) PRINTABLES.COM OPTION A collection of soundwave design bracelets WAVEO is based on the specific shape of a soundwave from a voice recording, and can serve as an effective reminder or a memory holder, similar as a tattoo. Bracelets are…
Some bead kits I purchased came with short beading needles which are helpful for smaller beads, but they weren't the best for making beaded jewelry with my Friendship Bracelet Making Tools, so I designed this! Works great with pony beads!…
This is a clamp used to secure the ends when braiding a friendship bracelet. Assembly Instructions 1. Screw the Clamping Screw into the Top Plate. 2. Slide the Clamping Block onto the tip of the Clamping Screw. 3.Insert M4 nuts into the…
With this rack, you could choose your lenght between 15 and 30 cm. Use the screw and nut to keep top and botton parts tights. Put grip pads under the feets. Add binder clips for keeping the threads in place. PLA 0.2 layer height || .15…
I recommend making these with silk PLA filament for extra shine ✨ Print settings: 0.2mm layer height 0.4mm nozzle Compatible with my other models: Craft Tweezers Beedle Friendship Bracelet Making Tool ✨If you like what I do✨ Follow me for…
