Counting matching models…
I printed it with a layer height of 0.2mm with 10% infill. It could be done without infill, but it has not been tried yet. Enjoy it
Print approx. €5.38–€6.58 excl. taxPreliminary estimate for one variant
Tested in the real world by 2 amazing kids, this will be the most fun you will ever have! Time: Takes about 15-30 mins depending on your print speed Print settings: 0.2mm layer height 0.4mm nozzle Infill: Grid/Gyroid at 80-100% I printed…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Printed in Eryone TPU which has a 95A Shore hardness. It should work even better with a slightly softer TPU. Printed without supports.
Problem: BMB Universal lid pops off. I like Northern Brewer's Big Mouth Bubbler but they got rid of the screw-on lid, and replaced it with a press-on cap that pops off unless the lid and bottle are super dry, and even then it can pop-off.…
The part is marked as WIP since I need to fix the face plate on the back. You can already use the parts if you install the original Proxxon plate on the back of the lower axis. The original files for the lower axis are off center on my…
This vase features a unique embossed bubble texture that wraps around the entire surface. The design is specifically engineered to create an incredible play of light and shadow: the organic hemispheres capture reflections smoothly, making…
Turn any standard mason jar into a bubbler for a quick and easy airlock for fermenters. To be used with 5/8 OD tubing. Printed with PLA at 0.3mm layer height. Cheers!
i did 3 walls 95% cubic infill slicer says its around 100g of petg
I like to brew my own non-gaseous drinks, specifically mead. This generates a LOT of CO2 gases, and you can't let it ferment to open-air either. This is where you need a bubbler to act as a gaseous valve. In this particular instance, just…
My niece drew this bubble tea thing, and I brought it into the 3D world using thinkercad and my basic and still learning sculping skills.
Standard two wheels just didn't work for me. I also have chicco baby hug and change its wheels for bigger and smoother so I had spare rotary wheels. I design new legs with wider range of height and holes suiteble for baby hug wheels. I…
Bubble counter for monitoring fermentation process. I cracked open one of these (IR Optocoupler LM393) to make them wider. Also you need to have some kind of bubble cap (eg. this one ) Afterwards just place it in this rig connect to…
I didn't have a screw driver long enough to attempt to use the same fastener that's on the shifter already, but it is a good enough friction fit where the concern for the knob coming off is minimal. Slight sanding needed to allow for a…
The internal holding part of the explosive coil
Hello, this machine works with a gear dc motor, i used this one: https://www.amazon.de/gp/product/B0863R5R9F/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 Furthermore you will need a battery, a radialfan and switch. For the soapy water…
My niece drew this bubble tea thing, and I brought it into the 3D world using thinkercad and my basic and still learning sculping skills.
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
This organizer holds a full 10-count refill pack and is designed to sit neatly next to your Fresh Brush wand and stand. The 40mm wide opening allows you to easily grab a single pad directly with the wand — no more fumbling in drawers or…
I didn't have a screw driver long enough to attempt to use the same fastener that's on the shifter already, but it is a good enough friction fit where the concern for the knob coming off is minimal. Slight sanding needed to allow for a…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Put in a roll of toilet paper without the cardboard in the center. There are a couple of designs available, the lid snaps firmly into each of de designs. I was inspired by this design:…
Rafts, supports - No Infill - 15% Walls - 0.4 mm Top surface, infill - 0.3 mm Height - 0.2 mm
Ein verspieltes, abstraktes Wandrelief, das aus verschiedenen organischen Halbkugeln und fließenden Vertiefungen besteht. Ein modernes Kunstwerk, das durch seine plastische Form besticht. Stellen Sie Ihr Modell vor Dieses Design…
After I posted the Triple Threat Razor Holder, my wife immediately requested something to get her and our daughter's loofahs off the floor. I didn't want to waste a suction cup on just a hook, so I designed this combo shelf that holds…
You will find a Zip file with all the parts for each model, and I have also attached an assembly so you can see a 3D representation of each figure.
Tested in the real world by 2 amazing kids, this will be the most fun you will ever have! Time: Takes about 15-30 mins depending on your print speed Print settings: 0.2mm layer height 0.4mm nozzle Infill: Grid/Gyroid at 80-100% I printed…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
This is a mold to cast a adapter for the Storz & Bickel Might+ and Crafty+ vaporizer to combine it with a bubbler that has a 16mm glass tube. This Adapter MUST be casted from high temperature two component silicone! Don't use standard 2k…
This model imitates the feeling of bubble wrap! It might be a little stiff for some printers at the start, but with a bit of force it will go. Have fun!
The very small holes at the top and bottom are used to secure the candle wick. The two halves of the mold should be held together with a strap. Fill with melted wax up to the edge. Wait several hours for the wax to harden before opening.
