Counting matching models…
Good morning, Welcome to my profile, full of models and miniatures :-) I have Pokemon Bulbasaur for you, just for fun. Very nice characters. It is suitable for coloring. My kids absolutely love it :-). Important: If by chance the…
Motivation I found this nice model of "Helferlein / Little Helper" by DIY Wizard (based on the popular model "Dummy 13"). To illuminate the bulb you can order a magnetically switchable device ... which I did not have available for a short…
A Christmas globe with "Merry Christmas!" in binary cut out in a helix. The bottom lid is so you can put a light fixture inside. I recommend an LED tealight. Note that the model is such that in a perfect print, the bottom would just fall…
These diffuser and shader caps are designed to reduce and direct light from ceiling mounted MR16, GU5.3 LED bulbs - perfect if your bulbs are too bright or scatter too much light. A great solution for balancing light levels without…
This is a shroud to cut down on glare from a hanging LED that's not covered by a shroud/reflector already. This is designed around the Amazon Basics 60 watt equivalent LED bulb. You should be able to scale in your slicer for larger LED…
Rotate it - it looks different from every angle! This ornament looks great in any color – solid, rainbow, multi-color, transparent, or glow-in-the-dark. There are 3 other ornaments in this series – a finial, a topper, and a “stretch”…
If you are installing C9 Christmas light bulbs on your house and run into a spot where you'd rather not have the light showing, try this cap in place of the C9 cover. This works great on transitions from gutter clips to shingle clips to…
Suction bulbs for standard EKG/ECG machines' electrodes. I recommend using FLEX/TPU, printing with a 0.4mm nozzle, 0.20 layers hight, and 10% infill, depending on the hardness of the filament used (the examples were printed with Tinmorry…
This is the ornament that started it all this year! The first in the Swoop series. There are 2 other ornaments in the Swoop 1 series – a finial and a “stretch” ornament. I'll be publishing a new ornament every day this season! Follow me…
Cup to hold H11 55W lightbulb. Can be used for load testing of automotive or other 12V circuits. The cup prevents bulb burning your hand or car interior while testing. There are small holes in the cup wall to allow better visivility of…
A remix of the Bulbasaur design, with the added christmas ornament hook by Steelfox and Acronce https://www.thingiverse.com/thing:3251333 https://www.thingiverse.com/thing:3281679 I added the compatibilty with Lego bricks
This is the first in a series of Christmas balls based on kaleidoscope patterns. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs very little! I'll be…
Good morning, Welcome to my profile, full of models and miniatures :-) I have Pokemon Bulbasaur for you, just for fun. Very nice characters. It is suitable for coloring. My kids absolutely love it :-). Important: If by chance the…
This is a holder to attach a flower bulb. You can add feathers to make it look like a hen. I used hyacinth bulbs. This is my gift for Grandmother's Day. I got the idea from the Internet. I printed it with 100% infill and 0.2mm layer…
This is a Lead Bulb Mold for Marblehead Class RC. The Ballast is divided in 4th pieces, symmetrically. The overall lenght is 350mm, and the weight is something near between 3000-3300Kg. The halves were divided in the center of mass of the…
Solar light bulb shaped lens. Examples printed using PETG without supports. Small (1x scale) bulb with post or bracket mounting and large (2x scale) post mounted with threaded sleeve. Transparent bulbs are more subtle in daylight, White…
🌌 ¡El compañero perfecto para empezar tu aventura en estilo Funko! Capturamos la esencia del #001 de Kanto: bulbo luminoso, ojos curiosos y actitud valiente que define a este clásico atemporal. 💡 TU PRIMER POKÉMON EN 3D: 🍃 Figura 10cm:…
These diffuser and shader caps are designed to reduce and direct light from ceiling mounted MR16, GU5.3 LED bulbs - perfect if your bulbs are too bright or scatter too much light. A great solution for balancing light levels without…
Replacement for standard bike bulbs including current limiting resistor. I converted my bike to use an old vape battery instead of the standard dynamo and replaced my bulbs with these ones. Printing needs quite a bit of detail but works…
Nice little light bulb that you can but on your tree, or have on display.
