Counting matching models…
After trying different ways to mount my Logitech c920 onto my Ender 3, I decided I wanted a way to mount the camera off the bed or Y axis. I came across @SCHEMENKE's design for an iPhone mount and thought it was a brilliant design. So,…
I could not find a good privacy cover for the Logitech C910 webcam, so I made my own. This thing is heavily influenced by the excellent C920 privacy cover by OnlyTono . The privacy cover consists of two pieces. The base goes on top of the…
This is a remix for mounting a Logitech C910 webcam. For a custom look, I lofted it to align with the back of the C910 geometry once the stock hardware is removed. Hint - you have to peel back most of the padding to get to the screws,…
Mount I designed for my RatRig V-Core 1.3 to hold a Logitech C920 webcam, angled downwards at 20 degrees so it can see the entire bed. This fits 2020 extrusion and mounts with M5 T-nuts. There s a clearance hole for a standard ¼" tripod…
I've been using a Logitech C910 as my Octoprint camera for as long as I've been using Octoprint. I've had a bunch of different ways to mount the camera, and this is yet another. Once all the stock mounting junk is removed from the C910,…
About the design I had purchased many of these web cam devices for my workplace, and some of the packages did not include the privacy covers. This is my interpretation of the stock cover with some changes. This design uses a hinge pin,…
I made a few small tweaks to Blue's design to the support the Logitech C910. I'm using an M3-35 screw and M3 Nyloc nut. You need to remove the mounting base but the pathway is set. The tolerances are tight so pre-thread the screw through…
Meet the Webcam Arm Lamp Truss or WALT for short, he's here to hold your webcam and remind you to smile while you Skype. This is an upgrade of my original Logitech C910 webcam mount in an attempt to increase both it's functionality and…
This is my first project using Autodesk Fusion 360 (my new 3D printer Prusa MK4S too). The design uses 1.75mm filament for the hinges. I've used parameters in Fusion 360 to ensure proper fit, including: Spacing tolerance Chamfers…
This mount fits the body of the Logitech C910 once the original mounting hardware is removed. The mount fits over the back of the camera and can be secured into place using a M4x22 bolt. There is also a flange that the camera fits into on…
Summary A remix form the nicely designed Logitech Webcam mount. This one is made for the C910 / C920 which you can tighten with a screw with a M6 bolt directly in the simrig. It's adjustable in height so it's usable for different monitor…
This is a holder for a partly dissasembled Logitech C910 webcam, designed to fit the RATRIG VCORE 3.1 enclosed version
Print Settings & Hardware Nozzle: 0.4 mm Material: PETG recommended for durability. Hardware Required: 2x M5*25 screw and nut . Supports The model is designed to be mostly support-free. However, for the best results, I recommend adding a…
A mount for the Logitech C910 webcam for the Prusa MK3.5S to be used with PrusaConnect by running it via RSTP on a Pi. All parts can be printed in PLA or PETG, settings don't matter too much but I would use at least 3 walls for rigidity.…
Print Settings & Hardware Nozzle: 0.4 mm Material: PETG recommended for durability. Hardware Required: 2x M5*25 screw and nut . Supports The model is designed to be mostly support-free. However, for the best results, I recommend adding a…
This is a remix because I liked this design but did not want to buy a new camera. I had a Logitech C910 so I just tweaked the design to fit my camera. I printed it with the flat longer side on bed then it did not need any supports. I hope…
Remix I made to work with my Logitech C910 Category: 3D Printer Parts
With this remix you can fix your Logitech C910 webcam fix on your Ender 3 printer. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: Gembird PLA White Notes:…
The Logitech C910 is a 1080p USB webcam. It produces clear and sharp images which can be fed into your PC for remote monitoring. I use it to monitor by 3D printer progress. The problem with the C910 webcam is it doesn't have a…
https://github.com/3devangelist/Complient_mechanisms_learning_experience/blob/main/Exercices/1%20-%20webcam%20mount/README.md
The Logitech C910 Webcam makes a good camera to watch over my 3D printer as it prints. To help the C910 work better, it needs the area under view well lit. This design a fitting on the C910 to attach a COB LED strip to light up the work…
I wanted to have my Logitech C910 webcam connected to the z-axis, so I combined and adjusted 2 models to fit. Settings: Layer Height: 0.2mm Print Speed: 120mm/s Infill: 20% Generate Supports: Yes - Baseplate Only. Adhesion: None or Skirt…
May work for other webcams with similar rear mounting. Assumes a roughly 7.5mm hole to mount in. Parameterized F3D included if you want to tinker. You will also need one M3x20 bolt and nut. Mounting from below instead of from directly…
