Counting matching models…
Cover for the 9pin Joystick ports on the C64. Could glue in bit of antistatic foam for tighter fit if needed. I tested this on a C64 breadbin and the Ultimate64. Print Settings Printer Brand: Prusa Printer: I3 MK3S Resolution: .20 Infill:…
I made this Remix in order to have the print fit my smaller size printer (Anet AM8). Cut up into several pieces, I printed it all in 3 batches: Middle as seperate print, Left & Right side combined, and alt as 1 large print (BARELY fitting…
The cartridge case all inclusive! PCB holders sized to be compatible with the commodore cartridges. Single screw hole. Tooth to prevent wrong insertion in the Commodore expansion port. Easy to print and to use, NO rafts required, no…
A case for an RGBToHDMI with the optional TTL Buffer Board and DB9 TTL video input. Designed for resin printing but FDM may be possible. You will need: A Pi Zero An RGBToHDMI…
Hello, this is a housing for the retro joystick project by Joyweiler for variant 5 with strip grid board and display. Many thanks for sharing the joyweiler project on gitlab and for allowing us to add a link to this project:…
Display Stand for Commodore C128
This is a full set of 4 wedges that go under the 4 top row screws of the C128 keyboard. Without these wedge spacers, you risk breaking the mounting holes and the keyboard will not tighten correctly to the top cover. Print Settings Printer…
CAUTION: Do not get burns from heated water and kettles. Requirements for kettle.stl: M3x10 heat set insert M3x10 stainless screw 3x10x0.8 stainless washer Requirements for kettleM5.stl: M5x25 or M5x20 stainless screw 5x10x0.9 stainless…
This is a small and simple part, but vital for the correct functioning of the appliance. it is positioned at the rear, at the bottom. With time and limescale, the original piece can be damaged and the overflow probe no longer works…
I needed a bunch of keyboard plungers to fix up an old “flat” Commodore 128, so I went looking for something suitable. Turns out there are at least TWO variations of the “flat” C128 keyboard assembly. While searching, I found these two…
For the v5 board Access to all the ports & switches plus hole to see the LED. Recommend gluing the case together although the lid does fit snug.