Бульбамех из игры Clair Obscur: Expedition 33 (Bulbomech)
WARNING! CHECK LAMP SHADE SIZE! THE LAMP SHADE OPENING MUST HAVE AN OPENING DIAMETER OF 2.71" (68.83 mm)! A reviewer made me aware that their SOLKLINT lamp has a lamp shade with a smaller opening than mine by 4-5 mm. It seems that either…
Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.2 Number of perimeters ... 2 Infill ...................................... 0% (only two layers) Supports ............................. no…
IKEA MOLNART cylinder bulb: https://www.ikea.com/ca/en/p/molnart-led-bulb-e26-150-lumen-cylinder-glass-striped-00586770/ IKEA TVÄRHAND lamp: https://www.ikea.com/ca/en/p/tvaerhand-table-lamp-black-bamboo-60518410/
A flange to fit to HVAC UV bulbs to mount to HVAC casing. The UV system that I bought (vevor) originally had flanges on the bulbs, which i used to mount to the HVAC case. I couldn't find any replacement bulbs that were the right wattage…
Tento model je inspirován oblíbenou animovanou postavičkou známou pro své rostlinné rysy a dobrodružného ducha. Zachycuje postavy prostřednictvím detailního designu.
just a socket for a w5w bulb for hardware works in your car... DESCRIPTION: no soldering - all you need is a printed part, w5w light bulb and two 0.5mm2 wires (optionally multimeter pins for the other ends - you can use even nails or pice…
Have lamp with no ability to power via a chord so make this hanger to use 2 battery rechargeable bulb. Required 2 bulbs because 1 battery bulb is generally too dim to be of any use. Bulbs spaced 6" apart. 2 non-tapered threaded sockets to…
I had previously purchased one of those decorative Legami lightbulbs , and was disappointed by the fact that it didn't come with any stand to help display it. The Legami lightbulbs use an E40 lightbulb, so I designed the main body of the…
This is probably a very niche problem, but who knows. Someone may find it useful. So I bought new headlights for my 2013 Grand Cherokee and they had this space for a bulb but my car didn't have a bulb to go there. I didn't want to just…
Bulbasaur se presenta en una postura tranquila y equilibrada, apoyado firmemente sobre sus cuatro patas. Su expresión serena y ojos grandes transmiten una personalidad noble y amigable. El bulbo dorsal voluminoso añade contraste visual…
Allows you to connect an LED indicator light to an older head. MK4-S PLA Nozzle – HF 0.4 Layer - 0.3 Fill 20%
Motivation I found this nice model of "Helferlein / Little Helper" by DIY Wizard (based on the popular model "Dummy 13"). To illuminate the bulb you can order a magnetically switchable device ... which I did not have available for a short…
Motivation I found this very nice model of "Helferlein / Little Helper" by DIY Wizard (based on the popular model "Dummy 13"). When I tried to print the model, the lamp socket available only resulted in minor quality parts when printed…
Add a classic yet modern silhouette to your interior with this spherical vase from our "Ribbed Collection." The design features a voluminous, bulbous body that tapers into a narrow neck, perfect for holding a few stems of dried flowers,…
A stunning centerpiece for your table or shelf. This vase combines a classic bulbous silhouette with a narrow, flared neck, modernized by deep vertical ribs (fins) around the entire perimeter. Design Highlights: Deep Texture: The vertical…
Made from TPU this allows it to push into original hole and grip bulb holder. Do not use 5w bulb keep to original max 3w
Repurposing old Aquarium equipment, because these bulbs are kind of outdated I couldn't find a ballasting unit that shades from either side in my area I made this canopy to fit 8mm Aluminum Rods that are secured by an M5, and an M4 bolt…
My dog chewed up the original nozzle so I created a replacement.
The lampshade is printed from transparent plastic. It is strictly forbidden to use powerful lamps, over 15 watts. The lampshade is necessary to prevent oxidation of the lamp socket contacts.