Please print the main housing out of TPU and the springs in either PETG or ABS. Simply print the housing, remove the support and pop the 4 springs and bubble levels in. Then remove the 2 screws at the back of the drill and install the…
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store A stand to hold two empty Oh Bubbles! AllFizz…
Freddy Fazbear - Special Bubble Wrap Texture Edition Unikátní model postavičky Freddyho s texturou, která připomíná prasklou bublinkovou fólii . Tento vzor vytváří úžasný vizuální efekt, který skvěle maskuje tiskové vrstvy a dává modelu…
Proč si stáhnout právě tento model? Unikátní vizuální efekt: Textura bublinek vytváří při tisku zajímavé odlesky a dává figurce hloubku, kterou běžné hladké modely nemají. Maskování vrstev: Díky členitému povrchu jsou tiskové vrstvy téměř…
I have enhanced this model with a unique "bubble wrap" texture that looks absolutely stunning with Silk PLA or dual-color filaments. The bubbles create amazing light reflections and help hide layer lines. My Proven Print Settings: Nozzle:…
Description Elevate your sink with this modern, organic soap dispenser. Designed in Shapr3D, this model features a unique bulbous "teardrop" silhouette that provides a comfortable grip and a sophisticated look for both kitchens and…
For alternative designs, check my other models: https://www.printables.com/@SergeNader_501750/collections/3281639
That's one big piece of gum! A modified version of Phys' All-In-One USB dongle that uses an Adafruit CH334F Mini 4-Port USB hub breakout instead of the original disassembled USB hub the project originally calls for, making it easier to…
This boho-style table lamp features a cylindrical shade covered in an intricate honeycomb bubble texture — a repeating pattern of raised hexagonal cells and circular dots that diffuses light beautifully, casting a warm, patterned glow…
Silhouette of Bubble from The Amazing Digital Circus. To be hung on the wall as art. I use double sided tape to mount, and it works well. Uses less than 20g of filament and is about 1.25 mm thick. You can scale it's thickness up, if you'd…
LOVE & MOM COLLECTION: "LOVEYOUMOM" BUBBLE KEYCHAIN Celebrate Mom with a gift as sweet as she is! This "LoveyouMom" Keychain is the flagship piece of our new Love You Mom Collection , designed specifically for Mother's Day. It features a…
"BEST MOM" BUBBLE KEYCHAIN Celebrate the wonderful mothers in your life with a sweet and modern keepsake! This "Best Mom" Bubble Keychain is a key addition to our Love & Mom Collection . It features a modern "puffy" or bubble-letter…
A bubble dot 3D printed lampshade with a soft, rounded texture that diffuses light into a warm ambient glow, printed in support-free vase mode for a seamless finish. The shade sits on a compact faceted base with flat geometric faces.…
A think bubble for Dekoration text you can ad your self or yust leave it like that
🛠 Materials & Hardware: 🧵 Silk PLA Filament (Pink) ➡ [ https://amzn.to/42ui233 ] 🔑 Keyring Split Rings (25mm) ➡ [ https://amzn.to/41RZ3zh ] "LOVE YOU" BUBBLE KEYCHAIN Spread affection and carry a little love with you everywhere! This…
ZWO AM3N Bubble Level Mount. Uses a 2.4" (60mm) bubble level from Amazon. https://www.amazon.com/dp/B097YVJ9P8
Tired of your kids coming in for the umpteenth time, having tripped over and spilled the entire container of soap bubble mixture? Mount it in this contraption instead! Quite sturdy and kid-tested, but also comes with absolutely no…
I have a basic one nozzle printer but am able to do color swapping with this file to achieve a nice raised text effect. The font used is SFNSDisplay-Regular.otf
Print in place bubble treasure chest for fish tank. No supports needed but print 100% infill in dense material so it won’t float. Made for 6mm outer diameter air tubing and requires an air valve to adjust flow. The airflow should be as…
Little pen pot i printed upside down to give it that nice finish to the top. I didnt include any supports. I love the macaron colours for this but obviously any colours would be nice.
Dual Axis bubble level To re-use the bubble levels that come with Ubiquiti gear
It's for straws of 22cm in length and 12 mm in diameter. Or fit your chopsticks. Print Settings: Printed 100% for best hinge strength. Post Processing: Scrape off the top layer on the hinges if they get in the way 22 公分長，12 毫米直徑珍奶吸管收納盒。…
Allows Bodyarmor Alkaline Sport Water to be used as bubbler. See original for more details. Modified to have Male 40mm NATO threads for the output allowing easier use with standard gas mask hoses.