Bring strength and movement to your collection with the Bulbassaur Flexi Articulated model! for makers who love flexible, poseable, and easy-to-print models. This Flexi design features built-in articulations, allowing the model to print…
Add a soft and elegant touch to your easter and spring décor with these charming hyacinth-inspired bulb decorations. Designed with a rounded, ribbed base and stylized leaves, these pieces capture the look of blooming spring bulbs in a…
This mount allows you to display the Bulb Fiction Kitty bulb or any ~40mm wide object on an IKEA Skadis. You will need to print with supports to allow the hook to be printed. This height offset gives a better rotational moment for the…
Overview I can't imagine this will be super useful to anyone, as it was custom-designed for the light fixtures on my ceiling, but wanted to upload it anyways for posterity. A while ago I bought some 800 lumen smart bulbs for my room, not…
✨ Discover Hundreds of Exclusive 3D Models at TriDimen Studio! ✨ 🎨 Love high-quality 3D designs? Join TriDimen Studio on Patreon and unlock hundreds of premium 3D models, updated regularly for makers, collectors, and creators worldwide. 👉…
This is a hand crank-able turntable with a lightbulb in the center. You can use it to display lithophanes and generally anything. This is a mechanical turntable, not an electronic turntable. You have to manually crank the gear to spin it.…
Patreon : https://www.patreon.com/cw/Vividprintwork Commercial $10/month For sellers and commercial use Require Glue Loose fit Setting: Top and Bottom Piece Set Layer Height to .12 for better layer line OPTIONAL Seam: Set Top and Back…
These are replacement bulb holder assemblies for my 1974 Mercedes-Benz W115 230.4, second series with the ribbed tail lights. The car has been unsafe to drive for several years because of unreliable brake/tail/turn lights, caused by…
This is a Bulbasaur keychain, one of the three starter Pokémon from the Kanto region, specifically the Grass-type one. It was printed with an Elegoo Centauri Carbon, only one color change is needed, so it can be done manually, without a…
A replacement headlight cover for Audi TT mk1 . This part has the coresponding gasket too. Main cover recomandations: PETG or better, 4-5 perimeters, 25%infil, supports, print it the way its oriented for maximum stenght. Gasket…
Candelabra Bulb Cap for Dark Sky to reduce the BUG rating of outdoor light fixture. B (backlight) U (uplight) G (glare) is a Dark Sky International rating.
Take control over your LiIon batteries. This simple device applies different loads to your battery. Keep control! Two simple bulbs (12V/5W) which you can switch separately. 0 or 1 or 2. During testing phase you can watch and survey the…
Light Bulb Organizer (Modular & Stackable) Tired of loose bulbs rolling around in drawers? This 3D printable light bulb organizer keeps your bulbs safe, organized, and easy to grab when you need them. The design uses a cylindrical form…
Like OEM reproduction of the factory headlight rear cover for all 04-05 Imprezas the “blob eye”, I've added 3 varieties and the gasket that sits between it and the headlight housing. This may fit other cars but I can only confirm the…
print in petg - pla causes it to weaken. t5 reflective cover attachment
https://www.printables.com/model/238-low-poly-charmander https://www.printables.com/model/237-low-poly-squirtle https://www.printables.com/model/239-low-poly-bulbasaur https://www.printables.com/model/240-low-poly-totodile…
The original model colours do not come through on prusa slicer so I painted the model. Its not easy to paint, smart fill did a portion but then need small sphere and triangle painting to get the detail. Uploaded the colour file for others…
It's just a nice totally normal keychain… Its nice.
Double-bulb fluffy lamp. Printed with white non-transparent PETG filament, hence the need for more lightbulbs. I attached a ceiling mount model designed to accommodate dual cables. Printed on Anycubic Kobra 2 Pro. After several attempts,…
Mario Power-UP Lamp by Polymeria The Mario Power-Up Lamp by Polymeria brings a touch of the Mushroom Kingdom to any space, glowing with that unmistakable retro gaming charm. Featuring an innovative chuck-style fixture, it securely holds…
Lightbulb Sun - 2000 And after all the time I spent with you, summer went away and we just weren't the same I love Steven Wilson and Porcupine Tree's music, so I created a set of 3D printable abstractions to represent his discography.…
There is never enough room on your bedside table for every function you need it to perform...... Light/ Lamp, book rest, phone space/charger, kindle space/charger, ear plugs, earrings, watch, charging cables etc. How do you then stick a…
A Bulbasaur with a space in the back so you can put your controller.
Updated 4/1/25: At user request added ¼" hole spacing and a 10mm version for smaller seeds. While i was editing the model i also made a few other variations. I found the original a little small for some of the garlic i was planting so…
Prints best if you use the Adaptive layers feature. Assuming a 0.4mm nozzle, use a minimum layer height of .15mm and an upper layer height of .25mm so it can print the threads well, but also print the thin end quickly. 100% infill works…
Simple bulb holder made specifically for the wash bulb included with Debrox Ear Wax Removal kits. 1/1/25 Added a v2 model with a more substantial support.
Variation on Spiral Fidget 👉 Christmas Light Bulb 🎄 This is not as simple a design to print as it might seem. Start printing LampExt.stl first, usually problems arise with this file, the part breaks in the base area. It seems to me that…
The Tall Bulb-Shaped Vase is an elegant and stylish piece that combines classic and contemporary design elements. Its unique bulbous form transitions gracefully into a slender neck, making it an ideal centerpiece for any room. Perfect for…
The Bulb Vase is a uniquely shaped decorative piece inspired by the natural form of a flower bulb. This vase features a rounded base that tapers gracefully into a narrow neck, creating an elegant and organic silhouette. It's ideal for…
I've included some pre-made STL files. If you don't see the size you need, please message me/comment and I will add it. Print in vase mode, upside down: I printed with no bottom, leaving the top open (like a funnel). You could also print…
Bulbasuar Pokeball 2d art :-) print in 2 mm Hight follow in makerworld Turbo9670 for more :-)
Cortador de Galletas inspirado en eevee, obra no comercial
Made a bulb socket plug for unused sockets for outdoor lights (Hampton Bay Socket Incandescent String Light Set) Category: Replacement Parts
The keel is cast lead, so I wanted to enclose it to minimize lead exposure, and avoid drilling lead. This is case for Independence RC sailboat from Chesapeake Light Craft:…
Bulbasaursax hope you enjoy :-) Print in 2 mm Hight :-) follow and like for more. Makerworld: Turbo9670
Working on the first 151 to become lightboxes. Enjoy! Let me know how these print. We made the USB hole about 12mm. Please adjust/cut to the size of your cord/wires.
This is a shroud to cut down on glare from a hanging LED that's not covered by a shroud/reflector already. This is designed around the Amazon Basics 60 watt equivalent LED bulb. You should be able to scale in your slicer for larger LED…
Basically remixed it as a topper for lego-compatible articulated octupus base, however it can also be used as random sculpture in your LEGO diorama, or just a standalone bust figure. As it has a surprisingly thin waist i first done it…
This ghost costume is easy to print, though I recommend adding supports inside the ghost—particularly in the space between the head and the bulb—for optimal results. However, it can also be printed without supports. For the best surface…
I used tpu so it will fit snugly around a c19 led bulb but not the standard c19 bulb. I used a round head bolt as it is easier to use with the revolve function over a hex bolt. I have the standard c19 bulb using a hex bolt but did it…
Here's an elegant, quick print for the tree. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs less than 11g! I'll be publishing a new ornament every day!…
🌟 ¡Llamando a todos los entrenadores Pokémon y coleccionistas de Funko! 🌟 ¿Eres un auténtico fan de Pokémon? ¡Estos modelos únicos de funkos están hechos para ti! 🐉⚡ Sumérgete en el mundo Pokémon y lleva a casa a tus personajes favoritos…
Update 2023-09-03: Uploaded additional variant without a drain hole This Bulbasaur Planter will decorate your window sill or sideboard or… every place! Fits: Scale 100%: Every standard 5-6 cm plant pot. Best to plant a succulent or smal…
Designed to be printed with MK4S and MMU3, came out well at 0.20mm SPEED and Prusament PETG. After printing the first one I decided to then print then at 160% scale, making the print much stronger. Prusa Slicer project file attached too.
I designed this trophy to fit into a base with a 10mm wide by 10mm long by 5mm tall square hole. Maybe add a bit of extra space for it to squeeze in.
While I've created over 20 “swoop” designs, I'll only be publishing a few. This is the first. The openings in the ornament really catch the light. This ornament looks great in any color – solid, rainbow, multi-color, transparent, or…
This is an MMU painted version of patrickart's bulbasaur model with a hole carved out in the back so that it can be used as a plant potter. I carved a tube through its butt as a drainage hole so that it's a proper pot. Very anatomically…
Rotate it - it looks different from every angle! This ornament looks great in any color – solid, rainbow, multi-color, transparent, or glow-in-the-dark. There are 3 other ornaments in this series – a finial, a topper, and a “stretch”…
Fence board hook light bulb chain holder for Avoalre G45 . I made two versions of this model, front and rear if you like. Because my right lamp chain have hooks in other side and i don't wanna combine with this and do mess with cable.