Bubble themed soap dish, prints in two separate parts. No supports or brim necessary. Highly suggest using filament meant for use with water, or coating the prints with a waterproof sealant. Category: Bathroom
Simple holder to keep 6 mailers nearby Uses 10x3mm Magnets, Press fits perfectly on a P1s
Whenever my children play with soap bubbles, invariably they drop the soap and start crying. I looked for some available models and found a suggestion, but I was not convinced so I created my own. The model is simple and fits into the…
This is an improved version of the original heliochronometer sundial base design. It allows one to level the base and make true north adjustments without any additional hardware. It is also compatible with the original heliochronometer…
Gridfinity 1X3X3 filled box modified to hold the Fixit Sticks Scope Jack and Optics Bubble Set. Been working on the bench top tool kit and wanted to have these items as part of plan.
This airstone is easily printable and can be adjusted to your needs Printing: In order to be safe in your fishtank, i recommend using PLA. Print all parts in the given orientation. No support needed. Layer hight of 0.2 (or finer)…
This model is compatible with the lego system.
Hello, this machine works with a gear dc motor, i used this one: https://www.amazon.de/gp/product/B0863R5R9F/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 Furthermore you will need a battery, a radialfan and switch. For the soapy water…
Allows Bodyarmor Alkaline Sport Water to be used as bubbler. Includes two parts to have adjustable stem, recommend hot gluing at needed length. See original for more details. Modified to have Male 40mm NATO threads for the output allowing…
I had an old icebox. It was in good condition, but I lost the drain cap. And the cap that connects to the air bubbler I was using for fishing was broken. I made new caps to replace them. My icebox is the same brand as this one and I think…
Hello there, this is a quick-made bubble set for your children. Works great with original soap for bubbles. PLA works great for me.
A set of 6 differently shaped bubble wands. They print in two halves and you simply glue/gloop them together. A BIG thanks to Jon-Michael for designing these for PME- you can find his work here https://linktr.ee/jonmichael3d Filament…
Can be used as a bath toy. OpenScad file included. You can adjust bubles size, and bubbling speed by changing top, and bottom holes diameters. bulbulator, bullbulator, bullbullator boolbullator, bubbler, bubbling device
Mini Bubble Level for Keychain This compact mini bubble level, designed to attach to a keychain, is perfect for quick adjustments on the go. It features two bubbles (horizontal and vertical) sourced from Ubiquiti equipment, allowing you…
My kids have spilled so many soap bubbles in the past I desided to draw this up to save some dollors. Fit is tight, depending on tolerance or your printer. Printed with 0.4 nozzle and 0.2mm layers.
A miniature of bubble milk tea. It has no particular usage. The “Tea” (MMU parts) and the “Cup” (Vase parts) are separated. The MMU parts are mean to be printed together with MMU or other multi-material printing techniques. The Vase parts…
This is a simple bubble barrier to minimize bubble splashing at water surface for sponge filter with vertical lift tube. Print with 25% infill or less to ensure part will float. Slide airline tubing through center hole to keep part…
The original upload by bowiesjustaknife was a .step file of the base including a representation of the the bubble level, so no good for slicing/printing with Cura etc, UPDATE: bowiesjustaknife has finally uploaded a proper STL, minus the…
20,30,40,50mm stand for your skimmer (OD 125mm and OD 165mm)
Allows a 32mm diameter bubble level to be mounted on a Dwarf 2 tripod. This makes it easy to ensure that the Dwarf is level before shooting. The level I used was from Amazon - sourcing map 4pcs Round Bubble Level 32x12mm Mini Circular…
This model is compatible with the lego system.
Voronoi Bubble wand. Use pencil as handle. Offset handle so you can dip it easier. Made with Inkacape, blender and tinkercad.
Post / stand for storing plastic take away cup lids. Printed in PLA. Size 245 h x 125w x 125d. 10% infill - 50% for area where post connects to base. Note : Not suitable for Prusa Mini (too big).
I saw the image somewhere a while back online. I grabbed a screenshot of it and held on to it forever before deciding to redraw it in Fusion. I think it turned out pretty darn good. I put it up on Printables if you'd like to print it…
No need for a Christmas tree to enjoy your favorite bubble light! This bubble light holder is perfect for decorating your desk, mantle, or add a vintage touch to your Christmas village! Currently there are 2 options, an E10 or E12…
Bring a modern, playful vibe to your home or garden with this stylish Bubble Planter Pot . Perfect for small plants, succulents, or herbs, this design combines functionality with a fun aesthetic. Easy to print: No supports required,…
Backstory I was experimenting with a new idea to construct rolling paths for dice towers. And I found a nice way to use spheres to easily generate rolling paths with bumpers. Therefore I made a model based on this concept and added…
